Sharp LC-37D65 (serv.man10) User Manual / Operation Manual ▷ View online
Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size alkaline batteries. When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size alkaline batteries.
Insert two supplied “AAA” size alkaline batteries.
Place batteries with their terminals corresponding to the
(
(
e) and (f) indications in the battery compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use alkaline batteries instead of zinc-carbon ones.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use alkaline batteries instead of zinc-carbon ones.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control
unit and sensor may prevent proper operation.
unit and sensor may prevent proper operation.
1
2
2
•
3
•
•
•
•
•
•
•
•
•
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the
remote control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
remote control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
•
•
•
30°
30°
6
5 m
Remote control sensor
LC-3237D65E_GB.indd 6
LC-3237D65E_GB.indd 6
2008/07/08 18:52:06
2008/07/08 18:52:06
Quick guide
1
2
3
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
depending on your TV installation and connection.
Connect an antenna cable to
the antenna terminal (Page 8).
If necessary, insert a CA card
into the CI slot to watch
scrambled broadcasts (Pages
8 and 19).
Connect the AC cord to the TV
(Page 8).
Product shape varies in some countries.
n
o
p
Turn on the power using a on
the TV (Page 10).
Run the initial auto installation
(Page 9).
Language setting
English
Italiano
Svenska
Home/Store setting
STORE
HOME
Country setting
Austria A B/G
Finland FIN B/G
Greece GR B/G
Channel search setting
Analogue Search
Digital Search
n
o
✔
✔
✔
✔
Congratulations!
Now you can watch TV.
If necessary, adjust the
Now you can watch TV.
If necessary, adjust the
antenna to attain maximum
signal reception (Page 9).
n
o
o
7
Preparation
Power on and
run the auto
installation
Watch TV
Connect
external devices
Connect external
devices such as a
DVD player/recorder
as instructed (Pages
15–17).
Connect external
audio devices such as
speakers/amplifier as
instructed (Pages 15
and 18).
n
o
Start searching
channels
LC-3237D65E_GB.indd 7
LC-3237D65E_GB.indd 7
2008/07/08 18:52:08
2008/07/08 18:52:08
Quick guide
Supplying power to the antenna
You must supply power to the antenna in order to receive
digitally/terrestrially broadcast stations after connecting the
antenna cable to the antenna terminal on the rear of the TV.
digitally/terrestrially broadcast stations after connecting the
antenna cable to the antenna terminal on the rear of the TV.
Press MENU and the “MENU” screen displays.
Press
Press
c/d to select “Setup”.
Press
a/b to select “Antenna Setup-DIGITAL”, and then press
OK
.
Press
a/b to select “Supply Voltage”, and then press OK.
Press
c/d to select “On”, and then press OK.
1
2
3
2
3
4
5
5
Mounting the TV on a wall
This TV should be mounted on a wall only with the wall mount bracket available from SHARP (Page
42). The use of other wall mount brackets may result in an unstable installation and may cause
serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility
for improper mounting or mounting that results in accident or injury.
You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
To use this TV mounted on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
When you mount the TV on a wall, you should attach the supporting post.
42). The use of other wall mount brackets may result in an unstable installation and may cause
serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility
for improper mounting or mounting that results in accident or injury.
You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
To use this TV mounted on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
When you mount the TV on a wall, you should attach the supporting post.
When using wall mount bracket AN-37AG5
You can check the centre of the TV screen using the mark engraved on the wall mount bracket when mounting
the TV on the wall.
the TV on the wall.
LC-32D65E, LC-32DH65E, LC-32DH65S: The centre of the TV screen is 4 mm below the mark “A” on the wall bracket.
LC-37D65E, LC-37DH65E, LC-37DH65S: The centre of the TV screen is 6 mm above the mark “A” on the wall bracket.
LC-37D65E, LC-37DH65E, LC-37DH65S: The centre of the TV screen is 6 mm above the mark “A” on the wall bracket.
•
•
•
•
•
•
Before turning on the power
Bundling the cables
8
Carefully insert the CI
Module in the CI slot
with the contact side
forward.
The logo on the CI
Module must be
facing outward from
the rear of the TV.
Module in the CI slot
with the contact side
forward.
The logo on the CI
Module must be
facing outward from
the rear of the TV.
1
2
Cable clamp
Bundle the cables with
the clamp.
AC cord
Place the TV close to the
AC outlet, and keep the
power plug within reach.
AC outlet, and keep the
power plug within reach.
Standard
DIN45325 plug
(IEC 169-2) 75
DIN45325 plug
(IEC 169-2) 75
q
coaxial cable
Product shape varies in some countries.
LC-3237D65E_GB.indd 8
LC-3237D65E_GB.indd 8
2008/07/08 18:52:12
2008/07/08 18:52:12
Quick guide
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Press a on the TV.
The initial auto installation wizard appears.
Setting the OSD language.
English
Italiano
Svenska
Press
a/b/c/d to select the desired language,
and then press OK.
Selecting the location of the TV.
Selecting the location of the TV.
STORE
HOME
Press
c/d to select where you will use this TV,
and then press OK.
HOME: “STANDARD” will be the default value for the “AV
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for the
“AV MODE” setting. If the “AV MODE” is changed, the TV will
automatically switch back to “DYNAMIC (Fixed)” when there
is no signal input from the TV or remote control unit for 30
minutes.
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for the
“AV MODE” setting. If the “AV MODE” is changed, the TV will
automatically switch back to “DYNAMIC (Fixed)” when there
is no signal input from the TV or remote control unit for 30
minutes.
Setting the country.
Austria A B/G
Finland FIN B/G
Greece GR B/G
Press
a/b/c/d to select your country or area,
and then press OK.
This setting screen only appears during the first installation.
Starting channel search.
Analogue Search
Digital Search
Press
c/d to select “Digital Search” or “Analogue
Search”, and then press OK.
If you want to search for more broadcasts, execute
“Additional Search” from the “Programme Setup” menu
(Pages 27 and 28).
To watch both analogue broadcasts and digital broadcasts,
you should perform the channel search setting for each
format.
“Additional Search” from the “Programme Setup” menu
(Pages 27 and 28).
To watch both analogue broadcasts and digital broadcasts,
you should perform the channel search setting for each
format.
EXAMPLE
If you execute “Digital Search” in the initial auto installation
wizard, you should perform “Analogue Search” from “Auto
Installation” under the “Setup” menu (Pages 27 and 28).
wizard, you should perform “Analogue Search” from “Auto
Installation” under the “Setup” menu (Pages 27 and 28).
1
•
2
3
•
•
4
•
5
•
•
•
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
To abort the initial auto installation in progress, press
6.
NOTE
If you turn off the power on the TV after performing step 5,
the initial auto installation wizard does not appear. The auto
installation function allows you to execute the installation
again from the “Setup” menu (Page 27).
The initial auto installation wizard will go off if you leave
the TV unattended for 30 minutes before searching for
channels in step 6.
the initial auto installation wizard does not appear. The auto
installation function allows you to execute the installation
again from the “Setup” menu (Page 27).
The initial auto installation wizard will go off if you leave
the TV unattended for 30 minutes before searching for
channels in step 6.
Checking signal strength and
channel strength
channel strength
If you install a DVB-T antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking
the antenna setup screen.
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking
the antenna setup screen.
Press MENU and the “MENU” screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna Setup-DIGITAL”,
Press c/d to select “Setup”.
Press a/b to select “Antenna Setup-DIGITAL”,
and then press OK.
Checking signal strength
Press a/b to select “Signal Strength”.
Signal Strength
Supply Voltage
Channel Strength
Signal Strength
Quality
Current Max
0
CH No.
21
0
Current Max
0 0
Checking channel strength
Press a/b to select “Channel Strength”, and
then press OK.
You can input a specified frequency band using the 0–9
numeric buttons.
numeric buttons.
Signal Strength
Supply Voltage
Channel Strength
Signal Strength
Quality
Current
Max
0
CH No.
21
0
Current
Max
0
0
4 7 4
.
0
MHz
Position and align the antenna so that the
maximum possible values for “Signal Strength”
and “Quality” are obtained.
NOTE
The values of “Signal Strength” and “Quality” indicate when
to check the appropriate alignment of the antenna.
to check the appropriate alignment of the antenna.
6
•
•
•
1
2
3
2
3
E
E
•
4
•
9
Confirm the following before turning
on the power
on the power
Is the antenna cable connected?
Is the AC cord plugged in?
Is the AC cord plugged in?
E
E
E
LC-3237D65E_GB.indd 9
LC-3237D65E_GB.indd 9
2008/07/08 18:52:16
2008/07/08 18:52:16
Click on the first or last page to see other LC-37D65 (serv.man10) service manuals if exist.