Sharp LC-26LE320E Service Manual ▷ View online
2008-03-14
LC-19LE320, LC-22LE320, LC-26LE320, LC-32LE320, LC-37LE320, LC-42LE320
25
Fig.10
Step 4. Remove the Bracket and Bezel.
1. Remove the 6 screws. Detach the Bracket as Fig.11.
Fig.11
2. Remove the panel from the bezel as Fig.12
Panel:
Fig.12
Step 5. Remove the IR and Key board.
1. Disconnect 2 cables, then release the clips. Detach the IR board as Fig.13.
Fig.13
2. Disconnect 1 cable. Detach the Key board as Fig.17.
Fig.17
LC-19LE320, LC-22LE320, LC-26LE320, LC-32LE320, LC-37LE320, LC-42LE320
26
2. Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order.
Notes:
a. While re-assembling, make sure that all cables are placed and connected in their original position.
b. Pay special attention not to damage the EMC foams at the SSB shielding. Check that EMC foams are put
correctly on their places.
2008-03-14
LC-19LE320, LC-22LE320, LC-26LE320, LC-32LE320, LC-37LE320, LC-42LE320
27
REMOVING OF MAJOR PARTS(LC-32LE320)
1. Assy/Panel Removal
Notes: Please put your machine on soft material to avoid to scrape panel when you disassemble it.
Front view
Fig.1
Back view
Fig.2
Step 1. Remove the Base Assy and Base neck.
1. Remove the Base Assy as Fig.3.
Remove the 4 screws as Fig.3 and pull out the base as Fig.4
Fig.3
2. Remove the 4 screws. Detach the Base neck as Fig.4.
LC-19LE320, LC-22LE320, LC-26LE320, LC-32LE320, LC-37LE320, LC-42LE320
28
Fig.4
Step 2. Remove the REAR COVER Assy.
1. Remove the 12 screws. Detach the
REAR COVER
as Fig.5.
Fig.5
Step 3. Remove the Main, RS232, Power and MEMC board.
Fig.6
1. Remove the 8 screws and disconnect 8 cables. Detach the Main and RS232 boards as Fig.7 and Fig.8.
□
Fig.7
Fig.8
2. Remove the 6 screws and disconnect 3 cables. Detach the Power board as Fig.9.
Main board
RS232 board
Click on the first or last page to see other LC-26LE320E service manuals if exist.