Sharp LC-40LE631E (serv.man6) Service Manual / Technical Bulletin ▷ View online
LCD 2013 06 03
Date of Issue:
24
th
June 2013
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 1
Sharp Electronics (UK) Limited
Reference
– RG24062013-2
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
MODELS
LCxxLE631E
REASON
How to update the firmware.
ACTION
Update firmware as described in the instructions below.
To update eUM and Main Software versions:
1. Access the technical web site and find the latest software version.
2. On the root of a USB pen drive, create a folder called "upgrades" and a folder
2. On the root of a USB pen drive, create a folder called "upgrades" and a folder
called "dfu"
3. Extract the downloaded file, there will be 3 files.
4. Copy the 2 x .upg files to the folder "upgrades"
5. Extract the file "Electronic Manual"
6. Copy "CopyDfuContent.upg" to the folder "upgrades"
7.
4. Copy the 2 x .upg files to the folder "upgrades"
5. Extract the file "Electronic Manual"
6. Copy "CopyDfuContent.upg" to the folder "upgrades"
7.
Extract content of “EuM LE630 Series R2.zip” and put the content in the USB
folder: USB root\dfu\
folder: USB root\dfu\
8. Turn off the TV and connect USB stick.
9.
9.
Hold “OK” key on RC-transmitter and turn ON the main power switch on TV set.
The following menu will appear.
The following menu will appear.
PLEASE NOTE. The software version may have changed since this publication.
10.
Select file “CopyDfuContent_prod.upg” to install, as in the above photo, and
confirm.
confirm.
11. When the first upgrade had been done,
press “◄” on the RC-transmitter and then
select
other file “FUS_S5551_0.14.81.0_prod.upg” or upper and confirm.
12. When the first upgrade had been done,
press “◄” on the RC-transmitter and then
select
the other file “StandbySW_S5551_CFG167_89.0.5.0.upg” or lower and
confirm.
13.
Reboot the set and it’s done.
Check the upgrade and TV working:
1.
Press the Menu Key - Set up - Software settings - Current software Info
Display