Sharp LC-40LU700E (serv.man2) Handy Guide ▷ View online
Pin Assignments
Version 1.1
Issue 07/2010
8
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Connecting Pin Assignments
SCART
SCART (INPUT 1)
PIN# Signal
PIN# Signal
PIN# Signal
1
Audio right output
(TV Monitor out)
(TV Monitor out)
8
Audio-video control
15
Red input
2
Audio right input
9
Earth for green
16
Red/Green/Blue
control
control
3
Audio left output (TV
Monitor out)
Monitor out)
10
Not used
17
Earth for video
4
Common earth for
audio
audio
11
Green input
18
Earth for Red /
Green / Blue control
Green / Blue control
5
Earth for blue
12
Not used
19
Video output (TV
Monitor out)
Monitor out)
6
Audio left input
13
Earth for red
20
Video input
7
Blue input
14
Not used
21
Plug shield
SCART (INPUT 2)
PIN# Signal
PIN# Signal
PIN# Signal
1
Audio right output
8
Audio-video control
15
Chroma S-Video
input
input
2
Audio right input
9
Earth
16
Not used
3
Audio left output
10
AV LINK control
17
Earth for video
4
Common earth for
audio
audio
11
Not used
18
Earth
5
Earth
12
Not used
19
Video output / S-
video input
video input
6
Audio left input
13
Earth
20
Video input
7
Not used
14
Not used
21
Plug shield
Pin Assignments
Version 1.1
Issue 07/2010
9
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
HDMI
PIN# Signal
PIN# Signal
PIN# Signal
1
TMDS Data 2+
8
TMDS Data 0 Shield
15
DDC Clock
2
TMDS Data 2 Shield
9
TMDS Data 0
16
DDC Data
3
TMDS Data 2
10
TMDS Clock+
17
Ground
4
TMDS Data 1+
11
TMDS Clock Shield
18
+5V Power
5
TMDS Data 1 Shield
12
TMDS Clock
19
Hot Plug Detect
6
TMDS Data 1
13
CEC
20
SHELL
7
TMDS Data 0+
14
No Connect
S-VIDEO
RS-232C Terminal: 9-pin Mini DIN female connector
Pin No.
Signal
Name
I/O
Reference
1
Output
Not connected
2
RD
Receive Data
Input
Connected to internal circuit
3
SD
Send Data
Output
Connected to internal circuit
4
Input
Not connected
5
SG
Signal Ground
Connected to internal circuit
6
Input
Not connected
7
Output
Not connected
8
Input
Not connected
9
Output
Not connected
Pin Assignments
Version 1.1
Issue 07/2010
10
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
RS-232C Terminal: 9-pin D-sub male connector of the DIN-D-sub RS-232C adapter
Pin No.
Signal
Name
I/O
Reference
1
CD
Not connected
2
RD
Receive Data
Input
Connected to internal circuit
3
SD
Send Data
Output
Connected to internal circuit
4
ER
Not connected
5
SG
Signal Ground
Connected to internal circuit
6
Not connected
7
Not connected
8
Not connected
9
CI
Not connected
RS-232C Cable recommended connection: 9-pin D-sub female connector
Note
Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6
on the controlling device (e.g. PC).
on the controlling device (e.g. PC).
Maintenance Procedure
Version 1.1
Issue 07/2010
11
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Cleaning the LCD
Ensure you unplug the power cord before cleaning the LCD.
The cabinet as well as the operation panel is made of plastic. Avoid
using benzene or thinner, as these can damage the finish on the
cabinet.
using benzene or thinner, as these can damage the finish on the
cabinet.
Do not use volatile agents such as insecticides on the LCD. Do not
attach rubber or plastic items on the LCD for long periods of time.
The effects of some of the agents in the plastic may cause damage
to the quality or finish of the LCD.
attach rubber or plastic items on the LCD for long periods of time.
The effects of some of the agents in the plastic may cause damage
to the quality or finish of the LCD.
Wipe off dirt gently with a soft flannel cloth.
When the dirt is hard to remove, soak a cloth in a neutral detergent
diluted with water, wring the cloth well and then wipe the LCD.
Strong cleaning detergents may discolour, warp or damage the coating on the LCD.
Ensure you test on a small, inconspicuous area on the LCD before using.
diluted with water, wring the cloth well and then wipe the LCD.
Strong cleaning detergents may discolour, warp or damage the coating on the LCD.
Ensure you test on a small, inconspicuous area on the LCD before using.
Cleaning the exhaust and intake vents
Use a vacuum cleaner to clean dust from the exhaust vent and the intake vent.
Click on the first or last page to see other LC-40LU700E (serv.man2) service manuals if exist.