DOWNLOAD Sharp LC-37P55E (serv.man47) Service Manual ↓ Size: 2.09 MB | Pages: 28 in PDF or view online for FREE

You can set some channel items manually.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press  a/b to select “Programme Setup”, and
then press OK.
If you have already set the PIN under “Child Lock”,
enter it here.

• See page 16 for setting PIN.

Press  a/b to select “Manual Adjust” and then
press OK.

Press c/d to select “Yes”, and then press OK.

Press a/b/c/d to select the channel you want
to edit, and then press OK.

• The selected channel information displays.

Press a/b to select the desired menu item, and
then press OK.

Press a/b/c/d to select or adjust.

MENU    

[Setup ... Programme Setup]

Fine

Colour sys.

Sound sys.

Label

Skip

Decoder

Lock

[179.25]

[AUTO]

[B/G]

[Off]

[SAT.1]

[Off]

[Off]

179.25

MHz

• When you exit Programme Setup “Manual Adjust” menu,

preset download automatically runs if you change
information on that menu.

You can adjust the frequency to your desired position.

• Adjust while checking the background picture as a

reference.

• Instead of pressing c/d to adjust the frequency in step

8 above, you can set by directly entering the frequency
number of the channel with  0–9.

• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s OK.

When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.

Repeat steps 1 to 7 in Manual Adjust.

Channels with “Skip” set to “On” are passed over when
using  Pr/Ps even if selected while watching the
image from the TV.

When connecting a decoder to the unit, you need to
assign the terminal input.

• “Off” is factory preset value.

You can block the viewing of any channel.

• See page 16 for setting PIN.
• When Lock is set to “On” for a channel, “Child lock has

been activated.” displays, and the image and sound of
the channel are blocked.

• When pressing OK while “Child lock has been activated.”

displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.

Select the optimum colour systems to receive. (AUTO,
PAL, SECAM)

Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L’)

Channel positions can be sorted freely.

Repeat steps 1 to 4 in Programme Setup.

Press c/d to select “Yes”, and then press OK.

Press a/b/c/d to select the channel you want
to move, and then press OK.

Press  a/b/c/d to move it to the desired
position, and then press OK.

Repeat steps 3 and 4 until all desired channels
are sorted.

An individual programme can be erased.

Repeat steps 1 to 4 in Programme Setup.

Press c/d to select “Yes”, and then press OK.

Press a/b/c/d to select the channel you want
to erase, and then press OK.

• A message screen pops up.

Press c/d to select “Yes”, and then press OK to
erase the selected programme. All the subsequent
programmes move up.

Repeat steps 3 and 4 until all desired channels
are erased.

Press a/b/c/d to select each character of the
new name for the channel, and then press OK.

Repeat step 2 above until the name is fully spelt
out.

• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select

“END”, then press OK.

Allow you to use a PIN to protect certain settings from
being accidentally changed.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Child Lock”, and then press
OK.

New PIN

–

–

–

Reconfirm

–

–

–

–

–

Change PIN

Reset

Enter the 4-digit number as a PIN using 0 – 9.

Enter the same 4-digit number as in step 4 to
confirm.

• “The system PIN has been changed successfully”

displays.

• To view a locked channel (Lock setting in Programme

Setup “Manual Adjust” is set to “On”), you must enter a
PIN. (See page 15.) When you select a locked channel, a
PIN prompt message pops up. Press OK to display the
PIN input window.

Allow you to reset your PIN to the factory preset “1234”.

Repeat steps 1 to 3 in Changing the PIN.

Enter the PIN.

Press a/b to select “Reset”, and then press OK.

Press c/d to select “Yes”, and then press OK.

• As a precautionary measure, make a note of your PIN

• See page 21 for resetting the current PIN to the factory

You can assign each input source a label you like.

Press b to select the desired input source.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Input Label”, and then press
OK.

Press a/b/c/d to select each character of the
new name for the input source, and then press
OK.

Repeat step 5 above until the name is fully spelt
out, and then press OK.

• The name can be 6 characters or less.
• If a label name is less than 6 characters, select

“END”, then press OK.

• You cannot change the label if the input source is TV.

Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed to optimise the
image.

Clock: Adjusts when the image flickers with vertical

stripes.

Phase: Adjusts when characters have low contrast or

when the image flickers.

• If you need to adjust the image position, adjust the position

using your PC.

For adjusting a picture’s horizontal and vertical
position.

• Adjustments are stored separately according to input

• Depending on the input signal type a position setting may

not be available.

H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.

You can set the orientation of the picture.

[Normal]

[Mirror]

[Upside

Down]

[Rotate]

When listening to music from a music programme, you
can set the TV off and enjoy audio only.

MENU    

[Option]

Option

Audio Only

DNR

Input Select

Quick Shoot

Colour System

[On]

[Off]

[CVBS]

[AUTO]

Demo

You can select a language from the Setup menu. Select
from among 13 languages. (Dutch, English, Finnish,
French, German, Greek, Italian, Polish, Portuguese,
Russian, Spanish, Swedish, Turkish)

• “HDMI Setup” is displayed only when “EXT5” is selected

from the INPUT SOURCE menu.

Off: Both screen images and audio are output.
On: Audio is output without screen image.

WSS allows a television to switch automatically among
the different screen formats.

• Use WIDE MODE if an image does not switch to the correct

screen format. When the broadcast signal contains no
WSS information, the function will not work even if enabled.
(See page 19.)

The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.

Normal: Normal range keeping 4:3 or 16:9 aspect ratio
Panorama: Wide image without side bars

HDMI (High-Definition Multimedia Interface) terminal
selection.

To watch an HDMI equipment image, select
“EXT5” from “INPUT SOURCE” menu using b
on the remote control unit or TV.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press  a/b to select  “HDMI Setup”, and then
press OK.

• “HDMI Setup” is displayed only when “EXT5” is

selected from the INPUT SOURCE menu.

MENU    

[Option ... HDMI Setup]

Option

Audio Only

DNR

HDMI Setup

Quick Shoot

[On]

[Off]

Demo

Press a/b to select the desired item, and then
press OK.

Press a/b/c/d to select the desired setting, and
then press OK.

Produce a clearer image. (Off, High, Low)

RGB/YCbCr 4:4:4/
YCbCr 4:2:2

ITU601/ITU709

Normal/
Enhanced

Disable/Enable

Digital/Analogue

Select the video signal
type from the HDMI
terminal.

Select the internal colour
space conversion method
when an RGB signal is
input.

Select the signal amplitude
range. Usually, select
“Normal”.

Set whether or not to use
WIDE MODE based on
signal recognition,
including an HDMI signal.

Select “Digital” for audio
signal via the HDMI
terminal. Select “Analogue”
for audio signal via the
AUDIO jack.

• Refer to your external equipment operation manual for the signal

type.

• Items with * may be greyed out (with 4) depending on the type

of signal input from the external equipment.

You can change the colour system to one that is
compatible with the image on the screen. (AUTO, PAL,
SECAM, NTSC3.58, NTSC4.43, PAL-60)

• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is

automatically set. If an image does not display clearly, select
another colour system (e.g. PAL, SECAM).

• “NTSC3.58”, “NTSC4.43” and “PAL-60” cannot be selected in

TV tuner mode.

Improve LCD response when viewing fast-moving
images. The effect is greater at low room temperatures
(at or below 15˚C).

• Quick Shoot may cause image noise. If this occurs, set the

function to “Off”.

For setting the signal type of external equipment.

• If no (colour) image displays, try to change the other signal

• Check the operation manual of the external equipment for the

signal type.

• TV and EXT5 are not displayed in Input Select.
• If both CVBS and RGB signals are input to EXT 1 or EXT 2 using

a SCART cable, the TV may output an RGB signal even though
you have designated CVBS for the respective terminal. This
happens due to the setting of your external equipment.

When activated, this function demonstrates some of
the functions of the TV on the screen.

Demo: Sets whether to activate the function.
Input Source: Selects whether to demonstrate all

functions of connected terminals or skip some.

Teletext: Sets whether to demonstrate Teletext.
Freeze: Sets whether to demonstrate Freeze.
Menu: Sets whether to demonstrate Menu.
Interval: Sets the interval between the presentations.

• Some demonstrations may not be presented depending on the

settings made above.

• After switching on this demo function, it takes 70 seconds

approximately, before the TV-set starts the demo show. The
selected functions are shown in a self-repeating sequence.
Return to normal television-mode is possible only by deactivating
the demo-function.

Y/C, CVBS, RGB

Y/C, CVBS, RGB

PC (RGB), COMPONENT (Y, P

B

, P

R

)

AUTO