DOWNLOAD Sharp LC-32SA1E (serv.man2) Service Manual ↓ Size: 39.39 MB | Pages: 127 in PDF or view online for FREE

LC-26SA1E/RU, LC-32SA1E/RU

5 – 15

1

Setting

[Signal]
PAL
Full Field Color Bar
Composite or RF signal

[Terminal]
EXT3 VIDEO IN
TUNER

•Feed the PAL full field colour bar signal (75% colour saturation) to    
  EXT3 VIDEO IN.
•Feed the RF signal (PAL colour bar) to TUNER.
•Make sure the PAL colour bar pattern  has the sync level of 7:3 with 
  the picture level.

2

Auto adjustment
performance

Adjustment process
Page3

Bring the cursor on [

PAL + TUNER ADJ] and press [OK]

[

PAL + TUNER ADJ  OK] appears when finished.

1

Setting

[Signal]
PAL
Full Field Color Bar
Composite or RF SMPTE signal
[Terminal]
EXT3 VIDEO IN
TUNER

•Feed the PAL full field color bar signal (75% color saturation) to EXT3 
VIDEO IN
•Feed the RF signal SMPTE color bar (E-12) to TUNER.
•Make sure the SMPTE color bar pattern (E-12) has the sync level of 
7:3 with the picture level.

2

Auto adjustment
performance

Adjustment process
Page6

Bring the cursor on [

PAL +TUNER ADJ] and press [OK].

[

PAL+ TUNER ADJ OK] appears when finished.

1

Setting

[Signal]
COMP15K, 50Hz
100% Full Field Colour Bar

[Terminal]
EXT4 COMPONENT IN

•Feed the COMPONENT 15K 100% full field colour bar signal (100%    
  colour saturation) to EXT4 COMPONENT IN.

2

Auto adjustment
performance

Adjustment process
Page4

Bring the cursor on [

COMP15K ADJ] and press [OK]

[

COMP15K ADJ  OK] appears when finished.

㸡

100% white

㪲

VIDEO IN SIGNAL]

㸡

100% white

[RF Signal]

100% white

Black

     LC-26SA1E/RU, LC-32SA1E/RU

5 – 16

Adjustment gradation values (IN) appear on page 7/11 of process adjustment, and adjustment initial values (offset value) appear on pages 8/11 and
9/11. For white balance adjustment, adjust the offset values on pages 8/11 and 9/11.

[Condition of the unit for inspection]  Modulated light: MAX (+8)

[Adjustment reference device]  Minolta CA-210

[Adjustment]

Check that the values on page 7/11 of process adjustment are set as below. If not, change them accordingly.

1) Display the current adjustment status at point 6. (Page 8/11 of process adjustment)

The display for checking the adjustment status is toggled by pressing the “6” button on the remote control.

(Normal OSD display 

→ “6”→ display for check (OSD disappears) → “6” →normal OSD display →  •  •  •)

2) Read the value of the luminance meter.

3) Change M GAMMA R6/M GAMMA  B6 (Adjustment offset value) on page 9/11 of process adjustment so that the values of the luminance meter

approach x =0.272 and y =0.277.

(Basically, G is not changed. If adjustment fails with R and B, change G. When G is lowered, the weaker of R and B must be fixed.)

4) If G is changed in step 3),  change the values of M GAMMA G1-M GAMMA G5 on pages 8/11 and 9/11 of process adjustment as follows. When

not changed, go to step5).

Offset value of M GAMMA G1 = (Offset value of M GAMMA G6) * (160/960)

Offset value of M GAMMA G2 = (Offset value of M GAMMA G6) * (320/960)

Offset value of M GAMMA G3 = (Offset value of M GAMMA G6) * (480/960)

Offset value of M GAMMA G4 = (Offset value of M GAMMA G6) * (640/960)

Offset value of M GAMMA G5 = (Offset value of M GAMMA G6) * (800/960)

5) Display the adjustment status of the current point 5. (Each time the “5” button on the remote control is pressed, the adjustment status check dis-

play is toggled.)

(Normal OSD display 

→ “5” → Check display (OSD disappears) → “5” → Normal OSD display → • • •)

Change M GAMMA R5/M GAMMA B5 (adjustment offset value) on page 9/11 of process adjustment so that the values of the luminance meter
approach x = 0.272 and y = 0.277.

6) Repeat step 5) for points 4, 3, 2,  and 1.

M GAMMA IN 1

160

M GAMMA IN 2

320

M GAMMA IN 3

480

M GAMMA IN 4

640

M GAMMA IN 5

800

M GAMMA IN 6

960

LC-26SA1E/RU, LC-32SA1E/RU

5 – 17

During servicing of the LCD TV set , by software upgrading or by any cleaning NVM, itÅfs mandatory select the ÅgInch SettingÅh in Service Mode,
Page 2, according to the size of the TV set.

Caution:

When the factory settings have been made,  all user setting data,  including the channel settings,  are initialized. (The adjust-
ments done in the adjustment process mode are not initialized.) Keep this in mind when initializing these settings.

1

Factory settings

Forcibly turn off the power
(See to below caution)

•Enter  the adjustment process mode.
•Move the cursor to [Factory Init] on page 2/11.
•Use the R/C  

key to select a region from [EURO/UK/ITALY/

FRANCE/RUSSIA]and press the [OK] key.
“EXECUTING” appears and initialization starts.
After a  while,”***OK***” appears and the setting is complete.
Note: Never turn the power off during initialization.
•The following items are initialized in the factory setting.
1. User settings
2. Channel data (e.g. broadcast frequencies)
3. Password data

After adjustments,  exit the adjustment process mode.
To exit the adjustment process mode,  unplug the AC power cord from the outlet to forcibly turn off the power.
When the power is turned off with the remoto control, unpulug the AC power cord and plug it back  in.

     LC-26SA1E/RU, LC-32SA1E/RU

5 – 18

This LCD colour television has a function (lamp error detection) to be turned OFF automatically (Inverter unit) for safety when the lamp or lamp circuit
is abnormal.

If the lamp or lamp circuit is abnormal, or some other errors happen, and the lamp error detection is executed, the following occur.The Inverter circuit
stops but the rest of TV continues working. The power led is green.

Proceed to repair the inverter unit to solve the problem that produces the lamp error.

For 26/32” this is not necessary because the lamp error detection is not operative by software.

Turn on the power and enter in the Adjustment Process mode (ADJ1 or Service Mode) as usual.

In the [INIT], Page 2/11 of Service, turns ON the Public Mode option.

Turn off TV by pressing Main Power switch.

While pressing “VOL+” and “P^” keys at the same time, press Main Power switch for more than 2 seconds.

After this sequence the TV will turn on showing the Public Mode setting screen as follows:

Is possible to select each item of function by pressing cursor UP/DOWN keys on the remote control or CH(

)(

) keys on the LCD TV.

The setting position of each item of functions is made by pressing cursor RIGHT/LEFT keys on the remote control or VOL(+)(-) keys on the LCD TV.

Select EXECUTE position after you set all function, and press cursor RIGHT/LEFT keys on the remote control or VOL(+)/(-) keys on the LCD TV for
confirmation.

1. POWER ON FIXED [VARIABLE 

↔ FIXED]

When it is set to “FIXED” the TV is impossible to be switch off by Main Switch or Remote Control.

2. MAXIMUM VOLUME [0 

↔ 60]

Is possible to set the maximum volume at limited level.

3. VOLUME FIXED [VARIABLE 

↔ FIXED]

Is possible to fix the sound volume at limited level.

When “FIXED” is selected the sound volume before limited is fixed.

4. VOLUME FIXED LEVEL [0 

↔ 60]

If “FIXED” has been selected, is possible to set a fixed volume at the level that is chosen.

5. RC BUTTON [RESPOND 

↔ NO RESPOND]

If “NO RESPOND” is selected, the remote control keys are inoperative.

6. PANEL BUTTON [RESPOND 

↔ NO RESPOND]

If “NO RESPOND” has been selected, the set’s keys remain deactivated (Except POWER key).

7. MENU BUTTON [RESPOND 

↔ NO RESPOND]