DOWNLOAD Sharp LC-32SA1E (serv.man4) Service Manual ↓ Size: 1.59 MB | Pages: 28 in PDF or view online for FREE

• The cables marked with * are commercially available

items.

• The PC input terminals are DDC1/2B-compatible.
• Refer to page 23 for a list of PC signals compatible with

the TV.

• Macintosh adaptor may be required for use for some

Macintosh computers.

• When connecting to a PC, the correct input signal type is

automatically detected.

This TV incorporates three typical AV Link functions
for smooth connections between the TV and other
audiovisual equipment.

While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).

When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.

Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2
terminal.

• Refer to operation manuals of each external equipment

for the details.

• Only works when the audiovisual equipment is connected

to the EXT 2 terminal on the TV with AV Link via a fully
wired SCART.

• The use of the AV Link function is only possible if the TV-

set has enforced a complete auto-installation with the
connected audiovisual equipment (page 7, Initial auto
installation).
The availability of the AV Link function depends on the
audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.

Use the EXT 4 terminals to connect a PC.

ø 3.5 mm stereo minijack cable*

RGB cable*

RGB/DVI conversion cable*

ø 3.5 mm stereo minijack cable*

You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.

• In cases when the decoder needs to receive signal from

the TV, make sure to set “Decoder” to “EXT1” in the
Programme Setup “Manual Adjust” menu. (See page 15.)

• Do not connect the decoder to the EXT 2 terminal.

SCART cable*

LC-32SA1E_GB_b

06.7.25, 11:35 AM

9

MENU    

[Option ... Colour System]

Option

Audio Only

DNR

Input Select

Colour System

[Off]

[CVBS]

[AUTO]

Demo

1

Item displayed in yellow

• This indicates the item currently selected.

2

Item in brackets

• This indicates the current setting for the item.

3

Item displayed in white

• This indicates an item can be selected.

4

Item with 4 displayed in grey

• This indicates the item cannot be selected for various

reasons.

• Menu options differ in the selected input modes, but the

operating procedures are the same.

• The screens in the operation manual are for explanation

purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.

Use the following buttons on the remote control unit to
operate the menu.

Press to open or close the menu screen.

a/b/c/d:

Press to select a desired item on the screen
or adjust a selected item.

Press to go to the next step or complete the
setting.

Press to return to the previous step.

Press to exit the menu item.

1

2
3

4

LC-32SA1E_GB_b

06.7.25, 11:35 AM

10

MENU    

[Picture]

Picture

Audio

Contrast

OPC

AV Mode

[STANDARD]

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[+30]

[0]

[0]

[0]

[0]

0

–30

–30

–30

–10

+40

+30

+30

+30

+10

Backlight

[+6]

–8

+8

1

Press MENU and the MENU screen displays.

2

Press c/d to select the desired menu.

3

Press  a/b to select the desired menu item
(Example: Backlight, Contrast, etc).

4

Press  c/d to adjust the item to your desired
position.

• Select “Reset” to reset all adjustment items to the

factory preset values.

Off

On

On(Display)

MENU    

[Picture

 ... Backlight

]

Picture

Audio

Contrast

OPC

AV Mode

[STANDARD]

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[+30]

[0]

[0]

[0]

[0]

0

–30

–30

–30

–10

+40

+30

+30

+30

+10

Backlight

[+6]

–8

+8

1

Press MENU and the MENU screen displays.

2

Press c/d to select the desired menu.

3

Press a/b to select the desired menu item, and
then press OK (Example: AV Mode, OPC, etc).

• Select “Reset” to reset all adjustment items to the

factory preset values.

4

Press a/b/c/d to select the desired item, and
then press OK.

1

Press MENU and the MENU screen displays.

2

Press c/d to select the desired menu.

3

Press a/b to select the desired menu item, and
then press OK (Example: Advanced, Demo, etc).

4

Press a/b to select the desired menu item, and
then press OK (Example: Colour Temp., Black,
etc).

• Select “Reset” to reset all adjustment items to the

factory preset values.

Colour Temp.

Black

3D - Y/C

Monochrome

Film Mode

I/P Setting

High

Mid-High

Middle

Mid-Low

Low

5

Press a/b/c/d to select or adjust the desired
item, and then press OK.

LC-32SA1E_GB_b

06.7.25, 11:35 AM

11

MENU    

[Picture]

Picture

Audio

Contrast

OPC

AV Mode

[STANDARD]

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[+30]

[0]

[0]

[0]

[0]

0

–30

–30

–30

–10

+40

+30

+30

+30

+10

Backlight

[+6]

–8

+8

Off: The brightness is fixed at the value set in Backlight.
On: Automatically adjusts
On(Display): Displays the OPC effect on the screen while

adjusting the brightness of the screen.

Automatically adjust the brightness of the screen.

• When set to “On”, the TV senses the surrounding light

and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.

• You can adjust the factory preset parameters given in

“STANDARD”, “SOFT”, “ECO” and “DYNAMIC”. The
parameters chosen affect each of the input sources.

• The items marked with * are only available for TV/AV input

mode.

STANDARD: For a highly defined image in a normally

bright room

SOFT*: Creates a softer image.
ECO*: Reduces power consumption.
USER: Allows the user to customise settings as desired.

You can set the mode for each input source.

DYNAMIC*: For a clear-cut image emphasising high

contrast for sports viewing

AV Mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.

This TV provides various advanced functions for
optimising the picture quality.

Colour Temp.

Black

3D - Y/C

Monochrome

Film Mode

I/P Setting

High

Mid-High

Middle

Mid-Low

Low

Adjust the picture to your preference with the following
picture settings.

c button

d button

The screen dims

The screen
brightens

For less contrast

For more contrast

For less brightness

For more
brightness

For weaker red

For stronger red

For weaker green

For weaker blue

For stronger blue

For stronger
green

c button

d button

The screen dims

The screen
brightens

For less contrast

For more contrast

For less brightness

For more
brightness

For less colour
intensity

For more colour
intensity

Skin tones
become purplish

For less sharpness

For more
sharpness

Skin tones
become greenish

LC-32SA1E_GB_b

06.7.25, 11:35 AM

12