Sharp LC-40LE511E Handy Guide ▷ View online
LED Flashing
Version 1.0
Issue 07/2012
Issue 07/2012
17
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Stuck in StandbyLED flashing specification at the time of the error
This problem indicates a short on Vcc voltages. Protect pin should be logic high while
normal operation. When there is a short circuit protect pin will be logic low. If you
detect logic low on protect pin, unplug the TV set and control voltage points with a
multimeter to find the shorted voltage to ground.
Also there may be a problem about SW. Try to update TV with latest SW.
Electrical Adjustments
Version 1.0
Issue 07/2012
Issue 07/2012
18
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Entering and exiting the adjustment process mode
1. Turn on the TV
2. Press “MENU” then press “4725”
From the service mode, you can enter the following sub menus and make these
adjustments (Note some area’s may be greyed out as they cannot be adjusted):
Video Settings:
Audio Settings:
Electrical Adjustments
Version 1.0
Issue 07/2012
Issue 07/2012
19
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Options:
Electrical Adjustments
Version 1.0
Issue 07/2012
Issue 07/2012
20
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Tuner Settings:
Source Settings:
Click on the first or last page to see other LC-40LE511E service manuals if exist.