Sharp LC-32FH510E (serv.man7) Service Manual ▷ View online
21
Page
Line
Sub
Page
Item
Description
Remarks (adjustment details, etc.)
01/17
[SHARP FACTORY MENU
ADC ADJUST (continued)
ADC ADJUST Submenu
Press “OK” to enter to ADC ADJUST Submenu
10
13/17
B-GAIN
67
Press “◄” or “►” for manual adjustment.
R-OFFSET
128
Press “◄” or “►” for manual adjustment.
G-OFFSET
128
Press “◄” or “►” for manual adjustment.
B-OFFSET
128
Press “◄” or “►” for manual adjustment.
AUTO ADC
Press “►” for automatic adjustment in each mode.
11
GAMMA (1/3)
GAMMA Submenu
Press “OK” to enter to GAMMA Submenu
14/17
MGAMMA IN1
40
W/B adjustment, gradation 1 input setting.
MGAMMA IN2
80
W/B adjustment, gradation 2 input setting.
MGAMMA IN3
120
W/B adjustment, gradation 3 input setting.
MGAMMA IN4
160
W/B adjustment, gradation 4 input setting.
MGAMMA IN5
200
W/B adjustment, gradation 5 input setting.
MGAMMA IN6
240
W/B adjustment, gradation 6 input setting.
MGAMMA WRITE
EEP writing of adjustment values.
MGAMMA RESET
Initialization of adjustment values.
GAMMA (2/3)
GAMMA Submenu
15/17
MGAMMA R1
164
W/B adjustment, gradation 1R adjustment value.
MGAMMA G1
169
W/B adjustment, gradation 1G adjustment value.
MGAMMA B1
191
W/B adjustment, gradation 1B adjustment value.
MGAMMA R2
319
W/B adjustment, gradation 2R adjustment value.
MGAMMA G2
327
W/B adjustment, gradation 2G adjustment value.
MGAMMA B2
366
W/B adjustment, gradation 2B adjustment value.
MGAMMA R3
458
W/B adjustment, gradation 3R adjustment value.
MGAMMA G3
474
W/B adjustment, gradation 3G adjustment value.
MGAMMA B3
524
W/B adjustment, gradation 3R adjustment value.
MGAMMA WRITE
EEP writing of adjustment values.
GAMMA (3/3)
W/B ADJUST Submenu
16/17
MGAMMA R4
607
W/B adjustment, gradation 4R adjustment value.
MGAMMA G4
627
W/B adjustment, gradation 4G adjustment value.
MGAMMA B4
697
W/B adjustment, gradation 4B adjustment value.
MGAMMA R5
762
W/B adjustment, gradation 5R adjustment value.
MGAMMA G5
770
W/B adjustment, gradation 5G adjustment value.
MGAMMA B5
857
W/B adjustment, gradation 5B adjustment value.
MGAMMA R6
900
W/B adjustment, gradation 6R adjustment value.
MGAMMA G6
895
W/B adjustment, gradation 6G adjustment value.
MGAMMA B6
1000
W/B adjustment, gradation 6R adjustment value.
MGAMMA WRITE
EEP writing of adjustment values.
12
SYSTEM INFORMATION
SYSTEM INFORMATION
Submenu
Press “OK” to enter to SYSTEM INFORMATION Sub-
menu (Only for Engineering purpose, don’t use)
menu (Only for Engineering purpose, don’t use)
17/17
NOISE LEVEL
0
Informative (changing).
GLOBAL MOTION
XXX
Informative (changing).
BIT RATE
XXXXXXX
Informative.
Scan name search
2
Changeable between 0 and 255.
VPS code
FFFF
Informative.
830/1 code
FFFF
Informative.
830/2 code
FFFF
Informative.
Top TXT enabled
1
Press “◄” or “►” to change 0/1.
CEC
off
LC-32FH500
LC-32FH510
LC-32FH510
22
6. Video Signal Adjustment Procedure
6.1. RGB SCART ADC
1. Enter in Service mode.
2. Press “▼” until selecting “ADC ADJUST” option.
3. Press “OK”.
4. “ADC ADJUST” menu appears.
5. Press “▼” until selecting “ADJUST” option.
6. Press “►”until selecting “Internal Signal”.
7. Press “▲”until selecting “MODE” option.
8. Press “►”until selecting “RGB”.
9. Press “▼” until selecting “AUTO ADC” option.
10. Press “►”, the adjustment starts.
11. “SUCCESS” appears when the adjustments fi nish.
12. Exit of Service mode.
2. Press “▼” until selecting “ADC ADJUST” option.
3. Press “OK”.
4. “ADC ADJUST” menu appears.
5. Press “▼” until selecting “ADJUST” option.
6. Press “►”until selecting “Internal Signal”.
7. Press “▲”until selecting “MODE” option.
8. Press “►”until selecting “RGB”.
9. Press “▼” until selecting “AUTO ADC” option.
10. Press “►”, the adjustment starts.
11. “SUCCESS” appears when the adjustments fi nish.
12. Exit of Service mode.
6.2. COMPONENTS ADC
1. Enter in Service mode.
2. Press “▼” until selecting “ADC ADJUST” option.
3. Press “OK”.
4. “ADC ADJUST” menu appears.
5. Press “▼” until selecting “ADJUST” option.
6. Press “►”until selecting “Internal Signal”.
7. Press “▲”until selecting “MODE” option.
8. Press “►”until selecting “YPbPr(SD)” or “YPbPr(HD)”
9. Press “▼” until selecting “AUTO ADC” option.
10. Press “►”, the adjustment starts.
11. “SUCCESS” appears when the adjustments fi nish.
2. Press “▼” until selecting “ADC ADJUST” option.
3. Press “OK”.
4. “ADC ADJUST” menu appears.
5. Press “▼” until selecting “ADJUST” option.
6. Press “►”until selecting “Internal Signal”.
7. Press “▲”until selecting “MODE” option.
8. Press “►”until selecting “YPbPr(SD)” or “YPbPr(HD)”
9. Press “▼” until selecting “AUTO ADC” option.
10. Press “►”, the adjustment starts.
11. “SUCCESS” appears when the adjustments fi nish.
Note: both SD and HD are adjusted.
12. Exit of Service mode.
LC-32FH500
LC-32FH510
LC-32FH510
23
7. White Balance Adjustment
Condition: AV MODE= Dynamic (backlight at max.).
• Adjustments reference device: Minolta CA-210
• Adjustments target: x=0.272, y=0.277
High: adjustments spec ±0.001, inspection spec: ±0.002
Low: adjustments spec ±0.002, inspection spec: ±0.004
• Adjustments reference device: Minolta CA-210
• Adjustments target: x=0.272, y=0.277
High: adjustments spec ±0.001, inspection spec: ±0.002
Low: adjustments spec ±0.002, inspection spec: ±0.004
1. Press “▼” until selecting “GAMMA” option.
2. Press “OK”.
3. “GAMMA” menu appears.
4. Press “▼” until selecting “MGAMMA RESET”.
5. Press “►”, to restore default values.
6. “MGAMMA RESET SUCCESS” appears.
7. Press “P+” to increase one page.
8. Press “1”, appears “Internal Adjustments Pattern 1”.
9. Hold the default value for “MGAMMA G1”.
(Note: next, try to get the (x, y) adjustments target,
changing “MGAMMA R1” and “MGAMMA B1” as follow).
10. Press “▼” until selecting “MGAMMA R1”.
11. Press “◄ ►” until you obtain the desired value.
12. Press “MENU” to return to previous menu.
13. Press “▼” until selecting “MGAMMA B1”.
14. Press “◄ ►” until you obtain the desired value.
15. Press “MENU” to return to previous menu.
2. Press “OK”.
3. “GAMMA” menu appears.
4. Press “▼” until selecting “MGAMMA RESET”.
5. Press “►”, to restore default values.
6. “MGAMMA RESET SUCCESS” appears.
7. Press “P+” to increase one page.
8. Press “1”, appears “Internal Adjustments Pattern 1”.
9. Hold the default value for “MGAMMA G1”.
(Note: next, try to get the (x, y) adjustments target,
changing “MGAMMA R1” and “MGAMMA B1” as follow).
10. Press “▼” until selecting “MGAMMA R1”.
11. Press “◄ ►” until you obtain the desired value.
12. Press “MENU” to return to previous menu.
13. Press “▼” until selecting “MGAMMA B1”.
14. Press “◄ ►” until you obtain the desired value.
15. Press “MENU” to return to previous menu.
(Note: In case of not being possible to achieve the desired
(x, y) target, try to get it by changing also the “MGAMMA G1”)
(x, y) target, try to get it by changing also the “MGAMMA G1”)
16. Press “2”, appears “Internal Adjustments Pattern 2”.
17. Repeat from step 9 to 15 for the “MGAMMA R2” and “MGAMMA B2”.
18. Press “3”, appears “Internal Adjustments Pattern 3”.
19. Repeat from step 9 to 15 for the “MGAMMA R3” and “MGAMMA B3”.
20. Press “4”, appears “Internal Adjustments Pattern 4”.
21. Repeat from step 9 to 15 for the “MGAMMA R4” and “MGAMMA B4”.
22. Press “5”, appears “Internal Adjustments Pattern 5”.
23. Repeat from step 9 to 15 for the “MGAMMA R5” and “MGAMMA B5”.
24. Press “6”, appears “Internal Adjustments Pattern 6”.
25. Repeat from step 9 to 15 for the “MGAMMA R6” and “MGAMMA B6”.
26. Press “▼” until selecting “MGAMMA WRITE”.
27. Press “►”, to save the new values.
28. “MGAMMA WRITE SUCCESS” appears.
17. Repeat from step 9 to 15 for the “MGAMMA R2” and “MGAMMA B2”.
18. Press “3”, appears “Internal Adjustments Pattern 3”.
19. Repeat from step 9 to 15 for the “MGAMMA R3” and “MGAMMA B3”.
20. Press “4”, appears “Internal Adjustments Pattern 4”.
21. Repeat from step 9 to 15 for the “MGAMMA R4” and “MGAMMA B4”.
22. Press “5”, appears “Internal Adjustments Pattern 5”.
23. Repeat from step 9 to 15 for the “MGAMMA R5” and “MGAMMA B5”.
24. Press “6”, appears “Internal Adjustments Pattern 6”.
25. Repeat from step 9 to 15 for the “MGAMMA R6” and “MGAMMA B6”.
26. Press “▼” until selecting “MGAMMA WRITE”.
27. Press “►”, to save the new values.
28. “MGAMMA WRITE SUCCESS” appears.
NOTE:
For activating the W/B fl ag, only is necessary to send the order MGAMMA WRITE. After this action, the “W” W/B
fl ag will change to “1”.
For activating the W/B fl ag, only is necessary to send the order MGAMMA WRITE. After this action, the “W” W/B
fl ag will change to “1”.
LC-32FH500
LC-32FH510
LC-32FH510
24
8. Initialization to factory setting
Caution: When the factory settings have been made, all user setting data, including the channel settings, are initialized.
(The adjustments done in the adjustment process mode are not initialized.) Keep this in mind when initializing these settings.
(The adjustments done in the adjustment process mode are not initialized.) Keep this in mind when initializing these settings.
1. Enter in Service mode.
2. Press “▼” or “▲” key until selecting INIT.
3. Press OK key.
4. INIT menu appears and “Factory init” option is selected.
5. Press “◄” or “►” until selecting the option desired (EURO/RUSSIA/SWEDEN/UK/EAST EUROPE).
6. Press OK key and initialization starts.
7. OK, EURO message appears for EURO option when the setting is complete.
2. Press “▼” or “▲” key until selecting INIT.
3. Press OK key.
4. INIT menu appears and “Factory init” option is selected.
5. Press “◄” or “►” until selecting the option desired (EURO/RUSSIA/SWEDEN/UK/EAST EUROPE).
6. Press OK key and initialization starts.
7. OK, EURO message appears for EURO option when the setting is complete.
OK, RUSSIA message appears for RUSSIA option when the setting is complete.
OK, SWEDEN message appears for SWEDEN option when the setting is complete.
OK, UK message appears for UK option when the setting is complete.
OK, EAST EUROPE message appears for EAST EUROPE option when the setting is complete.
Note: Never turn the power off during initialization.
OK, SWEDEN message appears for SWEDEN option when the setting is complete.
OK, UK message appears for UK option when the setting is complete.
OK, EAST EUROPE message appears for EAST EUROPE option when the setting is complete.
Note: Never turn the power off during initialization.
To exit the adjustment process mode, unplug the AC power cord from the outlet to forcibly turn off the power.
The following settings will be back to their factory ones.
• User settings
• Channel data (e.g. broadcast frequencies)
• Maker option setting
• Password data
• Channel data (e.g. broadcast frequencies)
• Maker option setting
• Password data
LC-32FH500
LC-32FH510
LC-32FH510
Click on the first or last page to see other LC-32FH510E (serv.man7) service manuals if exist.