DOWNLOAD Sharp LC-46LE631E (serv.man2) Service Manual ↓ Size: 10.49 MB | Pages: 127 in PDF or view online for FREE

Indicates lead-free solder of tin, silver and copper.

“ALL  PWB” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the 
PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.
Example:

When fi xing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead 
wire solder may cause damage or accident due to cracks.
As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40°C, we recommend you to 
use a dedicated soldering bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our 
service station or service branch in your area.

As the melting point of lead-free solder (Sn-Ag-Cu) is about 220°C which is higher than the conventional lead solder by 
40°C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended 
period of time. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be 
exceeded, remove the bit from the PWB as soon as you confi rm the steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and 
off the power of the bit as required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every 
use of it.
When the tip of the soldering bit is blackened during use, fi le it with steel wool or fi ne sandpaper.

Be careful when replacing parts with polarity indication on the PWB silk.

Lead-free wire solder for servicing.

Indicates lead-free solder of tin, silver and nickel.

Sn-Ag-Ni

Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!

Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires 
proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used 
electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local 
retailer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.

If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately 
beforehand according to local requirements.

By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human health which could otherwise 
arise due to inappropriate waste handling.

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t 
purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.

If the product is used for business purposes and you want to discard it:

Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for 
the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local 
collection facilities.

For Spain: Please contact the established collection system or your local authority for take-back of your used 
products.

If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.

Attention: Your product 
is marked with this 
symbol. It means that 
used electrical and 
electronic products 
should not be mixed 
with general household 
waste. There is a 
separate collection 
system for these 
products.

The battery supplied with this product contains traces of Lead.

For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! 
There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with 
legislation. Please contact your local authority for details on the collection and recycling schemes.

For Switzerland: The used battery is to be returned to the selling point.

For other non-EU countries: Please contact your local authority for correct method of disposal of the used battery.

EN  What’s in the box 
DE  Lieferumfang
FR  Contenu de l’emballage
NL  Wat zit er in de doos?
IT  Contenuto della confezione
ES  Contenido de la caja
PT  Conteúdo da embalagem
DK  Hvad er der i kassen
SV  Förpackningens innehåll
NO Innholdet i esken
SU Toimituksen sisältö
GR ȆİȡȚİȤȩȝİȞĮ ıȣıțİȣĮıȓĮȢ
RU  Ʉɨɦɩɥɟɤɬ ɩɨɫɬɚɜɤɢ
PL  ZawartoĞü opakowania
HU  A doboz tartalma
SK  ýo je v balení?
CZ Obsah dodávky
TR  Kutuda neler var
SI  Kaj je v škatli
RO Ce se aÀ ă în cuti
ET Kasti sisu
LV KomplektƗcija
LT  Kas yra rinkinyje
UK  Ʉɨɦɩɥɟɤɬɚɰɿɹ ɭɩɚɤɨɜɤɢ
HR  Što se nalazi u kutiji

Quick Start Guide

Information

Only

LE/LU/LX632E

Only

LE631E

Only

LE/LU/LX630E
LE/LU/LX632E

Only

 LE631E

(OPTICAL)

Only

LE/LU/LX630E
LE/LU/LX632E

Only

LE631E

VGA

Only

LE/LU/LX630E
LE/LU/LX632E

Only

LE631E

(OPTICAL)