DOWNLOAD Sharp LC-26P55E (serv.man8) Service Manual ↓ Size: 4.62 MB | Pages: 10 in PDF or view online for FREE

Model
LC-26P55E (serv.man8)
Pages
10
Size
4.62 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD / Software Updating
File
lc-26p55e-sm8.pdf
Date

Sharp LC-26P55E (serv.man8) Service Manual ▷ View online

26
 LC-26GA5E
 LC-32GA5E
  LC-26P55E
  LC-32P55E
  LC-37P55E
SOFTWARE UPDATING
There are 3 methods to update software in the VCTp: I2C method, RS-232C HyperTerminal and RS-232C Tera Term 
method.
· 
RS-232C method is allowed when the TV is working properly and the action should be only software upgrade.
· 
I2C method is required when the VCTp flash is empty or corrupted (it means, any software inside IC running).
1. RS-232C Method Description (HyperTerminal).
The hardware tools requirement are:
1. A Modem-null (Cross type) DB9 female to DB9 female cable.
2. An adaptor DB9 male to mini-Din 9 pin male cable (Sharp Code: QCNWGA015WJPZ)
3. Make the connections as indicated in the figure:
Before using RS-232C updating method is necessary to configure a Terminal PC software. HyperTerminal has been 
selected as a Terminal software because it’s include in all Windows versions as an accessory, and you can find it inside 
“Accessories\Communications” folder. For this reason, please follow carefully the next steps:
1. First time HyperTerminal is used, it’s necessary to configure some settings. Follows next action to configure two
    connection: low speed (9600bps) and high speed (115200bps).
2. Create a New Connection file with name “P55_9600bps”.
3.  Select a free COM port  and select the Port Settings properties as follows:
RS-232C METHOD DESCRIPTION. 
The hardware tools requirement are: 
1.  A Modem-null (Cross type) DB9 female to DB9 female cable. 
2.  An adaptor DB9 male to mini-Din 9 pin male cable (Sharp Code: QCNWGA015WJPZ) 
3.  Make the connections as indicated in the figure: 
Before  using  RS-232C  updating  method  is  necessary  to  configure  a  Terminal  PC  software. 
HyperTerminal  has  been  selected  as  a  Terminal  software  because  it’s  include  in  all  Windows 
versions  as  an  accessory,  and  you  can  find  it  inside  “Accessories\Communications”  folder.  For 
this reason, please follow carefully the next steps: 
1.  First  time  HyperTerminal  is  used,  it’s  necessary  to 
configure some settings. Follows next action to configure 
two  connection:  low  speed  (9600bps)  and  high  speed 
(115200bps).
2.  Create a New Connection file with name “P55_9600bps”. 
3.  Select  a  free  COM  port    and  select  the  Port  Settings 
properties as follows: 
Computer 
TV set
RS-232C METHOD DESCRIPTION. 
The hardware tools requirement are: 
1.  A Modem-null (Cross type) DB9 female to DB9 female cable. 
2.  An adaptor DB9 male to mini-Din 9 pin male cable (Sharp Code: QCNWGA015WJPZ) 
3.  Make the connections as indicated in the figure: 
Before  using  RS-232C  updating  method  is  necessary  to  configure  a  Terminal  PC  software. 
HyperTerminal  has  been  selected  as  a  Terminal  software  because  it’s  include  in  all  Windows 
versions  as  an  accessory,  and  you  can  find  it  inside  “Accessories\Communications”  folder.  For 
this reason, please follow carefully the next steps: 
1.  First  time  HyperTerminal  is  used,  it’s  necessary  to 
configure some settings. Follows next action to configure 
two  connection:  low  speed  (9600bps)  and  high  speed 
(115200bps).
2.  Create a New Connection file with name “P55_9600bps”. 
3.  Select  a  free  COM  port    and  select  the  Port  Settings 
properties as follows: 
Computer 
TV set
27
 LC-26GA5E
 LC-32GA5E
  LC-26P55E
  LC-32P55E
  LC-37P55E
4. Click on “File\Properties” menu for selecting the General and ASCII properties as follows:
5. Select “New Connection” in the File Menu.
6. Answer “Yes” to close current connection and “Yes” to save session “P55_9600bps”.
7. Create a new connection with the name “P55_115200bps”.
8. Select a the same COM port  used in item 2 and select the Port Settings properties as follows:
9. Select the same General and ASCII properties as item 3.
10.  Close  HyperTerminal  session,  answering  “Yes”  to  close  current  connection  and  “Yes”  to  save  session
       “P55_115200bps”.
To start updating session, click over “P55_9600bps” icon that you can find in the “START\All programs\Accessories\
Communications\HyperTerminal\HyperTerminal” folder and follow next procedure:
1. Check the connection between TV set and PC, sending a wrong command, as for example: “aaa”. TV set returns
    an “ERR” label as an syntaxis ERROR (Not correct order or sequence).
4.  Click  on  “File\Properties”  menu  for  selecting  the  General  and  ASCII  properties  as 
follows:
5.  Select “New Connection” in the File Menu. 
6.  Answer “Yes” to close current connection and “Yes” to save session “P55_9600bps”. 
7.  Create a new connection with the name “P55_115200bps”. 
8.  Select a the same COM port  used in item 2 and select the Port Settings properties as 
follows:
9.  Select the same General and ASCII properties as item 3. 
10. Close Hyperterminal session, answering “Yes” to close current connection and “Yes” to 
save session “P55_115200bps”. 
�� To start updating session, click over “P55_9600bps” icon that you can find in the “START\All 
programs\Accessories\Communications\HyperTerminal\HyperTerminal”  folder  and  follow  next 
procedure:
1.  Check  the  connection  between  TV  set  and  PC,  sending  a  wrong  command,  as  for 
example: “aaa”. TV set returns an “ERR” label as an syntaxis ERROR (Not correct order 
or sequence). 
4.  Click  on  “File\Properties”  menu  for  selecting  the  General  and  ASCII  properties  as 
follows:
5.  Select “New Connection” in the File Menu. 
6.  Answer “Yes” to close current connection and “Yes” to save session “P55_9600bps”. 
7.  Create a new connection with the name “P55_115200bps”. 
8.  Select a the same COM port  used in item 2 and select the Port Settings properties as 
follows:
9.  Select the same General and ASCII properties as item 3. 
10. Close Hyperterminal session, answering “Yes” to close current connection and “Yes” to 
save session “P55_115200bps”. 
�� To start updating session, click over “P55_9600bps” icon that you can find in the “START\All 
programs\Accessories\Communications\HyperTerminal\HyperTerminal”  folder  and  follow  next 
procedure:
1.  Check  the  connection  between  TV  set  and  PC,  sending  a  wrong  command,  as  for 
example: “aaa”. TV set returns an “ERR” label as an syntaxis ERROR (Not correct order 
or sequence). 
28
 LC-26GA5E
 LC-32GA5E
  LC-26P55E
  LC-32P55E
  LC-37P55E
2. Send the command “DWMD” to enter TV set in Download Mode. The TV set answer sending same symbol con-
tinuosly. If this symbol character doesn’t appear, please don’t worry and pass to next step.
3. Close this connection and open “P55_115200bps” connection clicking over the “P55_115200bps” that you can find 
in “START\All programs\Accessories\ Communications\HyperTerminal\HyperTerminal” folder.
4. Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission protocol (Xmodem) as 
show below.
5. After press “Send” button the updating process starts as follows:
6. When flash update process finishes, the “Flash Programming Complete” label appears in the screen, the device 
automatically go to switch off, and in a few seconds go to switch on again. 
VERY IMPORTANT NOTE:
During the updating time, please don’t use the PC for other purpouses, in order to abolish communication 
problems between TV set and PC. If TV set was not updated properly, the TV won’t have the software to startup 
again, and you must follow the “I2C method” to update another time the TV set.
2.  Send  the  command  “DWMD”  to  enter  TV  set  in  Download  Mode.  The  TV  set  answer 
sending same symbol continuosly. If this symbol character doesn’t appear, please don’t 
worry and pass to next step. 
3.  Close  this  connection  and  open  “P55_115200bps”  connection  clicking  over  the 
“P55_115200bps”  that  you  can  find  in  “START\All  programs\Accessories\ 
Communications\HyperTerminal\HyperTerminal” folder. 
4.  Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission 
protocol (Xmodem) as show below. 
5.  After press “Send” button the updating process starts as follows: 
6.  When flash update process finishes, the “Flash Programming Complete” label appears 
in the screen.
VERY IMPORTANT NOTE: 
During  the  updating  time,  please  don’t  use  the  PC  for  other  purpouses,  in  order  to  abolish 
communication  problems  between  TV  set  and  PC.  If  TV  set  was  not  updated  properly,  the  TV 
won’t  have  the  software  to  startup  again,  and  you  must  follow  the  “I2C  method”  to  update 
another time the TV set. 
2.  Send  the  command  “DWMD”  to  enter  TV  set  in  Download  Mode.  The  TV  set  answer 
sending same symbol continuosly. If this symbol character doesn’t appear, please don’t 
worry and pass to next step. 
3.  Close  this  connection  and  open  “P55_115200bps”  connection  clicking  over  the 
“P55_115200bps”  that  you  can  find  in  “START\All  programs\Accessories\ 
Communications\HyperTerminal\HyperTerminal” folder. 
4.  Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission 
protocol (Xmodem) as show below. 
5.  After press “Send” button the updating process starts as follows: 
6.  When flash update process finishes, the “Flash Programming Complete” label appears 
in the screen.
VERY IMPORTANT NOTE: 
During  the  updating  time,  please  don’t  use  the  PC  for  other  purpouses,  in  order  to  abolish 
communication  problems  between  TV  set  and  PC.  If  TV  set  was  not  updated  properly,  the  TV 
won’t  have  the  software  to  startup  again,  and  you  must  follow  the  “I2C  method”  to  update 
another time the TV set. 
2.  Send  the  command  “DWMD”  to  enter  TV  set  in  Download  Mode.  The  TV  set  answer 
sending same symbol continuosly. If this symbol character doesn’t appear, please don’t 
worry and pass to next step. 
3.  Close  this  connection  and  open  “P55_115200bps”  connection  clicking  over  the 
“P55_115200bps”  that  you  can  find  in  “START\All  programs\Accessories\ 
Communications\HyperTerminal\HyperTerminal” folder. 
4.  Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission 
protocol (Xmodem) as show below. 
5.  After press “Send” button the updating process starts as follows: 
6.  When flash update process finishes, the “Flash Programming Complete” label appears 
in the screen.
VERY IMPORTANT NOTE: 
During  the  updating  time,  please  don’t  use  the  PC  for  other  purpouses,  in  order  to  abolish 
communication  problems  between  TV  set  and  PC.  If  TV  set  was  not  updated  properly,  the  TV 
won’t  have  the  software  to  startup  again,  and  you  must  follow  the  “I2C  method”  to  update 
another time the TV set. 
2.  Send  the  command  “DWMD”  to  enter  TV  set  in  Download  Mode.  The  TV  set  answer 
sending same symbol continuosly. If this symbol character doesn’t appear, please don’t 
worry and pass to next step. 
3.  Close  this  connection  and  open  “P55_115200bps”  connection  clicking  over  the 
“P55_115200bps”  that  you  can  find  in  “START\All  programs\Accessories\ 
Communications\HyperTerminal\HyperTerminal” folder. 
4.  Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission 
protocol (Xmodem) as show below. 
5.  After press “Send” button the updating process starts as follows: 
6.  When flash update process finishes, the “Flash Programming Complete” label appears 
in the screen.
VERY IMPORTANT NOTE: 
During  the  updating  time,  please  don’t  use  the  PC  for  other  purpouses,  in  order  to  abolish 
communication  problems  between  TV  set  and  PC.  If  TV  set  was  not  updated  properly,  the  TV 
won’t  have  the  software  to  startup  again,  and  you  must  follow  the  “I2C  method”  to  update 
another time the TV set. 
29
 LC-26GA5E
 LC-32GA5E
  LC-26P55E
  LC-32P55E
  LC-37P55E
2. RS-232C Method Description (Tera Term)
The hardware tools requirement are:
1. A Modem-null (Cross type) DB9 female to DB9 female cable.
2. An adaptor DB9 male to mini-Din 9 pin male cable (Sharp Code: QCNWGA015WJPZ)
3. Make the connections as indicated in the figure:
Software requirements :
To upgrade VCTp software from RS-232C external connector is necessary to use a Tera Term (Pro) free software. 
 
The URL of Tera Term home page is: 
 
http://hp.vector.co.jp/authors/VA002416/teraterm.html
 
(The address may be changed in future)
Tera Term (Pro) supported operating systems:
 
MS-Windows 95 or upper
 
MS-Windows NT 3.5 and 4.0 or upper
Note.- For Windows 3.1 use Tera Term version 1.X.
Copy all the distribution files to an empty floppy disk or temporary directory (for example C:\ TEMP ).
Run SETUP.EXE and follow the instruction given by it.
After the installation, the distribution files are no longer needed, you can delete them or may keep them in the floppy 
disk.
How to use Tera Term Pro :
When the Tera Term (Pro) program is used, it’s necessary to shape some settings. Follows next action to configure 
the connection:
RS-232C METHOD DESCRIPTION. 
The hardware tools requirement are: 
1.  A Modem-null (Cross type) DB9 female to DB9 female cable. 
2.  An adaptor DB9 male to mini-Din 9 pin male cable (Sharp Code: QCNWGA015WJPZ) 
3.  Make the connections as indicated in the figure: 
Before  using  RS-232C  updating  method  is  necessary  to  configure  a  Terminal  PC  software. 
HyperTerminal  has  been  selected  as  a  Terminal  software  because  it’s  include  in  all  Windows 
versions  as  an  accessory,  and  you  can  find  it  inside  “Accessories\Communications”  folder.  For 
this reason, please follow carefully the next steps: 
1.  First  time  HyperTerminal  is  used,  it’s  necessary  to 
configure some settings. Follows next action to configure 
two  connection:  low  speed  (9600bps)  and  high  speed 
(115200bps).
2.  Create a New Connection file with name “P55_9600bps”. 
3.  Select  a  free  COM  port    and  select  the  Port  Settings 
properties as follows: 
Computer 
TV set
1. Select: 
Serial ⇒ COM X ⇒ O.K. 
Page of 10
Display

Sharp LC-26P55E (serv.man8) Service Manual ▷ Download

  • DOWNLOAD Sharp LC-26P55E (serv.man8) Service Manual ↓ Size: 4.62 MB | Pages: 10 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp LC-26P55E (serv.man8) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp LC-26P55E (serv.man8) LCD. Information contained in Sharp LC-26P55E (serv.man8) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.