DOWNLOAD Sharp LC-37HV4E (serv.man29) Service Manual ↓ Size: 351.42 KB | Pages: 8 in PDF or view online for FREE

Model
LC-37HV4E (serv.man29)
Pages
8
Size
351.42 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / LCD / Watching TV
File
lc-37hv4e-sm29.pdf
Date

Sharp LC-37HV4E (serv.man29) User Manual / Operation Manual ▷ View online

14
Watching TV
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
(commercially available)
Simple operations for watching a TV programme
Basic connection
Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for coaxial cable.
Antenna cables–commercially available
If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325
plug (IEC 169-2), plug it into the ANTENNA INPUT terminal at the rear of the
AVC System.
Connecting to the power outlet
Display (rear view)
AVC System (rear view)
NOTE
• Always turn off the main power of Display and AVC System when connecting the AC cords.
• Disconnect the AC cords from the AC outlet, Display and AVC System if the System will not be used for a long period of
time.
Product shape varies
in some countries.
Product shape varies
in some countries.
15
Watching TV
Display
AVC System
Off
Flashing red
Red
Green
Display status indicator
Power off
AVC System does not turn on or its AC cord is disconnected.
The System is in standby mode.
The System is on.
Turning on the power
STANDBY/ON indicator
POWER
MAIN POWER
STANDBY/ON indicator
STANDBY/ON button
1
2
3
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display flashes red.
Press POWER on the AVC System.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up
green and the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press
B on the remote control unit or STANDBY/ON button
on the Display to turn the System on.
NOTE
• The initial auto installation starts when the System powers on for the first
time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 23 to try auto installation from the Setup
menu.
Turning off the power
Press B on the remote control unit or STANDBY/
ON button on the Display.
• The System enters standby mode and the image on the
screen disappears.
• Both STANDBY/ON indicators change from green to red.
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns
off and the one on the Display flashes red.
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display gradually
turns off.
When turning the AVC System on first
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights
up red.
Press MAIN POWER on the Display.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up
green and the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press
B on the remote control unit or STANDBY/ON button
on the Display to turn the System on.
1
2
NOTE
• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet.
• Weak electric power is still consumed even when both MAIN POWER and
POWER are turned off.
• When the STANDBY/ON indicator lights up red, it takes about 10 to 15
seconds for the indicator to turn off if POWER on the AVC System is turned
“Off” or the AC cord is unplugged from the AC outlet.
1
2
AVC System status indicator
Power off
Only the AVC System is in standby mode or the System is in standby mode.
The System is on.
Off
Red
Green
16
Initial auto installation
When the System powers on for the first time after
purchase, the initial auto installation is invoked. You
can automatically set language, country and channels
in successive operations.
NOTE
• The initial auto installation functions only once. If the initial
auto installation is not completed, you can perform it again.
See page 23 to try auto installation from the setup menu.
• The initial auto installation stops by pressing RETURN.
Watching TV
2
Setting the country or area
1 Press a/b/c/d to select your country
or area listed on the screen.
2 Press ENTER to enter the setting.
• The programme auto search starts at the same
time.
TV MENU
Setup
Auto Installation - Country
Austria
Belgium
Denmark
Finland
Setting the on-screen display language
1 Press  a/b/c/d to select the desired
language listed on the screen.
2 Press ENTER to enter the setting.
1
TV MENU
Setup
Auto Installation - Language
English
Deutsch
Français
After this setting, auto search starts with the following
order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
You do not need to do anything during the auto search.
(Go to the next page.)
NOTE
• The illustrations and on-screen displays in this manual
are for explanation purposes and may vary slightly from
the actual operations.
17
Watching TV
Automatic channel labelling
After finding TV channels, the System starts naming
each TV channel found.
NOTE
• The System can only name channels where the channel
labelling information is provided. If channel information is
not provided, the System displays “-----”.
Automatic channel searching
Channel auto search finds all channels viewable in
your area.
NOTE
• If no channel is found, “No programme found. Is antenna
connected properly?” displays. And the auto installation
finishes.
Preset download
When auto sorting finishes, the System automatically
downloads and stores each sorted channel.
• When a VCR is connected via INPUT 2, the System sends
all preset channel information to the VCR. (See pages 42
and 43.)
• “Auto Installation completed.” displays. After that, the
screen changes to the auto installation menu.
Automatic channel sorting
When channel auto labelling finishes, the System starts
sorting the labelled channels.
Watching TV
The setup menu disappears and you can watch the
programme on channel 1.
TV MENU
Setup
Auto Installation Programme Setup “Auto”
01 55.25
02 85.25
03 102.25
TV MENU
Setup
Auto Installation Programme Setup “Auto”
01 SAT.1
02 PR07
03 KABEL
TV MENU
Setup
Auto Installation Programme Setup “Auto”
01 SAT.1
02 PR07
03 KABEL
1
SAT.1
B/G
PAL
Page of 8
Display

Sharp LC-37HV4E (serv.man29) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp LC-37HV4E (serv.man29) Service Manual ↓ Size: 351.42 KB | Pages: 8 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp LC-37HV4E (serv.man29) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp LC-37HV4E (serv.man29) LCD. Information contained in Sharp LC-37HV4E (serv.man29) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.