Sharp LC-32DH510E Service Manual ▷ View online
13
Removing of major parts (Continued)
6. Remove the 4 lock screws
and detach the POWER Unit.
5. Remove the Speaker (R)
, (L)
.
7. Remove the 4 lock screws
, and detach the MAIN Unit.
8. Remove the 2 lock screws
and detach the MINI AV Cover.
6
7
8
9
10
PowerUnit
MINI AV Cover
Main Unit
9
8
7 Speaker(L)
6 Speaker(R)
10
LC-32DH510
14
Removing of major parts (Continued)
9.Remove the 2 lock screws
, 2 lock screws and detach the Stand Bracket set.
10.Remove the R/C, LED Unit
.
11
13
R/C,LED Unit
13
Stand Bracket set
12
12
11
LC-32DH510
15
Removing of major parts (Continued)
11.Remove the 2 lock screws
and detach the Bracket set.
14
14
Bracket set
LC-32DH510
16
SERVICE ADJUSTMENTS
1. Adjustment method after PWB and/or IC replacement due to repair
The unit is set to the optimum at the time of shipment from the factory.
If any value should become improper or any adjustment is necessary due to the part replacement, make an adjust-
ment
according
to
the
following
procedure.
1.1. Procure the following units in order to replace the main unit:
MAIN
UNIT
DUNTKF261FMxx
NOTE: [Caution when replacing ICs in the main unit (IC1901, IC1902, IC1006 and IC1007)]
Before replacing the relevant part, procure the following parts in which the data have been rewritten.
Ref.
Description
Parts code IC + data
Description new IC code for service
IC1901
HDMI EDID 1
RH-IXD041WJZZY
VHIM24C02W61EY AND DATA LC32DH500E_HDMI_1_EDID
IC1902
HDMI EDID 2
RH-IXD042WJZZY
VHIM24C02W61EY AND DATA LC32DH500E_HDMI_2_EDID
IC1006
HDCP USER
SETTINGS
RH-IXD043WJZZY
RH-IXC986WJZZY AND DATA LC32DH500E_HDCP_KEY
IC1007
FLASH ME-
MORY
RH-IXD147WJZZY
RH-IXD012WJZZY AND LC32DH510E_MERGE_V1.23
2. Entering and exiting the adjustment process mode. Standard method.
1. By key-unit.
1. Unplug the AC power cord.
2. Press and hold “V-” and “b” keys, simultaneously, and then plug the AC power cord.
3. “K” appears on the screen.
4. Press and hold “V-” and “P-” keys, simultaneously.
5. “SHARP FACTORY MENU” appears (see Figure 1).
6. Unplug the AC power cord to exit of adjustments process.
2. Press and hold “V-” and “b” keys, simultaneously, and then plug the AC power cord.
3. “K” appears on the screen.
4. Press and hold “V-” and “P-” keys, simultaneously.
5. “SHARP FACTORY MENU” appears (see Figure 1).
6. Unplug the AC power cord to exit of adjustments process.
2. By own R/C
1. Turn on the TV set.
2. Press “b”,”2”,”5”, “8”, “0” (the time is limited to 5 sec. approx., for enter this code).
3. “SHARP FACTORY MENU” appears (see Figure 1).
4. Press “OK” on lines 5 ~ 12 to go to submenu.
5. Press “MENU” to return to main menu.
6. Press “END” to exit of adjustments mode.
LC-32DH510
Click on the first or last page to see other LC-32DH510E service manuals if exist.