DOWNLOAD Sharp LC-30HV4E (serv.man41) Service Manual ↓ Size: 334.27 KB | Pages: 5 in PDF or view online for FREE

Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your System receives Teletext signals broadcast by a
TV network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.

Teletext is turned on/off with m on the remote control
unit. You can operate your System in Teletext mode
directly by inputting commands with the remote control
unit.

Select a TV channel or external input source
providing the Teletext programme.

Press m to display the Teletext.

Press m again to display the Teletext on the
right screen and normal image on the left
screen.

• Each time you press m, the screen switches

as shown upper right.

• If you select a programme with no Teletext

signal, “No Teletext available.” displays.

• The same message displays during dual

screen or other modes if no Teletext signal is
available.

• Press CHa

a

a

a

a (w) to increase the page number.

• Press CHb

b

b

b

b (x) to decrease the page number.

Colour (RED/GREEN/YELLOW/BLUE):
You can select a group or block of pages displayed in
the coloured  brackets at the bottom of the screen by
pressing the corresponding Colour (RED/GREEN/
YELLOW/BLUE) on the remote control unit.

0 – 9:
Directly select any page from 100 to 899 by using 0 –
9.

v:
Each time you press v, the TELETEXT image switches
as shown below.

k:
To reveal hidden information such as an answer to a
quiz, press k.

• Press k again to hide the information.

u:
To stop updating Teletext pages automatically, press
u.

• Press u again to release the hold mode.

–

+

You can display several subpages as they are
transmitted.

Press m to display Teletext.

Press j to display the subpage as shown
below.

Select the desired subpage by using c/d/
RED/GREEN.

• 0 – 9 directly selects the desired subpage.

Press j to exit the subpage screen.

• If you press CHa

a

a

a

a/CHb

b

b

b

b(w/x), the present

page will change to the next/previous page and
simultaneously exit the subpage screen.

When receiving TOP Teletext, you can read a TOP text
overview.

Press m to display Teletext.

Press  l to display the TOP Overview as
shown below.

Select the desired block or group by using
a/b/c/d.

Press ENTER to display the selected block
or group pages.

Press l to exit the TOP Overview screen.

You can display the time information included in the
Teletext. Follow the steps below to display the time.

Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)

Press C. The channel display will appear
on the Display.

Press  C again within the three-second
interval the channel display is on the screen.
Time information will display on the lower left
of the screen for about three seconds.

Even when you change the TV channel, you
can display the time information with steps
2 – 3 above.

• The time is not captured when a selected channel has no

Teletext information.

turned off. When you turn on the power, perform steps 1 –
4 again.

You can display the time information included in the
Teletext. Follow the steps below to display the time.

Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)

Press C. The channel display will appear
on the Display.

Press  C again within the three-second
interval the channel display is on the screen.
Time information will display on the lower left
of the screen for about three seconds.

Even when you change the TV channel, you
can display the time information with steps
2 – 3 above.

• The time is not captured when a selected channel has no

Teletext information.

turned off. When you turn on the power, perform steps 1 –
4 again.