Sharp LC-42X20E (serv.man10) User Manual / Operation Manual ▷ View online
Basic adjustment
E
Sort
Channel positions can be sorted freely.
Press
c/d to select “Yes”, and then press OK.
Press
a/b/c/d to select the channel you
want to move, and then press OK.
Press
a/b/c/d to move it to the desired
position, and then press OK.
Repeat steps 3 and 4 until all desired channels
are sorted.
are sorted.
E
Erase Programme
An individual programme can be erased.
Press
c/d to select “Yes”, and then press OK.
Press
a/b/c/d to select the channel you
want to erase, and then press OK.
• A message screen pops up.
Press
c/d to select “Yes”, and then press
OK to erase the selected programme. All the
subsequent programmes move up.
subsequent programmes move up.
Repeat steps 3 and 4 until all desired channels
are erased.
are erased.
1
2
2
3
4
1
2
2
3
4
Fine
Colour sys.
Sound sys. (Broadcasting systems)
Channels with “Skip” set to “On” are passed over when using
P
P
r/Ps even if selected while watching the image from the
TV.
When connecting a decoder to the unit, you need to select
EXT1 or EXT2.
EXT1 or EXT2.
NOTE
• “Off” is factory preset value.
• “Off” is factory preset value.
You can block the viewing of any channel.
NOTE
• See “Child Lock” for setting a PIN.
• When Lock is set to “On” for a channel, “Child lock has
• See “Child Lock” for setting a PIN.
• When Lock is set to “On” for a channel, “Child lock has
been activated.” displays, and the image and sound of the
channel are blocked.
channel are blocked.
• When pressing
6 while “Child lock has been activated.”
displays, the PIN input menu will display. Inputting the
correct PIN lifts the child lock temporarily until the power is
turned off.
correct PIN lifts the child lock temporarily until the power is
turned off.
Analogue channel settings
Programme Setup
Setup
Analogue setting
You can reconfigure Analogue TV channels settings
automatically or manually.
automatically or manually.
E
Additional search
Use this menu to add new channels automatically after
auto installation has been made.
auto installation has been made.
• Start searching channels after selecting colour system and
sound system.
E
Manual Adjust
Use this menu to set up analogue TV channels
manually.
manually.
After selecting “Yes” on the screen, press
a/b/
c/d to select the channel you want to set and
the press OK.
the press OK.
You can adjust the frequency to the desired position.
NOTE
• Adjust while checking the background picture as a
• Adjust while checking the background picture as a
reference.
• Instead of pressing
c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0 - 9.
channel with 0 - 9.
EXAMPLE
• 179.25 MHz: Press 1
• 179.25 MHz: Press 1
s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4
s 9 s 2 s 5 s OK.
Select the optimum colour system to receive. (Auto,
PAL, SECAM)
PAL, SECAM)
Select the optimum sound systems (Broadcasting systems)
to receive. (B/G, D/K, I, L/L’)
to receive. (B/G, D/K, I, L/L’)
Skip
Decoder
Lock
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel names.
Installation detects the information and assigns a name
to it. However, you can change individual channel names.
Press
a/b/c/d to select each character of
the new name for the channel, and then press
OK.
OK.
Repeat step 1 above until the name is fully spelt
out.
out.
NOTE
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select “END” to
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select “END” to
set the channel name.
1
2
Label
27
LC-42X20E-gb.indd 27
LC-42X20E-gb.indd 27
2007/09/04 16:31:24
2007/09/04 16:31:24
Basic adjustment
Password/Parental lock settings
Child Lock
Setup
Allows you to use a PIN to protect certain settings from
being accidentally changed.
being accidentally changed.
Change PIN
Register a 4-digit password number to use the Child
Lock function.
Lock function.
Enter the 4-digit number as a PIN using 0 – 9.
Enter the same 4-digit number as in step 1 to
confirm.
confirm.
• “The system PIN has been changed successfully”
displays.
NOTE
• To view a locked channel, you must enter the PIN. (See
• To view a locked channel, you must enter the PIN. (See
pages 26 and 27 for locking channels from viewing in
analogue TV and DTV mode.) When you select a locked
channel, a PIN prompt message pops up. Press
analogue TV and DTV mode.) When you select a locked
channel, a PIN prompt message pops up. Press
6 to
display the PIN input window.
Cancel PIN
Allows you to reset your PIN.
NOTE
• As a precautionary measure, make a note of your PIN
• As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
keep it in a safe place that children cannot reach.
Parental rating
This function allows DTV services to be restricted.
It prevents children from watching violent or sexual
scenes that may be harmful.
It prevents children from watching violent or sexual
scenes that may be harmful.
NOTE
• “Universal viewing” and “Parental approval pref.” are ratings
• “Universal viewing” and “Parental approval pref.” are ratings
used exclusively in France.
• Refer to page 40 for details about ratings.
1
2
2
Language
Setup
You can select a OSD language from the Setup
menu. Select from among 22 languages. (Czech,
Danish, Dutch, English, Estonian, Finnish, French,
German, Greek, Hungarian, Italian, Latvian, Lithuanian,
Norwegian, Polish, Portuguese, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish)
menu. Select from among 22 languages. (Czech,
Danish, Dutch, English, Estonian, Finnish, French,
German, Greek, Hungarian, Italian, Latvian, Lithuanian,
Norwegian, Polish, Portuguese, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish)
Language Settings (language,
subtitle, multi audio)
subtitle, multi audio)
Subtitle
Digital Setup
Set up to 2 preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
subtitles for the hearing impaired) to display if subtitles
are available.
NOTE
• Subtitles will not be displayed when the service does not
• Subtitles will not be displayed when the service does not
contain subtitle information.
Digital Audio Language
Option
Set up to 3 preferred multi audio languages to display if
the audio languages are available.
the audio languages are available.
E
Switching the multi audio languages
Each time you press
2 on the remote control, the
audio language switches.
Key Lock
Option
This function allows you to lock the buttons on the
TV or remote control in order to prohibit children from
changing the channel or volume.
TV or remote control in order to prohibit children from
changing the channel or volume.
Item
Off:
Unlock the buttons.
RC Control Lock:
Lock all buttons on the remote control.
Button Control Lock:
Lock the buttons except the power
switch on the TV.
NOTE
• You cannot set both “RC Control Lock” and “Button
• You cannot set both “RC Control Lock” and “Button
Control Lock” at the same time.
Selectable items
E 1st language E 2nd language
E For hearing impaired
E For hearing impaired
E
Switching subtitle languages
E
Cancelling the lock
Press the MENU button on the TV and set to “Off” to
cancel the “RC Control Lock”. Press the MENU button
on the remote control and set to “Off” to cancel the
“Button Control Lock”.
cancel the “RC Control Lock”. Press the MENU button
on the remote control and set to “Off” to cancel the
“Button Control Lock”.
• Refer to page 23 for menu operation using MENU button
on the TV.
Each time you press
[
on the remote control, the
subtitle switches.
Set “For hearing impaired” to “Yes”
(For hearing impaired)
1st Language
2nd Language
Off
• • • • • • • •
Set “For hearing impaired” to “No”
1st Language
2nd Language
(For hearing impaired)
Off
• • • •
28
LC-42X20E-gb.indd 28
LC-42X20E-gb.indd 28
2007/09/04 16:31:25
2007/09/04 16:31:25
Useful Viewing functions
WSS
Setup
WSS signal 4:3 screen
Selecting the WSS picture size
automatically
automatically
4:3 Mode
Setup
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
to select between Panorama and Normal.
Selecting the WSS picture size
manually
manually
Item
Normal:
Normal range keeping 4:3 or 16:9 aspect ratio
Panorama:
Wide image without side bars
4:3 mode “Panorama”
4:3 mode “Normal”
Selecting the picture size manually
You can select the picture size. Selectable picture size
varies with the type of signal received.
varies with the type of signal received.
Basically, if you set WSS to “On” in the Setup menu,
the optimum Wide mode is automatically chosen for
every broadcast. You can however, change the screen
format manually as explained below.
the optimum Wide mode is automatically chosen for
every broadcast. You can however, change the screen
format manually as explained below.
NOTE
• Aside from manually changing the Wide modes as
• Aside from manually changing the Wide modes as
explained herein, the TV may detect and select the
optimum Wide mode according to the signal received.
optimum Wide mode according to the signal received.
Press
f.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable for
• The menu lists the wide mode options selectable for
the type of video signal currently received.
Press
f or
a/b while the WIDE MODE menu
displays on the screen.
• As you toggle the options, each is immediately
reflected on the screen. There is no need to press
OK
OK
.
1
2
NOTE
• Some items do not appear depending on the type of
• Some items do not appear depending on the type of
received signal.
Item (for SD [Standard] signals)
Normal:
Keeps the original aspect ratio in a full screen
display.
Zoom 14:9:
For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also see bars on
the top and bottom with some programmes
the top and bottom with some programmes
Panorama:
In this mode the picture is progressively
stretched toward each side of the screen.
Full:
For 16:9 squeeze pictures.
Cinema 16:9:
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Cinema 14:9:
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Item (for HD [High-Definition] signals)
Full:
Display with an Overscan image. Crops all sides of
screen.
Underscan:
Display with an Underscan image only when
receiving a 720p signal. Display with the High-Definition
image adjusted optimally. Noise may appear on the
edge of the screen with some programmes.
image adjusted optimally. Noise may appear on the
edge of the screen with some programmes.
Dot by Dot:
Displays an image with the same number
of pixels on the screen when receiving 1080i/1080p
signals only.
signals only.
WSS allows a television to switch automatically among
the different screen formats.
the different screen formats.
NOTE
• Use WIDE MODE if an image does not switch to the
• Use WIDE MODE if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
no WSS information, the function will not work even if
enabled.
29
LC-42X20E-gb.indd 29
LC-42X20E-gb.indd 29
2007/09/04 16:31:25
2007/09/04 16:31:25
You can use this menu to set the appropriate picture
size for viewing a 16:9 format TV programme on a 4:3
TV.
size for viewing a 16:9 format TV programme on a 4:3
TV.
Selecting the recording picture size
manually
manually
REC Picture Size
Digital Setup
Setting to “4:3 TV”
Setting to “16:9 TV”
This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using the EXT 4, 5 and 6 terminals.
appropriate picture size when viewing an HDMI signal
using the EXT 4, 5 and 6 terminals.
Selecting the HDMI picture size
automatically
automatically
HDMI Auto View
Setup
NOTE
• This function must be set before recording.
• This function must be set before recording.
Other Picture and audio settings
Adjusting image position
Position
Setup
For adjusting a picture’s horizontal and vertical position.
Item
H-Pos.:
Centres the image by moving it to the left or right.
V-Pos.:
Centres the image by moving it up or down.
NOTE
• Adjustments are stored separately according to input
• Adjustments are stored separately according to input
source.
• Depending on the input signal type or WIDE MODE setting,
a position setting may not be available.
Reducing noise on the screen
DNR
Option
DNR (Digital Noise Reduction) produces a clearer
image. (Off, High, Low)
image. (Off, High, Low)
Automatic volume adjustment
Auto Volume
Option
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
Clear Voice
Clear Voice
Option
This function emphasises speech against background
noise for greater intelligibility. It is not recommended for
music sources.
noise for greater intelligibility. It is not recommended for
music sources.
Audio Only
Audio Only
Option
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
can set the TV off and enjoy audio only.
Item
Off:
Both screen images and audio are output.
On:
Audio is output without a screen image.
Useful Viewing functions
30
LC-42X20E-gb.indd 30
LC-42X20E-gb.indd 30
2007/09/04 16:31:25
2007/09/04 16:31:25
Click on the first or last page to see other LC-42X20E (serv.man10) service manuals if exist.