Sharp LC-46XL2E (serv.man3) Service Manual ▷ View online
LC-42XL2E/S/RU, LC-46XL2E/S/RU, LC-46X20E/S/RU, LC-52XL2E/S/RU, LC-52X20E/S/RU
2 – 29
Wire "LC", "LA1" to WH
Wire "LC" to WH
Wire "LW" to WH
Wire "LW" to WH
#For EMC
Set Wire "LW" under other wires
Wire "FR" to WH
Wire "LC","PL","FR" to WH
Wire "LC","FR" to WH
Wire "KM"
Wire "LW"
Wire "PL"
Wire "FR"
Wire "LA1"
Wire "LB"
Wire "LA2"
Wire "VD"
FFC "HM"
Wire "US"
for Wire "KM"
#Wind Wire "KM" one time to core
Set taping to core inside.
To Main PWB
To Key PWB
Wind wire "KM" one
time to core.
#For EMC,Set Wire "LW" under other wires.
LC-42XL2E/S/RU, LC-46XL2E/S/RU, LC-46X20E/S/RU, LC-52XL2E/S/RU, LC-52X20E/S/RU
2 – 30
6. Remove the R/C, LED Unit.
7. Remove the 4 lock screws
. and detach the CTL SHIELD.
R/C, LED PWB
Wire "RA"
from OBON
Wire "RA"
R/C, LED PWBFront side
LED PWB Back side
Pull out Wire "RA" from bottom
1st,Set R/C, LED PWB Under LIB
R/C, LED PWB
(with wire)
Next,Push PWB hooked
#Set PWB to gide lib surely
Wire "RA" to WH
Set Wire "RA" to
panel hollow.
7
7
LC-42XL2E/S/RU, LC-46XL2E/S/RU, LC-46X20E/S/RU, LC-52XL2E/S/RU, LC-52X20E/S/RU
2 – 31
8. Remove the 1 lock screw
, and the 11 lock screws
. Detach the Chassis Tray and MINI AV Sub Ass’y.
9. Remove the 14 lock screws
. and detach the Panel Support Angle.
8
9
Wire "LC"
9
MINI AV SUB ASSY
CHASSIS TRAY
8
10
PNL SUPPORT ANG
Wire "LC"
10
LC-42XL2E/S/RU, LC-46XL2E/S/RU, LC-46X20E/S/RU, LC-52XL2E/S/RU, LC-52X20E/S/RU
2 – 32
10.Remove the 8 lock screws
, and the 6 lock hooks
. Detach the LCD Panel Module.
11
12
11
LCD MODULE
Wire "LC"
12
Click on the first or last page to see other LC-46XL2E (serv.man3) service manuals if exist.