Sharp LC-32LE320E (serv.man2) User Manual / Operation Manual ▷ View online
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to
•
clean the product. Do not use liquid cleaners or aerosol cleaners.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink,
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink,
•
laundry tub, swimming pool and in a wet basement.
Do not place vases or any other water-filled containers on this product.
Do not place vases or any other water-filled containers on this product.
•
The water may spill onto the product causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall,
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall,
•
resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow
the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,
recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow
the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,
•
excessive force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover
•
or block these vents and openings since insufficient ventilation can cause overheating and/or
shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface,
since they can block ventilation openings. This product is not designed for built-in installation; do
not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is
provided or the manufacturer’s instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact
shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface,
since they can block ventilation openings. This product is not designed for built-in installation; do
not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is
provided or the manufacturer’s instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact
•
applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other
•
heat-generating products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
•
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
•
Do not display a still picture for a long time, as this could cause an afterimage to remain.
•
There is power consumption always if main plug is connected.
•
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and
•
other dangerous conditions. Request a qualified person to perform servicing.
For ventilation, leave at least 4” to 6” free all around the TV. Do not place the TV on a carpet.
For ventilation, leave at least 4” to 6” free all around the TV. Do not place the TV on a carpet.
•
The equipment shall not be exposed to dripping or splashing.
•
The equipment shall not be exposed to rain or moisture and objects filled with liquids, such as vases, shall be placed
•
on the apparatus.
The appliance coupler is used as the disconnect device of this apparatus, the disconnect device shall remain readily
The appliance coupler is used as the disconnect device of this apparatus, the disconnect device shall remain readily
•
operable.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a
fixed point of blue, green or red.
This is within product specifications and does not constitute a fault.
precautions when transporting the tV
When moving the TV, it should always be carried by two people, using both hands, be careful not to apply pressure to
the display.
Wall mounting
Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
introduction
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free
operation of your product, please read the Important Safety Precautions carefully before using this product.
Dear SHarp customer
important Safety precautions
WarninG
To prevent the spread of fire, keep candles or other open
flames away from this product at all times.
2
introduction
(poWer)
Press to turn the LCD TV on or
enter standby mode.
b
(input SourCe)
Select an input source.
0-9 DiGit ButtonS
To select a TV channel directly.
epG
Press this button to display
electronic programme guide when
watching digital channels.
pre pr
To display the previous selected TV
channel.
DtV/atV
Press this button to switch between
ATV and DTV channels.
pr liSt
Press to display a list of channels.
Then press
red button to select
the digital or analogue channel list.
(Only available when your input
source is TV).
eCo
Press this button to set the picture
with less brightness for saving
energy.
Ë
Display programme information, if
available.
”
(+/-)
Press to adjust the volume.
Press to toggle audio on and off.
You can also press ”
(+/-) to
restore the previous volume level.
∏
(picture format)
Select picture format to
auto /
normal / Zoom 1 / Zoom 2 / Wide.
p (</>)
Press to select the channel.
Dual
Select
mono / Stereo / Dual
1 / Dual 2 for ATV channel. Select
Audio language for DTV channel.
auDio (aDJ)
Press to set the LCD TV to a
predefined sound setting.
personal / music / Speech
remote control unit
ViDeo (aDJ)
Press to set the LCD TV to a
predefined picture setting.
personal / Standard / Vivid /
movie / eco
Sleep
Press to turn the LCD TV off within
an amount of time. (10 ~ 120
minutes.)
<>≤≥
Press <>≤≥ to navigate and
confirm your selection.
oK
Press to activate a setting.
menu
Press to activate the LCD TV OSD.
eXit
Press to exit the LCD TV OSD or
return to the previous layer.
r/G/Y/B (Colour Button)
Press buttons to select the pictures
with various colours of text. Different
channels display different functions.
teleteXt
Press this button to activate Teletext.
Press again to activate Teletext with TV.
Press again to turn off Teletext.
SuBtitle
For DTV, press this button to toggle
off / between available subtitle
languages.
For ATV, press this button to toggle
off / between available subtitle pages
in Teletext.
SiZe
Press this button to change the
font size: Full screen, Top half and
Bottom half.
SuBpaGe
To select the subpage when the
current page contains subpage(s).
inDeX
Press this button to return to page
100 or the index page; and then
press 0 to 9. The teletext page will
be numbered and added to the page
you select or the secondary item.
HolD
Press this button to stop the
scrolling of pages.
The text decoder stops receiving
data.
reVeal
Reveal hidden information such as
answers to a quiz.
FreeZe
Press to freeze a moving image on
the screen. (Only available when
your input source is TV).
Scart output signal will also be
frozen when you are watching digital
channels.
in uSB mode:
(You need to programme the setting
with remote control to control
connected devices.)
K
Press to skip back to the previous
title or track.
H
Press to stop playback.
I
/ F
Press to start/pause playback.
Caution: Do not freeze the video
image for long periods of time. You
may damage the TV screen.
L
Press to skip forward to the next title
or track.
3
introduction
tV (Front view)
(On) indicator
Remote control sensor
tV (rear view)
22”
19”
26”
POWER button
Volume buttons
MENU button
COMMON
INTERFACE
slot
Composite
(AV IN, AV/LR)
Earphone Output
AC IN
PC IN (VGA / AUDIO)
COMPONENT (VIDEO
and L/R AUDIO INPUT)
SCART (CVBS Tuner out)
AV VIDEO and L/R Audio Output
RS-232C
IOIOI
Tuner Input
SPDIF OUT
(Digital audio out)
Tuner Input
SCART 1 (CVBS Tuner out)
SCART 2 (CVBS Monitor out)
AV L/R Audio Output
PC IN (VGA / AUDIO)
COMPONENT (VIDEO and L/R AUDIO INPUT)
HDMI 1
HDMI 2
SPDIF OUT
(Digital audio out)
HDMI 1
P ( )
Programme (Channel)
buttons
Power conntector
USB
HDMI 2
COMMON
INTERFACE
slot
Composite
(AV IN, AV/LR)
Earphone Output
RS-232C
IOIOI
USB
HDMI 3
32”
37”
42”
37”
42”
INPUT SOURCE
button
rS232C-connector
• The RS232 connector is only used for service purpose.
4
preparation
Supplied accessories
Operation Manual
Quick Setup Guide
Operation Manual
Quick Setup Guide
AC cord (x1)
Product shape varies
in some countries
Product shape varies
in some countries
Remote control (×1)
AAA battery (×2)
AAA battery (×2)
x 3
19”
22”
22”
37”
42”
42”
26”
32”
32”
Stand unit and screws
x 4
mount the tV stand
3
19”
22”
22”
26”
32”
37”
32”
37”
42”
Put the TV face down on a safe surface that is
1�
covered by a soft and smooth cloth.
Adjust the TV stand to the bottom of the TV.
2�
Fasten the screws by using a cross-head
3�
screwdriver (Not supplied).
note
To detach the TV stand, perform the steps in reverse
•
order.
Wall mounting
W
H
tV screen
size
( inches)
size
( inches)
VeSa-
compatible
wall bracket
(millimeters)
(W x H)
compatible
wall bracket
(millimeters)
(W x H)
Screw type
19”
75 x 75 mm
Metric 4 x 10 mm
22”
75 x 75 mm
Metric 4 x 10 mm
26”
75 x 75 mm
Metric 4 x 10 mm
32”
200 x 100 mm
Metric 6 x 10 mm
37”
200 x 200 mm
Metric 6 x 10 mm
42”
200 x 200 mm
Metric 6 x 10 mm
note
At the time of purchasing wall bracket, please check if
•
there is enough space between the wall bracket and TV
terminals for the terminal connection.
terminals for the terminal connection.
5