Sharp LC-40LE811E (serv.man2) Handy Guide ▷ View online
Handy Guide
December 2010
Version 1.0
Sharp Electronics (UK) Limited
After Sales Service
Page 5 of 8
Connectivity
The Sound bar connections should be connected as follows:
The Quattron connections should be as follows:
Handy Guide
December 2010
Version 1.0
Sharp Electronics (UK) Limited
After Sales Service
Page 6 of 8
Quattron Audio Output Configuration
The audio between the Quattron and the Sound bar is analogue audio only.
You only need to configure the analogue audio output as follows:
Press “MENU” on the remote control.
Navigate to “SETUP” and then to “OPTION”
Navigate to “TERMINAL SETTING”
Navigate to “SETUP” and then to “OPTION”
Navigate to “TERMINAL SETTING”
Navigate to “HEADPHONE / AUDIO OUT SELECT
Handy Guide
December 2010
Version 1.0
Sharp Electronics (UK) Limited
After Sales Service
Page 7 of 8
Ensure “AUDIO OUT” is set
If the output is configured correctly, the volume symbol should change as follows:
We recommend you set the volume level between 30 to 50 on the Quattron.
You can then use the volume control on the Sound bar to adjust your volume
level.
Alternatively, you can set your Sound bar volume level between 30 to.
You can then use the volume control on the Quattron to adjust your volume level.
You can then use the volume control on the Quattron to adjust your volume level.
Handy Guide
December 2010
Version 1.0
Sharp Electronics (UK) Limited
After Sales Service
Page 8 of 8
Notes
Display