DOWNLOAD Sharp LC-26P50E (serv.man24) Service Manual ↓ Size: 2.16 MB | Pages: 24 in PDF or view online for FREE

For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.

Provide high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.

Off: No detecting
Standard: Normal adjustment
Fast: Set the optimum image quality for fast-moving

images.

Slow: Set the optimum image quality for slow-moving

images.

• 3D-Y/C may not operate depending on the input signal

type or noisy input signal.

• 3D-Y/C has even more effect on composite video signals

(CVBS).

For viewing a video in monochrome.

Automatically detect a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.

Adjust the image and input signal can give you a more
beautiful picture.

Interlace: Display finely detailed images for TV or video

etc.

Progressive: Display smooth images for still images or

graphics etc.

Menu Operation: B (page 9)
You can adjust the sound quality to your preference
with the following settings.

MENU    

[Audio]

Audio

Power Control

Treble

Bass

Balance

Surround

Reset

[Off]

[0]

[0]

–15

L

+15

[0]

–15

+15

R

AV Mode

[STANDARD]

Menu Operation: A (page 9)
Surround function allows you to enjoy realistic “live”
sound.

• You can also choose surround effects by pressing

SURROUND on the remote control unit.

This option links to AV Mode in the Picture menu. (See
page 10.)

c button

d button

For weaker treble

For stronger treble

For weaker bass

For stronger bass

Decrease audio
from the right
speaker

Decrease audio
from the left
speaker

LC-26P50E_GB_b

05.8.2, 9:14 AM

11

You can run Auto Installation again, even after setting
up the preset channels.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Auto Installation”, and then
press OK.
If you already set the PIN, enter it here.

• See page 14 for setting PIN.

Press c/d to select “Yes”, and then press OK.

You can set language and country the same as in
the initial auto installation. Follow steps 1 and 2
on page 8. After this setting, auto search starts
with the following order.

1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download

You do not need to do anything during the auto
search.

You can run the Auto Installation procedure again at
any time, by accessing the Setup menu, then
Programme Setup. Channels can be tuned
automatically or manually.

MENU    

[Setup]

Setup

Option

Child Lock

Auto Installation

Programme Setup

Position

WSS

4:3 Mode

[Panorama]

[On]

[English]

[Normal]

Language

Rotate

You can automatically search for and download TV
channels  by performing the procedure below. This is
the same function as from programme auto search to
preset download in Auto Installation.

Repeat steps 1 to 4 in Programme Setup.

Press c/d to select “Yes”, and then press OK.

1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download

• See page 8 for details.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press  a/b to select “Programme Setup”, and
then press OK.
If you already set the PIN, enter it here.

• See page 14 for setting PIN.

Press  a/b to select “Auto Search”,  “Manual
Adjust”, “Sort” or “Erase Programme”, and then
press OK.

Auto Search

Manual Adjust

Sort

Erase Programme

Yes

No

Menu Operation: A (page 9)
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.

• Five minutes before the power shuts down, remaining time

displays every minute.

• When a TV programme finishes, this function may not

operate.

MENU    

[Power Control]

Audio

Power Control

No Signal Off

No Operation Off

[Disable]

[Disable]

Menu Operation: A (page 9)
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.

• Five minutes before the power shuts down, remaining time

displays every minute.

LC-26P50E_GB_b

05.6.13, 8:00 AM

12

You can set some channel items manually.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press  a/b to select “Programme Setup”, and
then press OK.
If you already set the PIN, enter it here.

• See page 14 for setting PIN.

Press  a/b to select “Manual Adjust” and then
press OK.

Press c/d to select “Yes”, and then press OK.

Press a/b/c/d to select the channel you want
to edit, and then press OK.

• The selected channel information displays.

Press a/b to select the desired menu item, and
then press OK.

Press a/b/c/d to select or adjust.

MENU    

[Setup ... Programme Setup]

Fine

Colour sys.

Sound sys.

Label

Skip

Decoder

Lock

[179.25]

[AUTO]

[B/G]

[Off]

[SAT.1]

[Off]

[Off]

179.25

MHz

• When you exit Programme Setup “Manual Adjust” menu,

preset download automatically runs if you change
information on that menu.

You can adjust the frequency to your desired position.

• Adjust while checking the background picture as a

reference.

• Instead of pressing c/d to adjust the frequency in step

8 above, you can set by directly entering the frequency
number of the channel with  0–9.

• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s OK.

When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.

Repeat steps 1 to 7 in Manual Adjust.

Channels with “Skip” set to “On” are passed over when
using  Pr/Ps even if selected while watching the
image from the TV.

When connecting a decoder to the unit, you need to
assign the terminal input.

• “Off” is factory preset value.
• “EXT1” is the recommended selection.

You can block the viewing of any channel.

• See page 14 for setting PIN.
• When Lock is set to “On” for a channel, “Child lock has

been activated.” displays, and the image and sound of
the channel are blocked.

• When pressing OK while “Child lock has been activated.”

displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.

Select the optimum colour systems to receive. (AUTO,
PAL, SECAM, NTSC 4.43, PAL-60)

Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L’)

Channel positions can be sorted freely.

Repeat steps 1 to 4 in Programme Setup.

Press c/d to select “Yes”, and then press OK.

Press a/b/c/d to select the channel you want
to move, and then press OK.

Press  a/b/c/d to move it to the desired
position, and then press OK.

Repeat steps 3 and 4 until all desired channels
are sorted.

An individual programme can be erased.

Repeat steps 1 to 4 in Programme Setup.

Press c/d to select “Yes”, and then press OK.

Press a/b/c/d to select the channel you want
to erase, and then press OK.

• A message screen pops up.

Press c/d to select “Yes”, and then press OK to
erase the selected programme. All the subsequent
programmes move up.

Repeat steps 3 and 4 until all desired channels
are erased.

Press a/b/c/d to select each character of the
new name for the channel, and then press OK.

Repeat step 2 above until the name is fully spelt
out.

• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select

“END”, then press OK.

LC-26P50E_GB_b

05.6.13, 8:00 AM

13

Allow you to use a PIN to protect certain settings from
being accidentally changed.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Child Lock”, and then press
OK.

If you already set the PIN, enter it here.

Press  a/b to select “Change PIN”, and then
press OK.

New PIN

–

–

–

Reconfirm

–

–

–

–

–

Change PIN

Cancel PIN

Enter the 4-digit number as a PIN using 0 – 9.

Enter the same 4-digit number as in step 6 to
confirm.

• “The system PIN has been changed successfully”

displays.

• To view a locked channel (Lock setting in Programme

Setup “Manual Adjust” is set to “On”), you must enter a
PIN. (See page 13.) When you select a locked channel, a
PIN prompt message pops up. Press OK to display the
PIN input window.

Allow you to reset your PIN.

Repeat steps 1 to 3 in Setting the PIN.

Enter the PIN.

Press a/b to select “Cancel PIN”, and then press
OK.

Press c/d to select “Yes”, and then press OK.

• As a precautionary measure, make a note of your PIN

For adjusting a picture’s horizontal and vertical
position.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press  a/b to select “Position”, and then press
OK.

Press a/b to select “H-Pos.” or “V-Pos.”.

Press  c/d to adjust the item to your desired
position.

WSS allows a television to switch automatically among
the different screen formats.

• Try to set WIDE MODE if an image does not switch to the

correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled. (See page 16.)

• Adjustments are stored separately according to input

H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.

You can assign each input source a label you like.

Press b to select the desired input source.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Input Label”, and then press
OK.

Press a/b/c/d to select each character of the
new name for the input source, and then press
OK.

Repeat step 5 above until the name is fully spelt
out, and then press OK.

• The name can be 6 characters or less.
• If a label name is less than 6 characters, select

“END”, then press OK.

• You cannot change the label if the input source is TV.

LC-26P50E_GB_b

05.6.13, 8:00 AM

14