DOWNLOAD Sharp LC-24LE240EK Service Manual ↓ Size: 18.35 MB | Pages: 84 in PDF or view online for FREE

COLOUR TELEVISION

DVB-T / DVB-C (HDTV), PAL

 

B/G, I 

/ SECAM

 B/G, D/K, L/L’ 

SYSTEM COLOUR TELEVISION

In the interests of user safety (required by safety 
regulations in some countries) the set should be re-
stored to its original condition and only parts identical 
to those specifi ed should be used.

CONTENTS

TABLE OF CONTENTS .......................................................................................................................      2
ELECTRICAL SPECIFICATIONS .......................................................................................................      5
IMPORTANT SERVICE SAFETY PRECAUTIONS  ................................................................................      7 
OPERATION MANUAL ...........................................................................................................................      9
DIMENSIONS .....................................................................................................................................   13 
INTRODUCTION ..................................................................................................................................   14
CIRCUIT DESCRIPTIONS ..................................................................................................................   17
SERVICE MENU SETTINGS ...........................................................................................................   49
SOFTWARE UPDATE ............................................................................................................................   53
TROUBLESHOOTING .....................................................................................................................  54
OVERAL WIRING DIAGRAM ...........................................................................................................  63
SCHEMATIC DIAGRAMS ................................................................................................................  64
PRINTED WIRING BOARD .......................................................................................................................   74
REPLACEMENT PARTS LISTING ............................................................................................... 75
CABINET AND MECHANICAL PARTS ...................................................................... 81

                       Issued: 4th May 2012

SE00LC24LE240E

   17MB62 

CHASSIS

ELECTRICAL SPECIFICATIONS 

..........................................................................5

IMPORTANT SERVICE SAFETY PRECAUTIONS....................................................7
OPERATION MANUAL...............................................................................................9
DIMENSIONS.............................................................................................................13 
INTRODUCTION........................................................................................................14
 

General Block Diagram ..............................................................................15

 

MB62 Placement of Blocks ....................................................................16

CIRCUIT DESCRIPTIONS ....................................................................................17
 Tuner 

...........................................................................................17

 Audio 

Amplifi 

er Stage with AZAD2102(U163, U164).......................19

 Audio 

Amplifi er Stage with TPA3113(U168) ...........................................22

 

Power Stage ................................................................................................24

 Microcontroller-MSTAR(U5) 

..........................................................................29

 

CI Interface ..............................................................................................34

 

USB Interface ...........................................................................................34

 

DDR2 SDRAM K4T1G164QF (U155) ...................................................35

 

Scaler and LVDS Sockets .....................................................................37

 

SPI Flash Memory-MX25L1005 (U158)................................................38

 

NAND Flash Memory- NAND512XXA2C (U162)...........................................40

 

MP2012 (U176) .........................................................................................42

 

RTA8283A (U23,U173) .....................................................................................43

 

MP1583 (U174) .......................................................................................44

 

LM1117(U175, U180, U181)...........................................................................45

 FDC642.....................................................................................................46
 FDC604P.....................................................................................................47
SERVICE MENU SETTINGS.................................................................................49
SOFTWARE UPDATE .............................................................................................53
TROUBLESHOOTING.......................................................................................54
OVERALL WIRING DIAGRAMS.............................................................................63
SCHEMATICS DIAGRAMS......................................................................................64
PRINTED WIRING BOARD.....................................................................................74
PARTS LISTING......................................................................................................75
CABINET AND MECHANICAL PARTS...................................................................81
 

MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profi le 1

for UK

Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profi le

Frequency range: 474-850 MHz  for UK  models

170-862 MHz for EU models

Transmission standard: DVB-T. MPEG-2, MPEG-4

Demodulation: COFDM with 2K/8K FFT mode

FEC: all DVB modes

Video: MP@ML, PAL, 4:3/16:9

Audio: MPEG Layer I&II 32/44.148kHz.

A01_MB62_[GB]_1910UK_IDTV_TC_PVR_BRONZE19_24942LED_ROCKER_ZIGGO_10077476_50211339.indd 38

15.03.2012 16:27:33

•  When the unit is used in a low temperature space (e.g. room, offi ce), the 

picture may leave trails or appear slightly delayed. This is not a malfunc-
tion, and the unit will recover when the temperature returns to normal.

•  Do not leave the unit in a hot or cold location. Also, do not leave the 

unit in a location exposed to direct sunlight or near a heater, as this may 
cause the cabinet to deform and the LCD panel to malfunction. Storage 
temperature: –20°C to +60°C

.

•  As a part of our policy of continuous im-

provement, SHARP reserves the right to 
make design and specifi cation  changes 
for product improvement without prior 
notice. The performance specifi cation fi g-
ures indicated are nominal values of pro-
duction units. There may   be some devia-
tions from these values in individual units.

Transmission Standards: 
DVB-C, MPEG2, DVB-C, MPEG4
i. DEMODULATION 
-Symbolrate: 4.0 Msymbols/s to 7.2 Msymbols/s
- Modulation: 16-QAM , 32-QAM ,64-QAM, 128-QAM 
and 256-QAM
ii. VIDEO
- All MPEG2 MP@ML formats with up-conversion and 
fi ltering to CCIR601 format.
-CVBS analogue output
iii. AUDIO 
-All MPEG1 Layer 1 and 2 modes
-Sampling frequencies supported are 32, 44.1 & 48 
kHz

TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)

HYPERBAND
NUMBER OF PRESET CHANNELS
1000
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50Hz.
AUDIO
German + Nicam Stereo
AUDIO OUTPUT POWER (W

2 x 2,5
POWER CONSUMPTION (W)
50 W (max)

< 0,5 W

 (Standby)

PANEL
16:9 display, 

24” (60 cm)

 Screen Size

DIMENSIONS (mm)
DxLxH (With foot): 

149 x 580,4 x 404,8

Weight (Kg): 

5,65

DxLxH (Without foot): 

35,5 x 580,4 x 379,6

Weight (Kg): 

5,00

A01_MB62_[GB]_1910UK_IDTV_TC_PVR_BRONZE19_24942LED_ROCKER_ZIGGO_10077476_50211339.indd 38

15.03.2012 16:27:33

ELECTRICAL SPECIFICATIONS

TO EXPOSED
METAL PARTS

CONNECT TO
KNOWN EARTH
GROUND

DVM

AC SCALE

1.5k ohm

10W

0.15 μF

TEST PROBE

Many electrical and mechanical parts in LCD television have special safety-related characteristics.
These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily 
increased by using replacement components rated for higher voltage, wattage, etc.
Replacement parts which have these special safety characteristics are identifi ed in this manual; electrical components 
having such features are identifi ed by    “    “.

For continued protection, replacement parts must be identical to those used in the original circuit.
The use of a substitute replacement parts which do not have the same safety characteristics as the factory recommended 
replacement parts shown in this service manual, may create shock, fi re or other hazards.

1. For continued safety, no modifi cation of any circuit should be attempted.
2. Disconnect AC power before servicing.

Before returning the receiver to the user, perform the following safety checks:
1. Inspect all lead dress to make certain that leads are not pinched, and check that hardware is not lodged between the 
chassis and other metal parts in the receiver.
2. Inspect all protective devices such as non-metallic control knobs, insulation materials, cabinet backs, adjustment and 
compartment covers or shields, isolation resistor-capacitor networks, mechanical insulators, etc.
3. To be sure that no shock hazard exists, check for leakage current in the following manner. 

•

Plug the AC cord directly into a 220~240 volt AC outlet. (Do not use an isolation transformer for this test).

•Using two clip leads, connect a 1.5k ohm, 10 watt resistor paralleled by a 0.15μF capacitor in series with all exposed metal 
cabinet parts and a known earth ground, such as electrical conduit or electrical ground connected to an earth ground.

•A true RMS reading multimeter should be used for this test, especially where the equipment uses a switch mode 
power supply which may result in very non-sinusoidal leakage current.
•Connect the resistor connection to all exposed metal parts having a return to the chassis (antenna, metal cabinet, 
screw heads, knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor.

All checks must be repeated with the AC cord plug connection reversed. (If necessary, a nonpolarized adaptor plug must 
be used only for the purpose of completing these checks.)
Any reading of 1.05V peak (this corresponds to 0.7 mA. peak AC.) or more is excessive and indicates a potential shock 
hazard which must be corrected before returning the monitor to the owner.

!

  CAUTION: FOR CONTINUED PROTECTION AGAINST A RISK OF
  FIRE REPLACE ONLY WITH SAME TYPE  
 F700, 

F701

 

(T 3.15A L250V)