DOWNLOAD Sharp LC-37GA3E (serv.man27) Service Manual ↓ Size: 1.7 MB | Pages: 29 in PDF or view online for FREE

Model
LC-37GA3E (serv.man27)
Pages
29
Size
1.7 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / LCD / Part 2 Using external equipment, Useful adjustment settings, Useful features, Appendix, Dimensional drawings
File
lc-37ga3e-sm27.pdf
Date

Sharp LC-37GA3E (serv.man27) User Manual / Operation Manual ▷ View online

35
Using external equipment
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• When connecting to a PC, the correct input signal type is automatically detected. (See page 43.) If the PC image does
not come in clearly, you may need to set the Auto Sync. adjustment in the “Setup” menu. (See page 37.)
Connecting a PC
Use the INPUT5 terminals to connect a PC.
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 52 for a list of PC signals compatible with the TV.
ø 3.5 mm stereo minijack cable
(commercially available)
PC
ø 3.5 mm stereo minijack cable
(commercially available)
RGB/DVI conversion cable (commercially available)
DVI cable
(commercially available)
To watch the image from this
input terminal, you may
select input source (see
page 38) and input signal
type (see page 43).
PC
LC-37GA3E(E)-g
04.6.25, 8:00 AM
35
36
Rear view
Using external equipment
Connecting external speakers
Make sure to connect the speaker terminal and
cable polarity (L, +) properly.
• The speaker terminals have plus (L) and minus (+)
polarity.
• Plus is red and minus is black.
• The cables are also divided into plus and minus.
• When connecting the left/right speakers, be sure to
connect the plus/minus terminals with the correct cables.
NOTE
• Unplug the AC cord from the AC outlet before installing
the speakers.
CAUTION
• Make sure external speakers have 4 ohm and 10 watt
specifications.
• Connect the plus/minus terminals with the correct cables.
Incorrect connection may cause a short.
How to connect the
speaker cable
Pull up the
lid.
Insert the
edge of the
cable.
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
Put the lid
back
down.
Make sure to disconnect the connected speaker
cables in advance when connecting external
speakers.
External Audio Bypass
External Audio Bypass automatically optimises the
audio quality to suit internal (supplied) speaker.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
Press c/d to select “Yes” or “No”, and then
press OK.
5
Press a/b to select “Speaker Setup”, and
then press OK.
3
Press  a/b to select “External Audio
Bypass”, and then press OK.
4
NOTE
• External Audio Bypass is greyed out when Dolby Virtual
is set to “On”.
• When Dolby Virtual is on, External Audio Bypass
automatically sets to “Yes”.
Description
Sets the optimum audio for the internal
(supplied) speaker.
When you are using your own speakers,
output the original sound.
Selected item
No
Yes
LC-37GA3E(E)-g
04.6.25, 8:00 AM
36
37
Useful adjustment settings
1
2
Image position (for TV/AV input mode)
For adjusting a picture’s horizontal and vertical
position.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Description
Centres the image by moving it to the left or
right.
Centres the image by moving it up or down.
Selected item
H-Pos.
V-Pos.
4
5
3
Press  a/b to select “Position”, and then
press OK.
Press a/b to select “H-Pos.” or “V-Pos.”.
Reset
H-Pos.
[0]
–10
+10
V-Pos.
[0]
–20
+20
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press OK.
• Adjustments are stored separately according to input
source.
• This function is available for AV input mode and TV tuner
mode.
4
Press  c/d to select “On”, and then press
OK.
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “Audio Only”, and then
press OK.
1
2
3
Audio Only
When listening to music from a music programme, you
can set the Display off and enjoy audio only.
Description
Audio is output without screen image.
Both screen images and audio are output.
Selected item
On
Off
1
2
Auto Sync. adjustment (PC input
mode only)
For automatically adjusting the PC image.
Press MENU and the MENU screen displays.
3
Press a/b to select “Auto Sync.”, and then
press OK.
Press c/d to select “Yes”, and then press
OK.
• Auto Sync. starts and “Adjusting the image”
displays.
NOTE
• When Auto Sync. is successful, “Auto Sync completed
successfully” displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if “Auto Sync completed
successfully” displays.
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (ex. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
30%
4
Press c/d to select “Setup”.
LC-37GA3E(E)-h
04.6.25, 8:02 AM
37
38
Useful adjustment settings
Fine Sync. adjustment (PC input
mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
2
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
4
3
Press a/b to select “Fine Sync.”, and then
press OK.
Reset
H-Pos.
[90]
+
V-Pos.
Clock
Phase
[39]
[90]
[20]
+
+
+
5
Press c/d to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press OK.
Description
Centres the image by moving it to the left or
right.
Centres the image by moving it to the up or
down.
Adjusts when the image flickers with
vertical stripes.
Adjusts when characters have low contrast
or when the image flickers.
Selected item
H-Pos.
V-Pos.
Clock
Phase
Press a/b to select the specific
adjustment item.
Input Select
Selecting input source
Can use for selecting the input source.
Press MENU and the MENU screen displays.
1
2
4
3
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press OK.
Press a/b/c/d to select a signal type you
want to set, and then press OK.
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
Press  b on the remote control unit or
INPUT on the Display.
Press  b on the remote control unit or
INPUT on the Display to select the input
source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
1
2
Selecting input signal type
For setting the signal type of external equipment.
Signal type
CVBS, RGB
Y/C, CVBS
COMPONENT, Y/C, CVBS, RGB
AUTO, S-Video, Video
PC digital, PC analogue, AV
digital, AV analogue
Input type
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
LC-37GA3E(E)-h
04.6.25, 8:02 AM
38
Page of 29
Display

Click on the first or last page to see other LC-37GA3E (serv.man27) service manuals if exist.