Sharp LC-40LE700E (serv.man2) Handy Guide ▷ View online
Procedure
Version 1.0
Issue 10/2009
5
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Procedure for removing back cabinet
NOTE - Please be careful when you remove the rear cabinet as there is possibility that
tab at the rear of the cabinet can be damaged.
tab at the rear of the cabinet can be damaged.
1. Lay the set downward on a table and remove all screws.
2. Put your left hand into a gap between the Bottom Cover and Back Cabinet at the
lower right.
3. Lift up the Back Cabinet with your left hand, and make a gap at the lower right
corner.
NOTE - Pull the Back Cabinet toward upwards slowly because there is possibility that
the tab at the rear of the cabinet will be damaged.
the tab at the rear of the cabinet will be damaged.
Procedure
Version 1.0
Issue 10/2009
6
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
4. Put your right hand into the lower right gap, lift up the Back Cabinet and release the
hooks one by one.
5. Release all hooks on the right side.
6. Change position of your left hand, and remove the Back Cabinet.
Procedure
Version 1.0
Issue 10/2009
6
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
4. Put your right hand into the lower right gap, lift up the Back Cabinet and release the
hooks one by one.
5. Release all hooks on the right side.
6. Change position of your left hand, and remove the Back Cabinet.
Procedure
Version 1.0
Issue 10/2009
6
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
4. Put your right hand into the lower right gap, lift up the Back Cabinet and release the
hooks one by one.
5. Release all hooks on the right side.
6. Change position of your left hand, and remove the Back Cabinet.
Display