DOWNLOAD Sharp LC-32RD2E (serv.man4) Service Manual ↓ Size: 4.54 MB | Pages: 22 in PDF or view online for FREE

  LC-32RD2E/RU, LC-37RD2E/RU

3 – 9

• How to setup the “Winupload” software for the first time:

1. Start “Winupload”. It will appear the following picture.

2. Select the most suitable RS232 Serial Port from “Port Setting” - “Process” Menu.

3. Select the following settings from “Port Settings” Menu.

                 Bits Per Second: 115200

                 Parity: None

                 Data bits: 8

                 Stop bits: 1

                 Hardware Flow Control: OFF

• Procedure for updating the TV set.

1. Switch off the TV set to be updated, in DTV mode.

2. Start “Winupload”. It will appear the following picture on PC.

LC-32RD2E/RU, LC-37RD2E/RU

3 – 10

3. Establish connection on Winupload Software.

4. Select “Upload URT file”

5. Select and open the “.urt” data file from data directory

NOTE: Consider the version shown below just an example, may be is not the latest one, and could be different depending on the TV set destination

(market/Country) or model.

6. Switch On the TV Set (previously in DTV Mode). The Uploading Process starts automatically.

  LC-32RD2E/RU, LC-37RD2E/RU

3 – 11

                While the TV set is uploading the software, the following information is shown on the TV set screen.

Then, data transfer from PC to TV set finishes when the “Upload progress completed” label appears in the “Winupload” screen. Now, the TV set made
some additional verification (Items #2 to #7). When the full uploading process is finished, in the “Winupload” window appears the label “Preparing to
start application” for a new TV Set, and just now, in the TV screen of the updated set, appears a congratulations label (Item #8).

NOTE: Do not turn off the TV set while the software updating was in progress.

7. Unplug the AC cord.

8. Disconnect the Jig from TV Set.

• Software Version verification procedure.

1. Connect the AC cord and Switch On the TV Set.

2. Select DTV Menu on TV Set. The following On Screen Display will appear.

LC-32RD2E/RU, LC-37RD2E/RU

3 – 12

3. Select “Version”. The updated version can be verified.

NOTE: Consider the version shown above just as example, may be is not the latest one, and could be different depending on the TV set destination

(market/Country) or model.

• Hardware requirements:

1. Compact Flash Memory Card.

2. PCMCIA Compact Flash Adapter or USB Multi Card Reader.

• Software requirements:

1. “StorageMediaManager1.0.1” application software, installed on PC.

2. “Loader 2.2” or higher application software, installed on DTV Set.

NOTE: Storage Media Manager only for Windows XP.

• How to prepare the CF Card using the “Storage Media Manager 1.0.1” (SMM):

1. Insert PCMCIA (Compact Flash (CF) + CF-Adapter)

2. Execute SMM. If SMM does not appear or a Windows Error Box appears, please verify there are no USB media drives connected to the PC.

NOTE: Consider that it's recommended remove unnecessary media during SMM execution. Probably, If you try to use an USB Multi Card Reader

3. If the CF card has never been formatted for the SMM (is not same format type used in Windows), the SMM will show you the PCMCIA-CF drive as
     a Windows Media Drives, hanged of the “My Computer” tree (“J” Drive in the picture showed below).

But, if the PCMCIA-CF card had been formatted previously by SMM, directly the PCMCIA-CF drive will appear in the SMM formatted Drives box
(Sharp Drives). Please go to Item #6.