Sharp LC-26GA4E (serv.man12) Service Manual / Technical Bulletin ▷ View online
LCD 2005 02 02
Date of Issue: 10
th
February 2005
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 2
Sharp Electronics (UK) Limited
Reference - LV-112
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
MODELS
LC26GA3E
LC26GA3EB
LC26GA4E
SYMPTOM Power does not turn on. The power indictor blinks twice.
CAUSE
Protection circuit is effected by noise generated as the power factor circuit starts up.
ACTION
Whenever you receive one of the models listed above for service carry out the
following circuit improvement.
following circuit improvement.
1. Remove transistor Q746.
2. Fit a jumper wire between the base of Q751 and the second pin of PC701 (refer to
2. Fit a jumper wire between the base of Q751 and the second pin of PC701 (refer to
page 2).
Note
•
DO NOT allow the wire to touch any part of the white line that indicates the border
between the primary and secondary sides of the power supply.
•
Ensure that the maximum height of the connection to Q751 and PC701 is no
greater than 3mm.
•
Ensure that the maximum height of the wire no greater than 5mm.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
-
Jumper wire, 25mm
QCNW-D638WJQZ
AE
LCD 2005 02 02
Date of Issue: 10
th
February 2005
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 2 of 2
Sharp Electronics (UK) Limited
Reference - LV-112
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
Display