Sharp LC-24LE510K Handy Guide ▷ View online
Product Dimensions
Version 1.0
Issue 11/2011
17
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Dimensions LC24LE510K
Product Dimensions
Version 1.0
Issue 11/2011
18
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Dimensions LC24LE510K
LED Flashing
Version 1.0
Issue 11/2011
19
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
LED flashing specification at the time of the error
This problem indicates a short on Vcc voltages. Protect pin should be logic high while
normal operation.
When there is a short circuit protect pin will be logic low. If you detect logic low on
protect pin, unplug the TV set and control voltage points with a multimeter to find the
shorted voltage to ground.
There may be a problem about power supply. Check 12V_VCC, 5V_VCC and 3V3_VCC with
a voltage meter.
Also there may be a problem about SW. Try to update TV with latest SW.
Electrical Adjustments
Version 1.0
Issue 11/2011
20
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Entering and exiting the adjustment process mode
1.
Turn on the TV
2.
Press “MENU” then press “4725”
From the service mode, you can enter the following sub menus and make these
adjustments (Note some area’s may be greyed out as they cannot be adjusted):
Video Settings:
Audio Settings:
Click on the first or last page to see other LC-24LE510K service manuals if exist.