Sharp LC-42XL2E (serv.man10) User Manual / Operation Manual ▷ View online
Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” alkaline size batteries.
• Place batteries with their terminals corresponding
to the (
k) and (l) indications in the battery
compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• When replacing the batteries, use alkaline batteries instead of manganese ones.
• Do not overuse the light-up function of the LIGHT
• Do not overuse the light-up function of the LIGHT
D button, doing so may shorten the battery life. Replace the batteries
when the light on the LCD window or the light-up function becomes weak or when the window becomes blurry.
• Do not continue to use the remote control unit with the batteries running low. This may result in error
message or malfunction. Should this happen replace the batteries and leave it unused for a while.
Otherwise, you may open the rear battery cover and press the RESET button. When you press the
RESET
Otherwise, you may open the rear battery cover and press the RESET button. When you press the
RESET
button, your Universal remote control settings will be deleted.
• The remote control unit has a internal memory of external devices. In order not to lose the data,
replace the batteries quickly. If the manufacturer code is initialised and lost, you can input the
manufacturer code again. (See page 38 - 41.)
manufacturer code again. (See page 38 - 41.)
• The batteries supplied with this product may have a shorter life expectancy due to storage
conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
1
2
2
3
Using the remote control unit
Use the remote control unit by pointing it
towards the remote control sensor. Objects
between the remote control unit and sensor
may prevent proper operation.
towards the remote control sensor. Objects
between the remote control unit and sensor
may prevent proper operation.
30°
30°
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place in an area
In addition, do not expose the remote control unit to liquids, and do not place in an area
with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
• The remote control unit may not work properly if the remote control sensor of the TV is
under direct sunlight or strong lighting. In such case, change the angle of the lighting or
TV, or operate the remote control unit closer to the remote control sensor.
TV, or operate the remote control unit closer to the remote control sensor.
RESET
button
6
5 m
Remote control sensor
LC-42XL2E-gb.indd 6
LC-42XL2E-gb.indd 6
2007/09/04 15:57:24
2007/09/04 15:57:24
Quick guide
Initial installation overview
Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
depending on your TV installation and connection.
Preparation
n
Connect antenna cable to the
antenna terminal. (Page 8)
o
If necessary, insert CA card
into the CI slot to watch
scrambled broadcasts.
(Pages 8 and 19)
scrambled broadcasts.
(Pages 8 and 19)
p
Connect the AC cord to the
TV. (Page 8)
n
Turn on the TV power with
a.
(Page 10)
o
Run the initial auto installation.
(Page 9)
✔ Language setting
English
Italiano
Svenska
✔ Country setting
Austria A B/G
Finland FIN B/G
Greece GR
B/G
✔ Channel search setting
Analogue Search
Digital Search
n
Congratulations!
Now you can watch TV.
o
If necessary, adjust the
antenna to attain maximum
signal reception. (Page 9)
signal reception. (Page 9)
n
Connect external
devices such as a
DVD as instructed.
(Pages 15 - 17)
DVD as instructed.
(Pages 15 - 17)
o
Connect external
audio devices such
as speakers/amplifier
as instructed.
(Pages 15 and 18)
as speakers/amplifier
as instructed.
(Pages 15 and 18)
1
Power on and
run the auto
installation
2
Watch TV
3
Start searching
channels
Connect
external devices
7
LC-42XL2E-gb.indd 7
LC-42XL2E-gb.indd 7
2007/09/04 15:57:24
2007/09/04 15:57:24
Before turning on the power
Quick guide
Supplying power to the antenna
You must supply power to the antenna in order to
receive digitally/terrestrially broadcast stations after
connecting the antenna cable to the antenna input
terminal on the back of your TV.
receive digitally/terrestrially broadcast stations after
connecting the antenna cable to the antenna input
terminal on the back of your TV.
1.
Press MENU and the menu screen displays.
2.
Press
c/d to select “Setup”.
3.
Press
a/b to select “Aerial Setup-DIGITAL”, and
then press OK.
4.
Press
a/b to select “Supply Voltage”, and then
press OK.
5.
Press
c/d to select “On”, and then press OK.
Setting the TV on the wall
• This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (Page 43) The use
of other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting
or mounting that results in accident or injury.
or mounting that results in accident or injury.
• You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.
• To use this TV mounted on a wall, first remove the adhesive tape at the 2 locations on the rear of the TV, and then use the
• To use this TV mounted on a wall, first remove the adhesive tape at the 2 locations on the rear of the TV, and then use the
screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
• When you mount the TV on the wall, you should attach the supporting post.
* Ferrite Core
The Ferrite Core should be permanently attached
and never removed from the AC cord.
and never removed from the AC cord.
Bundling the cables
8
1
. Carefully insert the
CI Module in the CI slot
with the contact side
forward.
with the contact side
forward.
Cable clamp
Bundle the
cables with the
clamp.
AC cord
Ferrite core*
Place the TV close to the
AC outlet, and keep the
power plug within reach.
Standard DIN45325
plug (IEC 169-2)
75
plug (IEC 169-2)
75
q coaxial cable
(For Europe, except
U.K. and Eire)
(For U.K. and Eire)
2
. The logo on the CI
Module must be facing
forward from the rear of
the TV.
forward from the rear of
the TV.
LC-42XL2E-gb.indd 8
LC-42XL2E-gb.indd 8
2007/09/04 15:57:24
2007/09/04 15:57:24
Quick guide
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Checking signal strength and
channel strength
channel strength
If you install a DVB-T antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
Press MENU and the menu screen displays.
Press
c/d to select “Setup”.
Press
a/b to select “Aerial Setup-DIGITAL”,
and then press OK.
E
Checking signal strength
Press
a/b to select “Signal Strength”.
Signal Strength
Supply Voltage
Channel Strength
Signal Strength
Quality
Current Max
0
CH No.
21
0
Current Max
0 0
E
Checking channel strength
Press
a/b to select “Channel strength”, and
then press OK.
• You can input a specified frequency band using 0 - 9
numeric buttons.
Signal Strength
Supply Voltage
Channel Strength
Signal Strength
Quality
Current Max
0
CH No.
21
0
Current Max
0 0
2 6 5
.
2
MHz
Position and align the antenna so that the
maximum possible values for “Signal Strength”
and “Quality” are obtained.
maximum possible values for “Signal Strength”
and “Quality” are obtained.
NOTE
• The values of “Signal Strength” and “Quality” indicate when
• The values of “Signal Strength” and “Quality” indicate when
to check the appropriate alignment of the antenna.
1
2
3
2
3
4
Press
a on the TV.
• The initial auto installation wizard appears.
Setting the on-screen display language
English
Italiano
Svenska
Setting the country (Location of TV set screen)
Austria A B/G
Finland FIN B/G
Greece GR
B/G
• The Location of TV set screen only appears during
the first installation.
Starting channel search
Analogue Search
Digital Search
• If you want to search for more broadcasts, execute
“Auto Installation” again from the Setup menu.
1
2
3
4
Confirm the following before turning on
the power
the power
E Is the antenna cable connected?
E Is the AC cord plugged in?
E Is the AC cord plugged in?
Press
a/b/c/d to select the desired language,
and then press OK.
Press
a/b/c/d to select your country or area,
and then press OK.
Press
c/d to select “Digital Search” or “Analogue
Search”, and then press OK.
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press
END
.
NOTE
• If you turn off the power on the TV after performing step 4,
• If you turn off the power on the TV after performing step 4,
the initial auto installation wizard does not appear. The auto
installation function allows you to execute the installation
again from the Setup menu. (Page 26)
installation function allows you to execute the installation
again from the Setup menu. (Page 26)
• The initial auto installation wizard will go off if you leave
the TV unattended for 30 minutes before searching for
channels in step 5.
channels in step 5.
5
9
LC-42XL2E-gb.indd 9
LC-42XL2E-gb.indd 9
2007/09/04 15:57:25
2007/09/04 15:57:25
Click on the first or last page to see other LC-42XL2E (serv.man10) service manuals if exist.