LC-32FH510E (serv.man7). Service Adjustments — Sharp TV Service Manual (repair manual)

Model
LC-32FH510E (serv.man7)
Pages
12
Size
544.19 KB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD / Service Adjustments
File
lc-32fh510e-sm7.pdf
Date

View Sharp LC-32FH510E (serv.man7) Service Manual online

16
SERVICE ADJUSTMENTS
1. Adjustment method after PWB and/or IC replacement due to repair  
 
 
 
 
 
 
 
 
 
 
 
   The unit is set to the optimum at the time of shipment from the factory.   
 
 
 
 
 
                
   If any value should become improper or any adjustment is necessary due to the part replacement, make an adjust-
ment 
according 
to 
the 
following 
procedure. 
         
 
1.1. Procure the following units in order to replace the main unit: 
 
 
 
 
 
  MAIN 
UNIT 
 
DUNTKF470FMxx   
 
 
 
 
 
NOTE: [Caution when replacing ICs in the main unit (IC1901, IC1902, IC1006 and IC1007)] 
 
 
Before replacing the relevant part, procure the following parts in which the data have been rewritten. 
 
 
   
 
   
 
 
 
 
Ref.
Description
Parts code IC + data
Description new IC code for service
IC1901
HDMI EDID 1
RH-IXD192WJZZY
VHIM24C02W61EY AND DATA LC32FHxx0E_HDMI_1_EDID
IC1902
HDMI EDID 2
RH-IXD193WJZZY
VHIM24C02W61EY AND DATA LC32FHxx0E_HDMI_2_EDID
IC1006
HDCP USER 
SETTINGS
RH-IXD043WJZZY
RH-IXC986WJZZY AND DATA LC32DH500E_HDCP_KEY
IC1007
FLASH 
MEMORY
RH-IXD194WJZZY
RH-IXC870WJZZY and LC32FH510E_MERGE_1.21
RH-IXD195WJZZY
RH-IXC870WJZZY  and LC32FH500E_MERGE_1.20
RH-IXD197WJZZY
RH-IXC870WJZZY and  LC32FH510S_MERGE_1.20
 
2. Entering and exiting the adjustment process mode. Standard method.
1. By key-unit.
 
1. Unplug the AC power cord. 
2. Press and hold “V-” and “b” keys, simultaneously, and then plug the AC power cord. 
3. “K” appears on the screen. 
4. Press and hold “V-” and “P-” keys, simultaneously. 
5. “SHARP FACTORY MENU” appears (see Figure 1).
6. Unplug the AC power cord to exit of adjustments process. 
2. By own R/C
1. Turn on the TV set. 
2. Press “b”,”2”,”5”, “8”, “0” (the time is limited to 5 sec. approx., for enter this code). 
3. “SHARP FACTORY MENU” appears (see Figure 1).  
4. Press “OK” on lines 5 ~ 12 to go to submenu. 
5. Press “MENU” to return to main menu. 
6. Press “END” to exit of adjustments mode. 
LC-32FH500 
LC-32FH510
17
3. Remote control key operation and description of display in adjustment process mode.
 
1. key operation 
         
  
 
 
   
 
 
 
 
Remote control key
Keyboard unit
Function
 Cursor (▼/▲ ) 
P (
s
/
r
)
Moving an item (line) by one (up/down) on “Sharp Factory Menu” 
or submenus.
OK
b
Selecting a submenu on lines 5 to 12 of “Sharp Factory Menu” or 
executing a function.
 Cursor (◄/►) 
V (+/-)
Changing a selected item setting value.
MENU
MENU
Return to “Sharp Factory Menu” from a submenu.
The required input mode should be switched previously to enter the Service Mode.
   CAUTION: Use due care in handling the information described here lest the users should know how to enter the 
                     adjustment  process  mode. If  the  settings  are  tampered  with  in  this mode, unrecoverable system 
                     damage may result. 
 
 
 
 
 
 
 
 
 
4. Description of display          
       
Figure 1: Main Service Adjustment Menu
← Informative (Main microprocessor version).
← Informative.
← Informative (Remote Control/Keyboard…).
← Informative (None/Lamp Error).
← Press “OK” to go to INIT submenu.
← Press “OK” to go to ADJUST submenu.
← Press “OK” to go to ETC submenu.
← Press “OK” to go to PUBLIC MODE submenu.
← Press “OK” to go to SMARTLOADER submenu.
← Press “OK” to go to ADC ADJUST submenu.
← Press “OK” to go to GAMMA submenu.
← Press “OK” to go to SYSTEM INFORMATION submenu.
SHARP FACTORY MENU
Main version      
       32FH510E SHARP v1.21 SEES v71t MSTAR CL233434 
Bootloader version   
 
BD_MST064E_C01A 2
Normal standby cause  
 
        Remote control
Error standby cause  
 
 
None
INIT
ADJUST
ETC
PUBLIC MODE
SMARTLOADER
ADC ADJUST
GAMMA
SYSTEM INFORMATION
No.   Description
Display specifi cation
(1) 
 Service Information 
Current Software version and others.
(2)
 Item name 
Submenus to be checked or adjusted (by pressing “OK” button)
(3)
 Factory init and Inch setting
Are shown on INIT submenu
(2)
(3)
4
3
4
3
3
2
C
C
S
1
SS
S
1
2
1
SS
0
1
2
32
3
344
(1) 
LC-32FH500 
LC-32FH510
18
Page
Line
Sub
Page
Item
Description
Remarks (adjustment details, etc.)
01/17
[SHARP FACTORY MENU
1
Main Version
32FH510E SHARP v1.21 SEES 
v71t MSTAR CL233434
Informative only (Main microprocessor version)
2
Bootloader Version
BD_MST064E_C01A 2
Informative only
3
Normal Standby Cause
Remote Control / Keyboard...
Informative only
4
Error Standby Cause
None / Lamp Error
Informative only
5
INIT
Factory Init Submenu
Press “OK” to enter to Factory Init Submenu
02/17 Factory 
Init
EURO
Informative (EURO/RUSSIA/SWEDEN/UK/EAST EUROPE)
Inch Setting
SH32_LK315D3LA17
Panel type
Center Acutime
5 H 10 M
RESET
“OK”  Will be displayed
Press “◄ “  or  “ ►” to reset (“OK” will be displayed)
ADJUST
QMAP ADJUST Submenu
Press “OK” to enter to QMAP ADJUST Submenu
03/17
INPUT SOURCE (1/6)
DTV/ RF/Multimedia ...
AFEC
Only for Engineering purpose (Please don’t use)
Comb
Only for Engineering purpose (Please don’t use)
SECAM
Only for Engineering purpose (Please don’t use)
SCinit
Only for Engineering purpose (Please don’t use)
CSC
OFF
Only for Engineering purpose (Please don’t use)
CSC_Dither
OFF
Only for Engineering purpose (Please don’t use)
YCdelay
OFF
Only for Engineering purpose (Please don’t use)
PreFilter
Fir 66
Only for Engineering purpose (Please don’t use)
HSD_Y
ALL PASS1X
Only for Engineering purpose (Please don’t use)
HSD_C
ALL PASS1X
Only for Engineering purpose (Please don’t use)
VSD
OFF
Only for Engineering purpose (Please don’t use)
CTI
CTI_0
Only for Engineering purpose (Please don’t use)
04/17
INPUT SOURCE (2/6)
DTV/ RF/Multimedia ...
MemFormat
422MF
Only for Engineering purpose (Please don’t use)
444To422
ON
Only for Engineering purpose (Please don’t use)
PreSNR
PS_3
Only for Engineering purpose (Please don’t use)
DNR
ON
Only for Engineering purpose (Please don’t use)
DNR_Motion
MR_NR
Only for Engineering purpose (Please don’t use)
DNR_Y
DY_3
Only for Engineering purpose (Please don’t use)
NDR_MED
OFF
Only for Engineering purpose (Please don’t use)
DNR_C
DC_3
Only for Engineering purpose (Please don’t use)
PNR
AVG_ON
Only for Engineering purpose (Please don’t use)
PNR_Y
OFF
Only for Engineering purpose (Please don’t use)
PNR_C
OFF
Only for Engineering purpose (Please don’t use)
PostCSS
OFF
Only for Engineering purpose (Please don’t use)
05/17
INPUT SOURCE (3/6)
DTV/ RF/Multimedia ...
PostCSS_Smooth
PCS_6
Only for Engineering purpose (Please don’t use)
420CUP
ON
Only for Engineering purpose (Please don’t use)
MADi
25_4R
Only for Engineering purpose (Please don’t use)
MADi_Motion
MOT_4R_5
Only for Engineering purpose (Please don’t use)
MADi_ADP3x3
ADP1
Only for Engineering purpose (Please don’t use)
MADi_MORPHO
M1
Only for Engineering purpose (Please don’t use)
MADi_DFK
DFK1
Only for Engineering purpose (Please don’t use)
5. Adjustment process mode menu
LC-32FH500 
LC-32FH510
19
Page
Line
Sub
Page
Item
Description
Remarks (adjustment details, etc.)
1/17
[SHARP FACTORY MENU
ADJUST (continued)
QMAP ADJUST Submenu
Press “OK” to enter to QMAP ADJUST Submenu
05/17
INPUT SOURCE (3/6)
DTV/ RF/Multimedia ...
MADi_SST
SST1
Only for Engineering purpose (Please don’t use)
MADi_Force
OFF
Only for Engineering purpose (Please don’t use)
EODi
SD_8
Only for Engineering purpose (Please don’t use)
Film
SD_2
Only for Engineering purpose (Please don’t use)
Film32
OFF
Only for Engineering purpose (Please don’t use)
06/17
INPUT SOURCE (4/6)
DTV/ RF/Multimedia ...
Film22
SD_DTV
Only for Engineering purpose (Please don’t use)
DIPF
DIPF1
Only for Engineering purpose (Please don’t use)
VCLPF
ON
Only for Engineering purpose (Please don’t use)
Spike_NR
S2
Only for Engineering purpose (Please don’t use)
SPF
ON
Only for Engineering purpose (Please don’t use)
SPF_DBK
OFF
Only for Engineering purpose (Please don’t use)
SPF_SNR
E2S1
Only for Engineering purpose (Please don’t use)
SPF_DBK_SNR_MR
ON
Only for Engineering purpose (Please don’t use)
SPF_MR_LPF
LPF3x3
Only for Engineering purpose (Please don’t use)
SPF_SMR
S2
Only for Engineering purpose (Please don’t use)
SPF_NMR_MR
ON
Only for Engineering purpose (Please don’t use)
DMS
S2
Only for Engineering purpose (Please don’t use)
07/17
INPUT SOURCE (5/6)
DTV/ RF/Multimedia ...
VSP_Y
SRAM_1_4Tap
Only for Engineering purpose (Please don’t use)
VSP_C
ROM_121
Only for Engineering purpose (Please don’t use)
VSP_CoRing
Y_Coring_1
Only for Engineering purpose (Please don’t use)
VSP_DeRing
OFF
Only for Engineering purpose (Please don’t use)
VSP_Dither
OFF
Only for Engineering purpose (Please don’t use)
VSP_PreVBound
OFF
Only for Engineering purpose (Please don’t use)
HSP_Y
SRAM_1_4Tap
Only for Engineering purpose (Please don’t use)
HSP_C
ROM_121
Only for Engineering purpose (Please don’t use)
HSP_CoRing
Y_Coring_1
Only for Engineering purpose (Please don’t use)
HSP_DeRing
OFF
Only for Engineering purpose (Please don’t use)
HSP_Dither
OFF
Only for Engineering purpose (Please don’t use)
HnonLinear
OFF
Only for Engineering purpose (Please don’t use)
08/17
INPUT SOURCE (6/6)
DTV/ RF/Multimedia ...
SRAM1
lnvSinc4Tc4p4Fc85
Fstop134Astop50
Only for Engineering purpose (Please don’t use)
SRAM2
lnvSinc6Tc4p4Fc94
Fstop134Astop60
Only for Engineering purpose (Please don’t use)
422To444
ON
Only for Engineering purpose (Please don’t use)
Peaking
DT_MPEG2_576i
Only for Engineering purpose (Please don’t use)
SwDriver
DynamicDNR_ON
Only for Engineering purpose (Please don’t use)
VIP_CSC
OFF
Only for Engineering purpose (Please don’t use)
VIP_CSC_Dither
OFF
Only for Engineering purpose (Please don’t use)
Color
DT_MPEG2_576i
Only for Engineering purpose (Please don’t use)
3x3
OFF
Only for Engineering purpose (Please don’t use)
Display
ALL
Only for Engineering purpose (Please don’t use)
Post_CON_BRI
OFF
Only for Engineering purpose (Please don’t use)
LC-32FH500 
LC-32FH510
Page of 12
Display

Download Sharp LC-32FH510E (serv.man7) Service Manual (Repair Manual)

Here you can view online or download Sharp LC-32FH510E (serv.man7) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp LC-32FH510E (serv.man7) LCD. Information contained in Sharp LC-32FH510E (serv.man7) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).