DOWNLOAD Sharp LC-32D12EA (serv.man2) Service Manual ↓ Size: 11.31 MB | Pages: 116 in PDF or view online for FREE

e:

Indicates lead-free solder of tin, silver and copper.

“ALL  PWB” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the 

PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.

Example:

When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead 

wire solder may cause damage or accident due to cracks.

As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40°C, we recommend you to 
use a dedicated soldering bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our 

service station or service branch in your area.

As the melting point of lead-free solder (Sn-Ag-Cu) is about 220°C which is higher than the conventional lead solder by 

40°C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended 

period of time. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be 

exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition.

Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and 

off the power of the bit as required.

If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every 

use of it.

When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.

Be careful when replacing parts with polarity indication on the PWB silk.

Lead-free wire solder for servicing.

Indicates lead-free solder of tin, silver and nickel.

Sn-Ag-Ni

English   - 38 -

00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_32883W_YPBPR_ROCKER_10075570_5019xxxx.indd   38

07.09.2011   15:46:29

English   - 8 -

Standby

Image size / Zooms videos (in Media Browser 

video mode)

Sleep Timer

Mono / Stereo - Dual I-II / Currrent Language (*) 

(in DVB channels)

Favourite Mode Selection (in DVB channels)

Numeric buttons

Electronic programme guide (in DVB channels)

No function

Media Browser

Navigation buttons (Up/Down/Left/Right)

No function

Recordings Library

Programme Down / Page up - Programme Up / 

Page down

Mute

Programme recording

Pause (in Media Browser mode) / Timeshift 

recording

Rapid reverse (in Media Browser mode)

Play (in Media Browser mode)

Red button

Green button / List Schedule (in EPG) / Tag 

/ Untag All (in favourite list) / Play-Slideshow 
(in Media Browser) / Loop-Shuffl e (in Media 
Browser)

Picture mode selection / Changes picture mode 

(in Media Browser video mode) 

No function

Teletext / Mix (in TXT mode)

Subtitle on-off (in DVB channels)

Previous programme

AV / Source selection

Menu on-off

Okay (Confi rm) / Hold (in TXT mode) / Edit 

Channel List

Exit / Return / Index page (in TXT mode)

No function

Info / Reveal (in TXT mode)

Volume Up / Down

No function

No function

Rapid advance (in Media Browser mode)

CH

V

Stop (in Media Browser mode)

Blue button / Edit Channel List / Filter (In 

Favourite List&EPG) 

Yellow button / Timeline Schedule (in EPG)

00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_32883W_YPBPR_ROCKER_10075570_5019xxxx.indd   8

07.09.2011   15:45:59

English   - 9 -

1. Standby/On button

2. TV/AV button

3. Programme Up/Down buttons

4. Volume Up/Down buttons

Note: Press  “

HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of 
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD 
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets 
can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI 
connection.

 connects to an aerial antenna system.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device 
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

 input or output for external devices. Connect the SCART cable between SCART socket on TV and 

SCART socket on your external device (such as a decoder, a VCR or a DVD player). 
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note: S-VHS signal is supported via the scart socket.
Note: When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not 
be available via the scart socket.

 is for connecting a personal computer to the TV set. 

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. 

 outputs digital audio signals of the currently watched source. 

Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input

00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_32883W_YPBPR_ROCKER_10075570_5019xxxx.indd   9

07.09.2011   15:45:59