DOWNLOAD Sharp LC-32SA1E (serv.man4) Service Manual ↓ Size: 1.59 MB | Pages: 28 in PDF or view online for FREE

Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!

Used electrical and electronic equipment must be treated separately and in accordance with legislation that
requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used
electrical and electronic equipment to designated collection facilities free of charge*.  In some countries* your local
retailer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.

If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately
beforehand according to local requirements.

By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative effects on the environment and human health which
could otherwise arise due to inappropriate waste handling.

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you
don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or
www.sens.ch.

If the product is used for business purposes and you want to discard it:

Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged
for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your
local collection facilities.

For Spain: Please contact the established collection system or your local authority for take-back of your used
products.

If you wish to discard of this product, please contact your local authorities and ask for the correct method of
disposal.

Attention: Your product
is marked with this
symbol. It means that
used electrical and
electronic products
should not be mixed
with general household
waste. There is a
separate collection
system for these
products.

LC-32SA1E_GB_c

06.7.25, 11:36 AM

24

(672.2) / [806.0]
(672,2) / [806,0]

(136.5) / [137.4]
(136,5) / [137,4]

(350.5) / [389.0]

(350,5) / [389,0]

(577.4) / [700.0]
(577,4) / [700,0]

(501.0) / [577.0]

(501,0) / [577,0]

(560.0) / [636.0]

(560,0) / [636,0]

(325.3) / [394.6]

(325,3) / [394,6]

200.0 / 200,0

115.0 / 115,0

100.0 / 100,0

100.0 / 100,0

522.2
522,2

59.0

59,0

200.0 / 200,0

75.5
75,5

194.3
194,3

(   )  : LC-26SA1E

LC-26SV1E

[   ]  : LC-32SA1E

LC-32SV1E

: LC-26SA1E

LC-26SV1E
LC-32SA1E
LC-32SV1E

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked 

 or 

ASA

 and of the same rating

as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the
mains plug and fit an appropriate type.

DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of
in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:

IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:

As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
• The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO

Printed in Hungary
Gedruckt in Ungarn
Imprimé en Hongrie
Stampato in Ungheria
Gedrukt in Hongarije
Impreso en Hungría

TINS-C612WJZZ

ENGLISH

FRANÇAIS

DEUTSCH

ITALIANO

NEDERLANDS

ESPAÑOL

06P08-HU-NG

Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico

OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO

Printed in Hungary
Gedruckt in Ungarn
Imprimé en Hongrie
Stampato in Ungheria
Gedrukt in Hongarije
Impreso en Hungría

TINS-C612WJZZ

ENGLISH

FRANÇAIS

DEUTSCH

ITALIANO

NEDERLANDS

ESPAÑOL

06P08-HU-NG

Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico