Sharp LC-32RD2E (serv.man2) Service Manual ▷ View online
LC-32RD2E/RU, LC-37RD2E/RU
2 – 1
LC32RD2E
Service Manual
CHAPTER 2.
REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS (LC-32RD2E/RU)
1. Remove the 9 lock screws
, and the 4 lock screws
. Detach the Rear Cabinet.
2. Remove the 3 lock screws
. Detach the Bottom Cover.
3. Remove the 6 lock screws
. Detach the Support Angle and Stand Angle.
1
2
Rear Cabinet
1
2
3
4
Bottom Cover
Stand Angle
Support Angle
4
3
LC-32RD2E/RU, LC-37RD2E/RU
2 – 2
4. Remove the 2 lock screws
. Detach the Top Cover.
5. Remove the 6 lock scrwes
. Detach the Center Angle-L/R.
5
Wire "KM" into WH
Top Cover Ass'y
Wire "KM" (to P153)
5
6
Center Angle L
Center Angle R
6
LC-32RD2E/RU, LC-37RD2E/RU
2 – 3
6. Remove the 2 lock scrwes
. Detach the Digital Shield.
7
Wire Tie
Ferrite Core (to Wire "RA")
DIGITAL SHIELD
7
LC-32RD2E/RU, LC-37RD2E/RU
2 – 4
7. Remove all the connectors from PWBs.
Wire "SP", "RA" to WH
Wire "RA" to WH
Check that tape is wound up to wire "RA", "SP"
Wire tie of wire "RA" and "SP"
Ferrite core of wire "RA", "SP"
Between each Red/Black
Between each White/Black
To pin of cabinet
