DOWNLOAD Sharp LC-26SA1E (serv.man3) Service Manual ↓ Size: 1.59 MB | Pages: 28 in PDF or view online for FREE

AC INPUT terminal

OPC sensor

Remote control sensor

B (Standby/On) indicator

OPC indicator

a (Power button)

b (Input button)

i (l/k)

(Volume buttons)

P (s/r)

(Programme [channel] buttons)

SLEEP indicator

EXT 2 (RGB) terminal

EXT 3 terminals

Headphone jack

EXT 1 (RGB) terminal

EXT 5 (HDMI/AUDIO)
terminals

Antenna input terminal

OUTPUT (Audio) terminals

EXT 4 terminals

RS-232C terminal

LC-32SA1E_GB_a

06.7.25, 11:27 AM

6

Press a on the TV.

• The B indicator on the TV changes from red to green.

• If you are not going to use this TV for a long period of

time, be sure to remove the AC cord from the power outlet.

• Weak electric power is still consumed even when a is

turned off.

When the TV powers on for the first time after purchase,
the initial auto installation is invoked. You can
automatically set language, country and channels in
successive operations.

Setting the on-screen display language

1 Press a/b/c/d to select the desired language

listed on the screen.

2 Press OK to enter the setting.

Setting the country or area

1 Press  a/b/c/d to select your country or area

listed on the screen.

2 Press OK to enter the setting.
• The programme auto search starts at the same time.

After this setting, auto search starts with the following
order.

1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download

You do not need to do anything during the auto search.

• The initial auto installation functions only once. If the initial

auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
Setup menu. (See page 14.)

• The initial auto installation stops by pressing RETURN.

Press B on the remote control unit.

• The TV enters standby mode and the image on the screen

disappears.

• The B indicator on the TV changes from green to red.

Press a on the TV.

• The B indicator on the TV gradually turns off.
• When the TV is turned off by a, you cannot turn on the

power by pressing B on the remote control unit.

Off

Red

Green

Power off

The TV is in standby mode.

The TV is on.

You can also select the desired channel from
programme list instead of using 0-9 numeric buttons
or P (

r

r

r

r

r/s

s

s

s

s).

The setup menu disappears and you can watch the
programme on channel 1.

Press  OK when no other menu screen is
displayed. (Except external input.)

Press a/b to select the desired channel to tune
in, and then press OK.

Press END to exit the Programme List.

LC-32SA1E_GB_a

06.7.25, 11:27 AM

7

To view external source images, select the input source using b on the remote control unit or TV.

• The cables marked with * are commercially available items.

You can use the EXT 1 or 2 terminals when connecting
a VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR to the EXT 2
terminal of the TV using the fully-wired SCART cable.

• TV-VCR advanced AV Link systems may not be compatible

with some external sources.

• TV-OUT from EXT1 is not outputted when EXT5 (HDMI) is

selected as the input.

YP

B

(

C

B)

P

R

(

C

R)

COMPONENT

ø 3.5 mm stereo

minijack cable*

Component

cable*

3 RCA to 15-pin

D-sub adapter

(Supplied)

SCART cable*

SCART cable*

VIDEO

S-VIDEO

L-AUDIO-R

AV OUTPUT

You can use the EXT 2, 3, 4 or 5 (HDMI) terminals
when connecting to a DVD player and other
audiovisual equipment.

AUDIO cable*

Composite
video cable*

HDMI cable*

When using an HDMI-DVI
conversion adapter/cable,
input the Audio signal here.

S-video cable*

• When connecting an HDMI-DVI conversion adapter/cable

to the HDMI terminal, the image may not come in clearly.

• EXT 3: The S-VIDEO terminal has priority over the VIDEO

terminals.

A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 3 terminals.

• EXT 3: The S-VIDEO terminal has priority over the VIDEO

terminals.

S-video cable*

Composite
video cable*

AUDIO cable*

VIDEO

S-VIDEO

L-AUDIO-R

AV OUTPUT

LC-32SA1E_GB_a

06.7.25, 11:27 AM

8

• The cables marked with * are commercially available

items.

• The PC input terminals are DDC1/2B-compatible.
• Refer to page 23 for a list of PC signals compatible with

the TV.

• Macintosh adaptor may be required for use for some

Macintosh computers.

• When connecting to a PC, the correct input signal type is

automatically detected.

This TV incorporates three typical AV Link functions
for smooth connections between the TV and other
audiovisual equipment.

While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).

When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.

Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2
terminal.

• Refer to operation manuals of each external equipment

for the details.

• Only works when the audiovisual equipment is connected

to the EXT 2 terminal on the TV with AV Link via a fully
wired SCART.

• The use of the AV Link function is only possible if the TV-

set has enforced a complete auto-installation with the
connected audiovisual equipment (page 7, Initial auto
installation).
The availability of the AV Link function depends on the
audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.

Use the EXT 4 terminals to connect a PC.

ø 3.5 mm stereo minijack cable*

RGB cable*

RGB/DVI conversion cable*

ø 3.5 mm stereo minijack cable*

You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.

• In cases when the decoder needs to receive signal from

the TV, make sure to set “Decoder” to “EXT1” in the
Programme Setup “Manual Adjust” menu. (See page 15.)

• Do not connect the decoder to the EXT 2 terminal.

SCART cable*

LC-32SA1E_GB_b

06.7.25, 11:35 AM

9