Sharp LC-42DH77E (serv.man9) User Manual / Operation Manual ▷ View online
Introduction
15
16
17
17
18
19
20
21
19
20
21
22
23
24
25
4
3
2
5
6
6
7
8
9
8
9
10
11
12
13
14
1
B (Standby/On)
(Page 10)
(Page 10)
Buttons for useful operations
m (Teletext)
ATV: Display analogue teletext (Page
13).
DTV: Select MHEG-5 and teletext for
DTV (Page 13).
ATV: Display analogue teletext (Page
13).
DTV: Select MHEG-5 and teletext for
DTV (Page 13).
k (Reveal hidden Teletext)
(Page 13)
(Page 13)
[ (Subtitle)
Switch subtitle languages on/off
(Pages 13 and 28).
Switch subtitle languages on/off
(Pages 13 and 28).
3 (Freeze/Hold)
Press to freeze a moving image on
the screen.
Teletext: Stop updating teletext
pages automatically or release the
hold mode.
Press to freeze a moving image on
the screen.
Teletext: Stop updating teletext
pages automatically or release the
hold mode.
1 (Subpage)
(Page 13)
(Page 13)
v (Top/Bottom/Full)
Set the area of magnification in
teletext mode (Page 13).
Set the area of magnification in
teletext mode (Page 13).
0–9 numeric buttons
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
When the five Nordic countries
(Sweden, Norway, Finland,
Denmark, or Iceland) are selected
in the country setting from “Auto
Installation” (page 26), DTV
services are four digits. When
another country is selected, DTV
services are three digits.
(Sweden, Norway, Finland,
Denmark, or Iceland) are selected
in the country setting from “Auto
Installation” (page 26), DTV
services are four digits. When
another country is selected, DTV
services are three digits.
A (Flashback)
Press to return to the previously
selected channel or external input.
Press to return to the previously
selected channel or external input.
DTV
Press to access digital TV mode.
Press to access digital TV mode.
ATV
Press to access conventional
analogue TV mode.
Press to access conventional
analogue TV mode.
2 (Sound mode)
Select a sound multiplex mode
(Page 10).
Select a sound multiplex mode
(Page 10).
i
k/l (Volume)
Increase/decrease TV volume.
e (Mute)
TV sound on/off.
TV sound on/off.
f (WIDE MODE)
Select a wide mode (Pages 29 and
35).
Select a wide mode (Pages 29 and
35).
AV MODE
Select a video setting (Page 24).
Select a video setting (Page 24).
1
2
3
•
4
5
6
7
8
9
0
Q
END
Exit the “MENU” screen.
Exit the “MENU” screen.
R/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g.
EPG, MHEG-5, Teletext).
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g.
EPG, MHEG-5, Teletext).
b (INPUT SOURCE)
Select an input source (Page 10).
Select an input source (Page 10).
EPG
DTV: Display the EPG screen (Pages
11–12).
DTV: Display the EPG screen (Pages
11–12).
RADIO
DTV: Switch between Radio and
Data mode.
DTV: Switch between Radio and
Data mode.
When only data broadcasting (no
radio broadcasting) is transmitted
by DVB, the radio broadcasting
will be skipped.
radio broadcasting) is transmitted
by DVB, the radio broadcasting
will be skipped.
P. INFO
Press to display programme
information which is transmitted
through digital video broadcasting in
the upper left corner of the screen
(DTV only).
Press to display programme
information which is transmitted
through digital video broadcasting in
the upper left corner of the screen
(DTV only).
P
r/s
Select the TV channel.
p (Display information)
Press to display the station
information (channel number, signal,
etc.) in the upper right corner of the
screen (Page 31).
Press to display the station
information (channel number, signal,
etc.) in the upper right corner of the
screen (Page 31).
ECO (Standard/Advanced/Off)
Select “Energy Save” setting (Page
25).
Select “Energy Save” setting (Page
25).
MENU
“MENU” screen on/off.
“MENU” screen on/off.
6 (Return)
Return to the previous “MENU”
screen.
Return to the previous “MENU”
screen.
SLEEP
Press to schedule a time for the TV
to automatically standby (Page 25).
Press to schedule a time for the TV
to automatically standby (Page 25).
AQUOS LINK buttons
If external equipment such as a
AQUOS BD Player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons. See pages 19
and 21 for details.
If external equipment such as a
AQUOS BD Player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons. See pages 19
and 21 for details.
E
R
T
Y
U
•
I
O
P
A
S
D
F
G
Remote control unit
a/b/c/d (Cursor)
Select a desired item on the setting
screen.
Select a desired item on the setting
screen.
OK
Execute a command within the
“MENU” screen.
ATV/DTV: Display the programme
list when no other “MENU” screen is
running.
Execute a command within the
“MENU” screen.
ATV/DTV: Display the programme
list when no other “MENU” screen is
running.
W
3
Introduction
2
1
3
16
7 8
9
10
4
5
6
13
12
11
14
15
EXT4 (ANALOGUE RGB/AUDIO)
terminals*
HDMI1 (HDMI) terminal
HDMI2 (HDMI/AUDIO) terminals*
EXT3 (COMPONENT/AUDIO)
terminals
OUTPUT (AUDIO) terminals
DIGITAL AUDIO OUTPUT terminal
terminals*
HDMI1 (HDMI) terminal
HDMI2 (HDMI/AUDIO) terminals*
EXT3 (COMPONENT/AUDIO)
terminals
OUTPUT (AUDIO) terminals
DIGITAL AUDIO OUTPUT terminal
1
2
3
4
3
4
5
6
6
TV (Front view)
TV (Rear view)
Antenna terminal
RS-232C terminal
EXT1 (RGB) terminal
EXT2 (AV) terminal
COMMON INTERFACE slot
EXT8 terminals
HDMI3 (HDMI) terminal
USB terminal
Headphones
AC INPUT terminal
RS-232C terminal
EXT1 (RGB) terminal
EXT2 (AV) terminal
COMMON INTERFACE slot
EXT8 terminals
HDMI3 (HDMI) terminal
USB terminal
Headphones
AC INPUT terminal
7
8
9
10
11
12
13
14
15
16
8
9
10
11
12
13
14
15
16
WARNING
Excessive sound pressure from earphones and headphones can cause hearing loss.
Do not set the volume at a high level. Hearing experts advise against extended listening at
high volume levels.
Do not set the volume at a high level. Hearing experts advise against extended listening at
high volume levels.
•
•
•
The terminal layout may differ depending
on the model.
on the model.
*
4
OPC indicator
Remote control sensor
OPC sensor
B (Standby/On) indicator
MENU button
a (Power) button
i
k/l Volume
buttons
P
r/s
Programme (channel)
buttons
buttons
b (INPUT SOURCE)
button
button
The HDMI2 and EXT4 terminals
can both use the same audio input
terminal. However, the proper item
must be selected in the “PC Audio
Select” menu (Refer to page 35 for
details).
can both use the same audio input
terminal. However, the proper item
must be selected in the “PC Audio
Select” menu (Refer to page 35 for
details).
*
LC-32DH77E, LC-32DH77S:
Confirm that there are eight screws with the
stand unit.
stand unit.
Attach the supporting post for the stand unit
onto the base using the four screws with the
screw driver (supplied) as shown.
onto the base using the four screws with the
screw driver (supplied) as shown.
Inserting the stand.
Insert the stand into the openings on the
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
Insert and tighten the four screws into the
four holes on the rear of the TV.
four holes on the rear of the TV.
1
2
NOTE
To detach the stand unit, perform the steps in reverse
order.
order.
1
2
3
1
2
•
Preparation
Supplied accessories
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being
damaged.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being
damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
•
•
•
•
•
•
LC-42DH77E, LC-42DH77S/LC-46DH77E,
LC-46DH77S:
LC-46DH77S:
Confirm that there are eight screws (four short
screws and four long screws) with the stand unit.
screws and four long screws) with the stand unit.
Attach the supporting post for the stand unit
onto the base using the four long screws with
the hex key (supplied) as shown.
onto the base using the four long screws with
the hex key (supplied) as shown.
Inserting the stand.
Insert the stand into the openings on the
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
Insert and tighten the four short screws into
the four holes on the rear of the TV.
the four holes on the rear of the TV.
1
1
2
2
NOTE
To detach the stand unit, perform the steps in reverse
order.
order.
1
2
3
1
2
•
Supporting
post
post
Soft cushion
Long screw
Hex key
Hex key
Soft cushion
Short screw
5
Remote control unit
(
g1)
AC cord (
g1)
Stand unit (
g1)
Cable clamp (
g1)
Pages 3 and 6
Page 5
Page 8
Page 8
Operation manual (This publication)
•
“AAA” size zinc-carbon battery (
g2) ... Page 6
•
Product shape varies in
some countries.
Supporting
post
post
LC-32DH77E, LC-32DH77S
•
LC-42DH77E, LC-42DH77S/
LC-46DH77E, LC-46DH77S
LC-46DH77E, LC-46DH77S
•
Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries
become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size zinc-carbon
batteries.
batteries.
Place batteries with their terminals corresponding to the
(
(
e) and (f) indications in the battery compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use zinc-carbon batteries instead of alkaline ones.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use zinc-carbon batteries instead of alkaline ones.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control
unit and sensor may prevent proper operation.
unit and sensor may prevent proper operation.
1
2
2
•
3
•
•
•
•
•
•
•
•
•
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the
remote control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
remote control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
•
•
•
30°
30°
6
5 m
Remote control sensor
Click on the first or last page to see other LC-42DH77E (serv.man9) service manuals if exist.