DOWNLOAD Sharp LC-40LE811E (serv.man16) Service Manual ↓ Size: 2.84 MB | Pages: 64 in PDF or view online for FREE

Ensure that your TV software version is always up to 
date. From time to time SHARP will make updated TV 
base software and DVB software available.

Go to “Menu” > “Setup” > “View setting” > 
“Individual setting” > “Standby search” > 
“Download setup”.

All countries except UK, Sweden and Italy are set to “No” for 
this function.

The TV automatically determines whether a new software 
version is available when the TV is in standby mode.

Automatically searches for new software 
updates available when the TV is in 
standby mode.

Does not search for update information.

Checks if there is new software 
immediately.

You can select the method of update.

If the software is updated, the confirmation 
message “New download information has 
been detected.” appears.

If the TV receives the update service while in standby 
mode, a confirmation message displays after turning on 
the power.

Follow the screen prompts.

Starts downloading immediately. It takes 
approximately one hour to update. You 
cannot carry out other operations while 
downloading.

Cancels the download by pressing 
; on the remote control unit when 
“Discontinue” is displayed on the screen 
during the update.

•

Starts downloading automatically several 
minutes after entering standby mode.

The TV must remain in standby mode for download. Do not 
turn off the power using >a on the TV.
Updating the software may take some time.

*

•

•

•

When new software is detected, you can confirm the 
update information and download the software from 
“Message list”.

Go to “Menu” > “Setup” > “Information” > 
“Message list”.

When the TV succeeds at downloading new software, the 
message is updated in the “Message list” of the “Information” 
menu.
The software update will not be carried out if there is no new 
software available at the specified download time.

Display reports regarding failures and changes for timer 
settings.

Go to “Menu” > “Setup” > “Information” > 
“Receiver report”.

You can check the TV ID on the screen for reporting to 
customer service.

Go to “Menu” > “Setup” > “Information” > 
“Identification”.

•

•

This function allows you to update to the latest software 
using a USB device. You must update the software 
through the USB terminal.

To check the software version for the TV, use the URL shown 
on the back cover.

Go to “Menu” > “Setup” > “Information” > 
“Software update”.

Press 

; and then insert the USB device 

containing the software update file.

Be sure to insert the USB device correctly into the terminal.

•

•

The TV displays a confirmation screen while 
checking the data in the inserted USB device.

If the data is not compatible with the system, an error message 
appears on the screen. Repeat steps 2 and 3 after pressing 
;.
When an error message displays, check to see if:

The USB device is inserted firmly.
The USB memory has two or more software update files.
No data for updating the system exists in the USB 
memory.
The software update file is broken.
The software update file is not compatible with your TV’s 
software.
The current system is same as the system update data.

The TV displays the software version 
information after checking the data.

Press 

c/d to select “Yes” to update the 

system, and then press 

;.

Press 

; to automatically reset and start the 

update operation.

This operation may take a while.

A confirmation message appears on the 
screen after completing the update and 
then automatically restarts the TV. Press 
; to complete the operation.

•

•

•
•
•

•
•

•

•

The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by 
third parties.

The copyrights for the software components and various relevant documents included with this product that were developed or written 
by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also 
makes use of freely distributed software and software components whose copyrights are held by third parties. These include software 
components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other 
license agreement.

Some of the open source software licensors require the distributor to provide the source code with the executable software components. 
GPL and LGPL include similar requirements. For information on obtaining the source code for the open source software and for obtaining 
the GPL, LGPL, and other license agreement information, visit the following website:
http://www.sharp-eu.com/gpl/
We are unable to answer any questions about the source code for the open source software. The source code for the software 
components whose copyrights are held by SHARP is not distributed.

The following open source software components are included in this product:
• linux kernel • busy box • glibc • zlib • libpng • libjpeg • mtd-utils • u-Boot • device-mapper • OpenSSL •libcurl

This product includes software developed by the University of California, Berkeley and its contributors.

This software is copyright © 1991-1998, Thomas G. Lane. Portions of this software are based in part on the work of 
the Independent JPEG Group.

LICENSE ISSUES
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to 
the toolkit.
See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to 
OpenSSL please contact openssl-core@openssl.org.
OpenSSL License
Copyright (c) 1998-2008 The OpenSSL Project.  All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the 
documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software 
without prior written permission. For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written 
permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, 
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim 
Hudson (tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to.  The following conditions 
apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code.  The SSL documentation 
included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, 
Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program 
startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the 
documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes 
cryptographic software written by Eric Young (eay@cryptsoft.com)”
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an 
acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN 
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, 
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot 
simply be copied and put under another distribution licence
[including the GNU Public Licence.]

COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, <daniel@haxx.se>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, 
provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR 
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION 
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to 
promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

Portions copyright © 2004 Intel Corporation

When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not 
a malfunction, and the TV will recover when the temperature returns to normal.
Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater, as this 
may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: 

e 5 °C to e 35 °C.

•

•

Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a 
connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire 
hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a 
certain frequency range (galvanic isolator, see EN 60728-11).

For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to 
television distribution systems.

•