LCD 2013 04 05
Date of Issue:
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 1
Sharp Electronics (UK) Limited
Revision - 1
– Carry out as required
– Carry out as required and whenever the unit comes in for service
– Carry out on all units
SYMPTOM No clock or date information.
When you only use HDMI or VGA, the television cannot receive the clock information
from anywhere and the clock does not work correctly.
When you switch the television into standby, the clock stops counting. When you
switch the television on again, the time and date will be the same as when you
switched off. The product does not have an internal clock.
The internal time and date information is only received via an RF signal or Internet
To resolve the problem, ensure an RF Signal or Internet connection is made to the