DOWNLOAD Sharp LC-32SH130K (serv.man12) Service Manual ↓ Size: 2.86 MB | Pages: 9 in PDF or view online for FREE

Problem: LED or IR not working

Check LED card supply on MB60 chassis.

Problem: Keypad or Touchpad is not working

Check keypad supply and KEYBOARD pin on MB60.

Problem: USB is not working or no USB Detection.

Check USB Supply, It should be nearly 5V. Also USB Enable should be logic high.

Problem: No audio at main TV speaker outputs.

Check supply voltages of VDD_AUDIO, 5V_VCC and 3V3_VCC with a voltage-meter.

There may be a problem in headphone connector or headphone detect circuit (when headphone is 
connected, speakers are automatically muted). Measure voltage at HP_DETECT pin, it should be 3.3v. 

Problem: No audio at headphone output.

Check HP detect pin, when headphone is. Check 5V_VCC and 3V3_VCC with a voltage-meter.

Problem: Device cannot boot, TV hangs in standby mode.

There may be a problem about power supply. Check 12V_VCC, 5V_VCC and 3V3_VCC with a voltage-
meter. Also there may be a problem about SW. Try to update TV with latest SW. Additionally it is good to 
check SW printouts via hyper-terminal (or Teraterm). These printouts may give a clue about the problem.