View Sharp LC-46DH66 Service Manual online
Model: LC-46DH65E, LC-46DH65S, LC-46DH66E
Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovene, Spanish,
Swedish, Turkish, Ukrainian
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
colour TV. Please purchase them at your nearest shop.
future. When purchasing, please read the newest catalogue for
compatibility and check the availability
DTV: Select MHEG-5 and teletext for
Teletext: Stop updating teletext
pages automatically or release the
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
(Sweden, Norway, Finland,
Denmark, or Iceland) are selected
in the country setting from “Auto
Installation”, DTV services are four
digits. When another country is
selected, DTV services are three digits.
selected channel or external input.
Press to access digital TV mode.
Press to access conventional
analogue TV mode.
Select a video setting.
Exit the “MENU” screen.
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g.
EPG, MHEG-5, Teletext).
DTV: Display the EPG screen.
DTV: Switch between Radio and
radio broadcasting) is transmitted
by DVB, the radio broadcasting
will be skipped.
Press to display programme
information which is transmitted
through digital video broadcasting in
the upper left corner of the screen
Select the TV channel.
information (channel number, signal,
etc.) in the upper right corner of the
Press to schedule a time for the TV
to automatically standby.
“MENU” screen on/off.
This key does not work on this
If external equipment such as a
AQUOS BD Player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons.
Execute a command within the
ATV/DTV: Display the programme
list when no other “MENU” screen is
HDMI1 (HDMI) terminal
HDMI2 (HDMI/AUDIO) terminals*
OUTPUT (AUDIO) terminals
DIGITAL AUDIO OUTPUT terminal
EXT1 (RGB) terminal
EXT2 (RGB) terminal
COMMON INTERFACE slot
HDMI3 (HDMI) terminal
AC INPUT terminal
can both use the same audio input
terminal. However, the proper item
must be selected in the “PC Audio
and 4 long screws) with the stand unit.
onto the base using the 4 long screws with the
hex key (supplied) as shown.
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
the 4 holes on the rear of the TV.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent
it from being damaged.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.