Sharp LC-32LE210EB (serv.man21) User Manual / Operation Manual ▷ View online
Connecting external devices
NOTE
• In cases when the decoder needs to receive a signal from
the TV, make sure to select the appropriate input terminal to
which the decoder is connected in “Input Source” (Page 10).
which the decoder is connected in “Input Source” (Page 10).
SCART connection
Example of connectable devices
● VCR ● Decoder
● DVD player/recorder
Speaker/amplifier connector
Connect an amplifier with external speakers as shown
below.
below.
15
SCART cable
Decoder
Audio cable
Amplifier with digital
audio input
●
●
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input
and external speakers as shown, you should set an
audio output format compatible with the programme
you are watching or the device connected.
After connecting an amplifier with digital audio input
and external speakers as shown, you should set an
audio output format compatible with the programme
you are watching or the device connected.
Go to “MENU” > “SOUND” > “SPDIF Mode”
> select “PCM” or “Dolby Digital”.
> select “PCM” or “Dolby Digital”.
NOTE
• When you set this to “Dolby Digital”, and you
• When you set this to “Dolby Digital”, and you
receive the Dolby Digital or Dolby Digital Plus
audio formats, Dolby Digital audio is output.
Otherwise, PCM audio is output.
When you set this to “PCM”, PCM audio is output
no matter what audio formats you receive.
audio formats, Dolby Digital audio is output.
Otherwise, PCM audio is output.
When you set this to “PCM”, PCM audio is output
no matter what audio formats you receive.
Example of connectable devices
●
Connecting an amplifier with digital audio
input
SPDIF
HDMI (DVI) Connection
ø 3,5 mm stereo mini jack cable
HDMI 1, 2 or 3
HDMI-certified cable
DVI/HDMI Cable
PC connection
PC
PC
Connecting a PC
Analogue Connection
ø 3,5 mm stereo
mini jack cable
VGA cable
You can select the picture size.
1
Press MENU
on the remote control.
2
Press
▼ key to select “Aspect ratio”.
3
Press
► key to select the desired item.
Item
Normal 4:3
Keeps the original aspect ratio in a full
screen display
screen display
Full
An image fully fi lls the screen
Dot by Dot
Displays an image with the same
number of pixels on the screen
number of pixels on the screen
NOTE
• You can also select an item by pressing
f on the remote
control unit.
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• The “Aspect ratio” adjustment is only available for analogue
• The “Aspect ratio” adjustment is only available for analogue
signals through the “PC IN” terminal.
NOTE
• When using the PC-IN terminal is necessary to connect a
audio cable.
Normal
Full
Example
DVI/VGA Conversion cable
ø 3,5 mm stereo
mini jack cable
16
Selecting the picture size
●
●
After connection
● If after connecting a PC to the TV through a HDMI
cable, the audio does not run, connect a mini stereo
connector of ø 3.5mm between TV and PC as
indicated in the previous drawing
cable, the audio does not run, connect a mini stereo
connector of ø 3.5mm between TV and PC as
indicated in the previous drawing
.
● When a PC is connected to the TV with a DVI
cable, it will be necessary to connect a mini stereo
connector of ø 3.5mm of the TV to PC as indicated
in the previous drawing.
cable, it will be necessary to connect a mini stereo
connector of ø 3.5mm of the TV to PC as indicated
in the previous drawing.
AUDIO IN
HDMI (DVI)
PC
PC
Resolution
Horizontal
Frequency
Vertical
Frequency
VGA
640
g 480
31,5 kHz
60 Hz
VGA
720
g 400
31,47 kHz
70 Hz
SVGA
800
g 600
37,9 kHz
60 Hz
XGA
1.024
g 768
48,4 kHz
60 Hz
WXGA
1.360
g 768
47,7 kHz
60 Hz
SXGA
1.280
g 1.024
64,0 kHz
60 Hz
SXGA+
1.400
g 1.050
65,3 kHz
60 Hz
UXGA
1.600
g 1.200
75,0 kHz
60 Hz
1080p
1.920
g 1.080
67,5 kHz
60 Hz
PC compatibility chart
NOTE
• This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly to
the VESA 60 Hz standard. Any variations from this standard
may result in picture distortions.
the VESA 60 Hz standard. Any variations from this standard
may result in picture distortions.
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and
UXGA are registered trademarks of International
Business Machines Corporation.
UXGA are registered trademarks of International
Business Machines Corporation.
1
1
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available DVI/VGA conversion
cable, etc.
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available DVI/VGA conversion
cable, etc.
1.
Press
b to select “PC-RGB” from INPUT
SOURCE
, and then press OK.
2.
Press MENU key and go to PICTURE
s Screen
s Auto adjust, and then press OK.
NOTE
• When connect a PC and select PC-RGB source, the
“Auto adjust”
is executed automatically.
• “Auto adjust”
may fail if the PC image has low
resolution, has unclear (black) edges, o is moved
while executing “Auto adjust”.
while executing “Auto adjust”.
• Be sure to connect the PC to the TV and switch it on
before starting “Auto adjust”.
• “Auto adjust”
can be executed only when inputting
analoque signals through the “PC IN” terminal.
Adjusting the PC image
automatically
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as necessary
to change image position using “Auto adjust”. In
some cases, however, manual adjustment is needed
to optimise the image.
to change image position using “Auto adjust”. In
some cases, however, manual adjustment is needed
to optimise the image.
1.
Press
b to select PC-RGB from INPUT
SOURCE
, and then press OK.
2.
Press MENU key and go to PICTURE
s Screen.
3.
Press
▲/▼ to select the specific adjustment item.
4.
Press
◄/► to adjust the item to the desired
position.
Item
H-Pos.
Centres the image by moving it to the
left or right.
left or right.
V-Pos.
Centres the image by moving it up or
down.
down.
Size
Changes the image size.
Phase
Adjusts when characters have low
contrast or when the image fl ickers.
contrast or when the image fl ickers.
Connecting a PC
NOTE
• The “Screen” options in the “PICTURE” menu can be
adjusted only when inputting analogue signals through the
“PC IN” terminal.
“PC IN” terminal.
17
NOTE
• The menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from
the actual screens.
• Items in darker grey cannot be selected.
Menu operation
1
3
2
What is the menu?
• You need to call up the OSD to perform settings for the TV. The OSD for the settings is called menu.
• The menu enables various settings and adjustments.
• The menu can be operated with the remote control unit and with the TV panel control keys.
• The menu enables various settings and adjustments.
• The menu can be operated with the remote control unit and with the TV panel control keys.
Common operations
Operation without a remote control unit
(with the TV panel control keys)
About the Guide Display
The Guide Display at the bottom of the screen shows
operations with the OSD.
operations with the OSD.
The bar above is an operational guide for the remote
control unit. The bar will change in accordance with
each menu setting screen.
control unit. The bar will change in accordance with
each menu setting screen.
Picture mode User Eco
Picture mode User
Backlight
50
Contrast
50
Backlight
50
This function is useful when there is no
remote control unit within your reach.
remote control unit within your reach.
1
Press MENU and the “PICTURE”
screen displays.
screen displays.
2
Press P
r/s instead of
a/b or
i
k/l instead of c/d to select
the item.
3
Press
b to complete the setting.
NOTE
• The “PICTURE” screen will disappear if left unattended for
several seconds.
18
Display the menu
screen
Exit the menu
screen
Select an item
Press MENU and the “PICTURE”
screen displays.
screen displays.
The operation will exit the menu
screen if you press END before it is
completed.
screen if you press END before it is
completed.
Press
a/b/c/d to select/adjust the
desired menu, and adjust the item to
the desired level, and then press OK.
the desired level, and then press OK.
Press MENU to return to the previous
page.
page.
E
Selecting in the menu
E
Selecting options
PICTURE
Picture mode User
Backlight
50
Contrast
50
Brightness
50
Colour
50
Sharpness
60
END
MENU
OK
END
MENU
OK
Click on the first or last page to see other LC-32LE210EB (serv.man21) service manuals if exist.