Sharp LC-42SB55E Service Manual ▷ View online
2008-03-14
LC-26SB25E/S/RU, LC-32SB25E/S/RU, LC-42SB55E/S/RU
13
Fig.7
Fig.8
2. Remove the 5 screws and disconnect 2 cables. Detach the Power board as Fig.9.
Fig.9
3. Remove the 1 screw and disconnect 1 cable. Detach the IR board as Fig.10.
LC-26SB25E/S/RU, LC-32SB25E/S/RU, LC-42SB55E/S/RU
14
Fig.10
4. Disconnect 1 cable. Detach the Key board as Fig.11.
Fig.11
5. Remove the 4 screws and disconnect 4 cables. Detach the Speakers as Fig.12 and Fig.13.
Fig.12
Fig.13
Step 4. Remove the Metal Frame.
1.
Remove the 10 screws and disconnect 3 cables. Detach the Metal Frame as Fig.14.
Fig.14
2008-03-14
LC-26SB25E/S/RU, LC-32SB25E/S/RU, LC-42SB55E/S/RU
15
Step 5. Remove the Bezel Assy.
1. Remove the 8 screws. Detach the
Bezel Assy
as Fig.15~Fig.18.
Fig.15
Fig.16
Fig.17
Fig.18
2. The below picture is panel as Fig.19.
Fig.19
2. Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order.
Notes:
a. While re-assembling, make sure that all cables are placed and connected in their original position.
b. Pay special attention not to damage the EMC foams at the SSB shielding. Check that EMC foams are put
correctly on their places.
LC-26SB25E/S/RU, LC-32SB25E/S/RU, LC-42SB55E/S/RU
16
[2] REMOVING OF MAJOR PARTS(LC-32SB25)
1. Assy/Panel Removal
Notes: Please put your machine on soft material to avoid to scrape panel when you disassemble it.
Front view
Fig.1
Back view
Fig.2
Step 1. Remove the Base Assy.
1. Remove the base as Fig.3.
Remove the 4 screws as Fig.3 and pull out the base as Fig.4
Fig.3
Click on the first or last page to see other LC-42SB55E service manuals if exist.