DOWNLOAD Sharp LC-39LE351K (serv.man3) Service Manual ↓ Size: 7.13 MB | Pages: 43 in PDF or view online for FREE

Model
LC-39LE351K (serv.man3)
Pages
43
Size
7.13 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / LCD / (October 2013 Revision)
File
lc-39le351k-sm3.pdf
Date

Sharp LC-39LE351K (serv.man3) User Manual / Operation Manual ▷ View online

English   - 6 -
LCD Screen
The LCD panel is a very high technology product with 
about a million thin film transistors, giving you fine 
picture details. Occasionally, a few non-active pixels 
may appear on the screen as a fixed blue, green or 
red point. Please note that this does not affect the 
performance of your product.
Warning! Do not leave your TV in standby or operating 
mode when you leave your house.
Connection to a Television Distribution 
System (Cable TV etc.) from Tuner
Device connected to the protective earthing of the 
building installation through the mains connection or 
through other apparatus with a connection to protective 
earthing-and to a television distribution system using 
coaxial cable, may in some circumstances create a 
fire hazard.
Connection to a cable distribution system has 
therefore to be provided through a device providing 
electrical isolation below a certain frequency range 
(galvanic isolator, see EN 60728-11).
Note:The HDMI connection between PC and TV 
may cause radio interference in which case it is 
recommended to use VGA(DSUB-15) connection.
The Standby Off/On button doesn´t separate this 
device completely from mains. Moreover the device 
consumes power in the standby operation. In order to 
separate the device completely from mains, the mains 
plug has to be pulled from the mains socket. Because 
of that the device should be set up in a way, that an 
unobstructed access to mains socket is guaranteed, 
so that in case of emergency the mains plug can be 
pulled immediately. To exclude the danger of fire, the 
power cord should principally be separated from the 
mains socket prior to a longer period of non-usage, 
i.e. during vacations.
• “HDMI, the HDMI logo and High-Definition 
Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing LLC.”
• The “HD TV 1080P” Logo is a trademark of EICTA.
• The DVB logo is the registered trademark of the 
Digital Video Broadcasting—DVB—project.
Electrical device not in the hands of children
Never let children use any electrical device 
unsupervised. Children cannot always recognise 
possible dangers. Batteries / accumulators can be 
life threatening when swallowed. Store batteries out 
of the reach of small children. In case of swallowing 
a battery medical aid has to be sought immediately. 
Also keep the packaging foils away from children as 
there is danger of suffocation.
English   - 7 -
Environmental Information 
This television is designed to consume less energy 
to save environment. You not only help to save the 
environment but also you can save money by reducing 
electricity bills thanks to the energy efficiency feauture 
of this TV. To reduce energy consumption, you should 
take the following steps:
You can use Power Save Mode setting, located in the 
Picture Settings menu. If you set Power Save Mode 
as 
Eco, the TV will switch to energy-saving mode 
and luminance level of TV set will be decreased to 
optimum level. Note that some picture settings will be 
unavailable to be changed when the TV is in Power 
Save Mode.
If Picture Off is selected, “
Screen will be off in 15 
seconds.” message will be displayed on the screen. 
Select PROCEED and press OK to continue. The 
screen will be off in 15 seconds. If you disable Power 
Save Mode, Picture mode will be automatically set 
to Dynamic.
When the TV is not in use, please switch off or 
disconnect the TV from the mains plug. This will also 
reduce energy consumption. 
Disconnect power when going away for longer time.
It is highly recommended to activate Power Save Mode 
setting to reduce your annual power consumption. And 
also it is recommended to disconnect the TV from the 
mains plug to save energy more when you do not use.
Please helps us to save environment by following 
these steps.
Repair Information
Please refer all servicing to qualified personnel. Only 
qualified personnel must repair the TV. Please contact 
your local dealer, where you have purchased this TV 
for further information.
Package Contents
TV
Remote Control
LED TV
Batteries: 2 X AAA
Instruction Book
Quick Guide
1 X Video & Audio 
Connection Cable
Nero media home CD
Note: You should check the accessories after 
purchasing. Make sure that each accessory is 
included.
As the manufacturer’s specification supports 
communication on cable lengths shall be smaller 
than 3m.
English   - 8 -
Viewing the TV 
LC-39LE351K                     LC-32LE351K
 
 
TV Control button & Operation
LC-39LE351K / LC-32LE351K
+
P/
C
H
+
TV
/A
V
1.  Standby button
2.  TV/AV button
3.  Programme Up/Down buttons
4.  Volume Up/Down buttons
   
, switch is used for turning the TV on or off.
English   - 9 -
Viewing remote control - TV
TV
1.  Standby / On
2.  Channel list
3.  Volume up-down
4.  Menu on/off
5.  OK / Confirm
6.  Return / Back
7.  Internet Portal
8.  My button 1 / Youtube (*)
9.  My button 2 (**)
10. Coloured buttons (Red, Green, Yellow, Blue)
11.  Mono-Stereo Dual I-II / Current language
12. Fast rewind (in media browser mode)
13. Pause (in media browser mode) / Timeshift 
recording
14. Programme recording
15. Play (in media browser mode)
16. Stop (in media browser mode)
17. Fast forward (in media browser mode)
18. Subtitle on-off / Subtitle (in media browser 
mode)
19. Image size
20. Teletext - Mix
21. Media Browser
22. Electronic programme guide
23. Exit
24. Navigation buttons
25. Quick menu On-Off
26. Info / Reveal (in TXT mode)
27. Programme up/down
28. Mute
29. Previous programme / Now (in EPG mode)
30. Numeric buttons
31. AV / Source
NOTE: The Remote Control range is approximately 7m 
/ 23ft.
Using My button 1 (*)
This button’s main function is to run Youtube link. 
However, if you want to change this function, you can 
press MY BUTTON 1  for five seconds when on a desired 
source, channel or link, until the  “MY BUTTON IS SET” 
message is displayed on the  screen. This confirms 
that the selected MY BUTTON  is now associated with 
the selected function. Note that if you perform first time 
installation, MY BUTTON 1 will return to its default 
function.
Using My Button 2 (**)
Press MY BUTTON 2  for five seconds when on a 
desired source, channel or link, until the  “MY BUTTON 
IS SET” message is displayed on the screen. This 
confirms that the selected MY BUTTON is now 
associated with the selected function.
Page of 43
Display

Click on the first or last page to see other LC-39LE351K (serv.man3) service manuals if exist.