Sharp LC-32LE361E Service Manual ▷ View online
17
LC-32/40LE361
LC-32/40LE360
LC-32/40LE362
LC-32/40LE363
Options 3
Tuner Settings
18
LC-32/40LE361
LC-32/40LE360
LC-32/40LE362
LC-32/40LE363
Source Settings
Diagnostic
19
LC-32/40LE361
LC-32/40LE360
LC-32/40LE362
LC-32/40LE363
Main SW update
In MB95M project there is several files of software. From following steps software update procedure can be
seen:
1. MB90_en.bin, mboot.bin and usb_auto_update_A1.txt documents should copy directly inside of a
flash memory(not in a folder).
2. Insert flash memory to the TV in USB-1 port when TV is powered off. USB-1 port is just above of yellow
SIDE AV connector.
3. While pushing the OK button in remote control, power on the and wait. TV will power-up itself.
4. When the standby LED starts to blink rapidly, you can release the OK button.
5. If First Time Installation (FTI) screen comes, it means software update procedure is successful.
6. After FTI menu appears, you should power OFF and ON the TV set.
7. Updated software version might be checked from service menu (menu--- 4, 7, 2, 5)
4. When the standby LED starts to blink rapidly, you can release the OK button.
5. If First Time Installation (FTI) screen comes, it means software update procedure is successful.
6. After FTI menu appears, you should power OFF and ON the TV set.
7. Updated software version might be checked from service menu (menu--- 4, 7, 2, 5)
[2] SOFTWARE UPDATE
20
LC-32/40LE361
LC-32/40LE360
LC-32/40LE362
LC-32/40LE363
CHAPTER 6. TROUBLESHOOTING
[1] Troubleshooting
15. TROUBLESHOOTING
1. NO BACKLIGHT PROBLEM
Problem: If TV is working, led is normal and there is no picture and backlight on the panel.
Possible couses: Backlight pin, dimming pin, backlight supply, stby on/off pin BACKLIGHT_ON/OFF
pin should be high when the backlight is ON. R119 must be low when the backlight is OFF. If it is a
problem, please check Q10 and the panel cables. Also it can be tested in TP50 in main board.
pin should be high when the backlight is ON. R119 must be low when the backlight is OFF. If it is a
problem, please check Q10 and the panel cables. Also it can be tested in TP50 in main board.
Dimming pin should be high or square wave in open position. If it is low, please check S60 for Mstar side
and panel or power cables, connectors.
and panel or power cables, connectors.
Click on the first or last page to see other LC-32LE361E service manuals if exist.