DOWNLOAD Sharp LC-39LE751EK (serv.man3) Service Manual ↓ Size: 21.94 MB | Pages: 127 in PDF or view online for FREE

When the TV is powered on for the first time after 
purchase, the initial auto installation wizard appears. 
Follow the menus and make the necessary settings one 
after another.

1  Press a on the TV.

•  The initial auto installation wizard appears.

•  The auto installation can also be called in the TV menu, 

see Repeat initial installation on page 40.

•  The routine of the first installation wizard depends on 

the selected settings.

2  Setting the menu language.

Press

 

a/b/c/d 

to select the desired language.

Proceed with 

J 

button.

3  Setting Energy Efficiency.

Decide how efficiently you want to operate your TV 
set.

•Home Mode: 
The emphasis for home use is on low energy 
consumption.
•Shop Mode:
The picture settings are aligned to operate in the 
presentation room. If the ambient brightness diminishes, 
the energy consumption is not reduced.

This setting can be changed later in the MENU 
Extras

→Energy Efficiency.

Proceed with

 

J

 

button.

4  Selecting the TV location.

Press

 Ÿ/ź/Ż/Ź to select your country or area.

•  This setting screen only appears during the initial auto 

installation.

Proceed with

 

J

 

button.

5  Select broadcast settings.

Press

 Ÿ/ź to move between different tune type.

Press OK to select the desired antenna.

 

Cable analogue:   analogue broadcast via cable/

antenna.

Digital broadcast.

Cable digital broadcast.

Satellite broadcast. (Only 752/754 series)

Proceed with

 

J

 

button.

6  Select subtitles and audio languages.

Press

 

a/b/c/d and OK 

to select the desired 

languages and alternative languages for subtitles 
and audio for DVB programmes.

 

Proceed with 

J

 

button.

•To set up audio commentary for the visually impaired, please 

see Audio commentary on page 25.

If you have not selected DVB-T antenna in the antenna 
selection, continue with Setting options for DVB-C 
reception on page 10.
7  Selecting tuner settings.

 

Ɣ

 

Ɣ 

You can specify if coded stations are to be searched 
for in the search/update.

Select yes to save all scrambled stations.

•These stations can only be received in connection with a CI 

module and the appropriate CA Card.

•If a CI module with a CA Card is already inserted for the station 

search, all the stations which this module can descramble are 
also saved when no is selected.

 

Ɣ

 

Ɣ 

 Select 

Frequency search if you want to run the 

station search independently of the channel grid.

 

Ɣ 

 

In various countries, digital stations are transmitted 
with a preset channel number per station, known as 
"Logical Channel  Numbers" (LCN).

If you select yes, these default channel numbers will 
be used and the channels  will be sorted as per LCN. 

 

E Is the antenna cable connected?

 

E Is the AC cord plugged in?

USB REC

• 

The value of Frequency and Network ID should 
be set to the value specified by the cable provider.

Press 

J

 to continue.

If you have not selected a DVB-S antenna in the 
antenna selection, continue with Settings for all types 
of reception on page 13.

Select the satellite system.

Specify how you receive which satellite(s) (single 
satellite or type of satellite system). Ask your dealer in 
this regard.

The normal DVB-S settings are derived from the 
selection of the location and do not need to be changed 
in most cases.

Ɣ 

Reception of a single satellite via a connected LNC 
(LNB). See page 11 for settings.

Ɣ 

Reception of two different satellites with two LNCs 
(LNBs) which are connected to the TV set by a 22 
kHz switchbox. See page 11 for settings.

Ɣ 

 

Reception of two different satellites with two LNCs 
(LNBs) which are connected to the TV set by a 
toneburst switch. See page 11 for settings. 

Ɣ 

The TV set controls a DiSEqC multiswitch to which 
up to four LNCs (LNBs) for different satellites are 
connected. See page 11 for settings.

Ɣ 

 

Select setting if the TV set is connected to a DiSEqC 
single cable system (according to EN50494). Several 
satellite receivers can be connected to one satellite 
cable. See page 12 for settings.

Ɣ 

 

Select this setting if the TV set is connected to a 
single-cable system (without DiSEqC). Several 
satellite receivers can be connected to one satellite 
cable. As opposed to a DiSEqC one cable system 
there are restrictions in the range of certain reception 
frequencies in common single-cable community 
systems. See page 13 for settings.

Press 

J

 to continue

If you have not selected DVB-C antenna in the 
antenna selection, continue with Setting options for 
DVB-S reception below.

The normal DVB-C settings are derived from the 
selection of the location and do not need to be changed. 

Press 

Ÿ/ź/Ż/Ź to change each item to the appropriate 

settings:
 

Ɣ

 

Ɣ 

If several networks are available via DVB-C, you 
can decide which network you want to receive your 
channels from.

 

Ɣ

 

Ɣ 

You can specify if coded stations are to be searched 
for in the search/update.

Select yes to save all scrambled stations.

•These stations can only be received in connection with a CI 

module and the appropriate CA Card.

•If a CI module with a CA Card is already inserted for the station 

search, all the stations which this module can descramble are 
also saved when no is selected.

 

Ɣ

 

Ɣ 

If you select Frequency Search, a search is 
performed for all receivable stations. With Network 
Search, only the stations which the networks 
supply are searched, either for all receivable 
networks or only for the particular network specified 
under Network ID.

 

Ɣ

 

Ɣ 

 

The DVB stations are only searched for in the 
frequency range above the start frequency.

 

Ɣ

 

Ɣ 

Change this setting to register only the specified 
network ID.

 

Ɣ

 

Ɣ 

In various countries, digital stations are transmitted 
with a preset channel number per station, known as 
"Logical Channel  Numbers" (LCN).
If you select yes, these default channel numbers will 
be used and the channels  will be sorted as per LCN. 

8  Supplying power to the antenna.
 

If you use a DVB-T antenna that requires a supply voltage 
and which is not supplied via a power adapter, then select 
yes (5V) for the antenna's power supply.

Press 

J

 

button. 

How to align your DVB-T antenna is described on 
page 14.

9  Continue with Settings for all types of reception 
 

(See page 13).

Reception of a single satellite via a connected LNC 
(LNB).

1  Select satellite. 

Press 

J

 to continue.

2 Select Dual Band (low/high) or Single Band. 

Here you specify if you use a Dual Band (Universal) 
LBN or Single LBN.

Press 

J

 to continue.

3  Specify here the oscillator frequency for your LNB.

Normally you do not need to change the values 
for high and low band, unless the LNB of your 
satellite system uses a different oscillator frequency 
(important for the frequency display).
If you use the setting Single Band in step Dual/
Single Band, you only have to define the LNB 
frequency for the Low Band.

4 Press 

J

 to continue.

See  Setting options for all DVB-S reception on 
page 13

 

to continue.

1 Select 

Satellite1/Satellite2 

2  Select satellite name from list and press

Press

J

 to continue.

3  Specify here the oscillator frequency for your LNB.

Normally you do not need to change the values 
for high and low band, unless the LNB of your 
satellite system uses a different oscillator frequency 
(important for the frequency display).

4 Press 

OK to select frequency and press 

J

  to 

continue.

See  Setting options for all DVB-S reception on 
page 13

 

to continue.

Select DiSEqC multiswitch and adpat settings for this 
selection.

1  Select which DiSEqC single cable system you are 

using and press OK. 

2  Select satellite name from list and press OK. Press 

J

 to continue.

3  Specify here the oscillator frequency for your LNB 

and press OK. Press 

J

 to continue. 

Normally you do not need to change the values 
for high and low band, unless the LNB of your 
satellite system uses a different oscillator frequency 
(important for the frequency display).

4  Select and adjust settings for DiSEqC single cable 

communal installation.

Select the desired transmission channel and the 
corresponding transmission frequency.

PIN protection
If your system is designed for it, it is possible to 
protect your used transmission data from use by 
other subscribers with a PIN.

Define/change PIN
Here you can determine and change the PIN for 
PIN protection. Only possible when yes has been 
selected for PIN protection.

Continue with Setting options for all types of 
reception on page 13.

Press OK to adopt settings and press 

J

 to continue.

1 Select 

Satellite1 to Satellite4. 

2  Select satellite name from list and press OK.

Press 

J

 to continue.

3  Specify here the oscillator frequency for your LNB.

Normally you do not need to change the values 
for high and low band, unless the LNB of your 
satellite system uses a different oscillator frequency 
(important for the frequency display).

See  Setting options for all DVB-S reception on 
page 13

 

to continue.

 

Ɣ 

 

The refresh rate determines how often a DiSEQC 
command is output. A refresh is only necessary with 
cascaded system.

Ɣ 

 

The control voltage controls the switch of the 
polarisation level (horizontal/vertical) in non-DiSEqC 
capable components (e.g., control of single LNBs 
via DiSEqC multiswitch).

Ɣ 

 

The 22kHz signal controls the switching between 
high and low band in the Band setting. The Position 
setting controls the selection of the satellites in non-
DiSEqC capable components.

Ɣ 

 

The Toneburst controls the selection of the satellites 
in non-DiSEqC but Toneburst capable components 
with the Position and Option settings.