DOWNLOAD Sharp LC-50LE761K Service Manual ↓ Size: 37.82 MB | Pages: 127 in PDF or view online for FREE

Model
LC-50LE761K
Pages
127
Size
37.82 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD
File
lc-50le761k.pdf
Date
PREV: Sharp LC-50LE751K (serv.man25) Service Manual / Technical Bulletin

Sharp LC-50LE761K Service Manual ▷ View online

9
LC-42/50LE762
LC-42/50LE761
LC-42/50LE760
English   - 7 -
Package Contents
TV
Remote Control
LED TV
Batteries: 2 X AAA
Quick Guide
1 X Video & Audio Connection 
Cable
4 x 3D Glasses
Nero media home CD
Note: You should check the accessories after purchasing. 
Make sure that each accessory is included.
As the manufacturer’s specification supports 
communication on cable lengths shall be smaller 
than 3m.
TV Control button & Operation
1.  Standby / On button
2.  TV/AV button
3.  Programme Up/Down buttons
4.  Volume Up/Down buttons
Note: Press Volume Up/Down buttons at the same to view 
main menu and use Prpgramme Up/Down buttons to navigate 
and Volume Up/Down buttons to change value.
, switch is used for turning the TV on or off. 
The position of the control buttons and power switch 
may differ depending on the model.
Connect Power
IMPORTANT: The TV set is designed to operate on 
220-240V AC, 50 Hz socket. After unpacking, allow 
the TV set to reach the ambient room temperature 
before you connect the set to the mains. Plug the 
power cable to the mains socket outlet.
Antenna/Cable/Satellite Connection
Connect the aerial or cable TV plug to the AERIAL 
INPUT (ANT.) or satellite lead to the SATELLITE 
INPUT(LNB) located on the rear side of the TV. 
“Satellite is only available in 762 series”.
Rear side of the TV:
SATELLITE
AERIAL
CABLE
Note: Satellite support is depending on the model.
(only available in LC-42LE762E / LC-42LE762EN / 
LC-50LE762E / LC-50LE762EN series)
Installing The Batteries Into The 
Remote
• Remove the back cover to reveal the battery 
compartment.
• Insert two size AAA batteries. Note the correct 
polarity(+ or -). Do not mix old and new batteries. 
Replace only with same or equivalent type. 
• Place the cover back on.
Angle of the remote control unit
Use the remote control unit by pointing it towards the 
remote control sensor.
Objects between the remote control unit and sensor 
may prevent proper operation.
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. 
In addition, do not expose the remote control unit 
to liquids, and do not place in an area with high 
humidity.
       OPERATION MANUAL -  Continued
10
LC-42/50LE762
LC-42/50LE761
LC-42/50LE760
English   - 7 -
Package Contents
TV
Remote Control
LED TV
Batteries: 2 X AAA
Quick Guide
1 X Video & Audio Connection 
Cable
4 x 3D Glasses
Nero media home CD
Note: You should check the accessories after purchasing. 
Make sure that each accessory is included.
As the manufacturer’s specification supports 
communication on cable lengths shall be smaller 
than 3m.
TV Control button & Operation
1.  Standby / On button
2.  TV/AV button
3.  Programme Up/Down buttons
4.  Volume Up/Down buttons
Note: Press Volume Up/Down buttons at the same to view 
main menu and use Prpgramme Up/Down buttons to navigate 
and Volume Up/Down buttons to change value.
, switch is used for turning the TV on or off. 
The position of the control buttons and power switch 
may differ depending on the model.
Connect Power
IMPORTANT: The TV set is designed to operate on 
220-240V AC, 50 Hz socket. After unpacking, allow 
the TV set to reach the ambient room temperature 
before you connect the set to the mains. Plug the 
power cable to the mains socket outlet.
Antenna/Cable/Satellite Connection
Connect the aerial or cable TV plug to the AERIAL 
INPUT (ANT.) or satellite lead to the SATELLITE 
INPUT(LNB) located on the rear side of the TV. 
“Satellite is only available in 762 series”.
Rear side of the TV:
SATELLITE
AERIAL
CABLE
Note: Satellite support is depending on the model.
(only available in LC-42LE762E / LC-42LE762EN / 
LC-50LE762E / LC-50LE762EN series)
Installing The Batteries Into The 
Remote
• Remove the back cover to reveal the battery 
compartment.
• Insert two size AAA batteries. Note the correct 
polarity(+ or -). Do not mix old and new batteries. 
Replace only with same or equivalent type. 
• Place the cover back on.
Angle of the remote control unit
Use the remote control unit by pointing it towards the 
remote control sensor.
Objects between the remote control unit and sensor 
may prevent proper operation.
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. 
In addition, do not expose the remote control unit 
to liquids, and do not place in an area with high 
humidity.
English   - 8 -
• Do not install or place the remote control unit under 
direct sunlight. The heat may cause deformation 
of the unit.
• The remote control unit may not work properly if 
the remote control sensor of the TV is under direct 
sunlight or strong lighting. In such cases, change the 
angle of the lighting or the TV, or operate the remote 
control unit closer to the remote control sensor.
Switching On/Off
To Switch the TV On
Connect the power cord to the mains socket. Switch 
the “
” button on the TV to position “|” so the TV 
will switch to standby mode. Then the standby LED 
lights up.
To switch on the TV from standby mode either:
• Press the “
” button, 
P+ / P- or a numeric button 
on the remote control.
• Press the “
” or 
P/CH+/- button on the TV.
The TV will then switch on.
To Switch the TV to Standby
To switch the TV to low power standby press the “
” 
button on the remote control or on the TV.
To Switch the TV Off
Switch  the  “
”  button  on  bottom  of  the  TV  to 
position 2 as illustrated - 
, to isolate the TV from 
the mains, the LED will  go out.
English   - 8 -
• Do not install or place the remote control unit under 
direct sunlight. The heat may cause deformation 
of the unit.
• The remote control unit may not work properly if 
the remote control sensor of the TV is under direct 
sunlight or strong lighting. In such cases, change the 
angle of the lighting or the TV, or operate the remote 
control unit closer to the remote control sensor.
Switching On/Off
To Switch the TV On
Connect the power cord to the mains socket. Switch 
the “
” button on the TV to position “|” so the TV 
will switch to standby mode. Then the standby LED 
lights up.
To switch on the TV from standby mode either:
• Press the “ ” button, 
P+ / P- or a numeric button 
on the remote control.
• Press the “ ” or 
P/CH+/- button on the TV.
The TV will then switch on.
To Switch the TV to Standby
To switch the TV to low power standby press the “ ” 
button on the remote control or on the TV.
To Switch the TV Off
Switch  the  “
”  button  on  bottom  of  the  TV  to 
position 2 as illustrated - 
, to isolate the TV from 
the mains, the LED will  go out.
       OPERATION MANUAL -  Continued
11
LC-42/50LE762
LC-42/50LE761
LC-42/50LE760
English   - 34 -
Dimensional Drawings
42240
50240
Note: The unit of the measurements is mm.
    [1] DIMENSIONS 42” 
NOTE:  The Unit of the measurements is mm.
       CHAPTER 3. OPERATION MANUAL 
12
LC-42/50LE762
LC-42/50LE761
LC-42/50LE760
English   - 34 -
Dimensional Drawings
42240
50240
Note: The unit of the measurements is mm.
NOTE:  The Unit of the measurements is mm.
    [2] DIMENSIONS 50” 
Page of 127
Display

Click on the first or last page to see other LC-50LE761K service manuals if exist.

RANDOM: