Sharp LC-22SV2E (serv.man30) User Manual / Operation Manual ▷ View online
7
First Installation
When you turn on the LCD TV set for the first time, the First Installation routine, which makes installation easier, is
activated. Using this routine, you can select the on-screen display language, and automatically search for and store all
the receivable channels.
activated. Using this routine, you can select the on-screen display language, and automatically search for and store all
the receivable channels.
1
Press the (MAIN POWER)
switch. The “First installation
(Language)” screen with a list of the
languages for the on-screen display
appears.
switch. The “First installation
(Language)” screen with a list of the
languages for the on-screen display
appears.
2
Press ]/[ to select the desired
language, and then press OK. The
“First installation (Automatic
search)” screen appears in the
language selected.
language, and then press OK. The
“First installation (Automatic
search)” screen appears in the
language selected.
Note:
• You can change the on-screen
display language after the First
Installation routine by selecting
“Language” on the TV menu (see
pages 13 and 14).
Installation routine by selecting
“Language” on the TV menu (see
pages 13 and 14).
3
Press ]/[ to select the desired
adjustment item, and then press
OK. Then press </> to select the
desired item.
adjustment item, and then press
OK. Then press </> to select the
desired item.
4
Press ]/[ to select “Start search”.
OK
Back
M
End
E
First installation
(Automatic search)
(Automatic search)
Country [Germany]
Colour system [ PAL]
Sound system [ B/G]
Start search
Colour system [ PAL]
Sound system [ B/G]
Start search
(MAIN POWER)
OK
Back
M
End
E
First installation
(Language)
(Language)
English
Deutsch
Français
Español
Italiano
Nederlands
Svenska
Deutsch
Français
Español
Italiano
Nederlands
Svenska
Preparation (Continued)
OK
Back
M
End
E
First installation
(Automatic search)
(Automatic search)
Country [Germany]
Colour system [ PAL]
Sound system [ B/G]
Start search
Colour system [ PAL]
Sound system [ B/G]
Start search
5
Press OK to begin the automatic
programme search.
programme search.
When the search is completed,
the new programmes found are
displayed in yellow on the
programme list.
the new programmes found are
displayed in yellow on the
programme list.
6
Press END to exit.
Cancel
M
Start search
759.25MHz Auto-B/G
8 SHARP
1 E
2 9
2 E
4 1
3 U 2 11
4 U 4 12
5 E 5 13
6 E 8 14
7 E1 15
4 U 4 12
5 E 5 13
6 E 8 14
7 E1 15
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Start search
Search is completed
8 SHARP
1 E
2 9
2 E
4 1
3 U 2 11
4 U 4 12
5 E 5 13
6 E 8 14
7 E1 15
4 U 4 12
5 E 5 13
6 E 8 14
7 E1 15
0
0
0
0
0
0
0
0
0
0
0
0
0
0
End
E
Note:
Notes:
• AV1 is automatically switched to, when “First installation” is selected. If you selected “First installation”, and want to return to the
previous screen, press Flashback (
).
CH
MENU
E
TV/VIDEO
REVEAL
HOLD
END
M
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
WIDE
T
CH
OK
E
TV/VIDEO
REVEAL
HOLD
END
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
WIDE
T
M
T
1
2
3
4
5
6
]/[
OK
< / >
END
8
Part Names of Main Unit
Controls
Note:
Note:
• TV/VIDEO, CH( )/( ), Volume (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
CH
MENU TV/VIDEO
Volume (–)/(+)
POWER/STANDBY indicator
A green indicator lights when the power is
on and a red indicator lights when in the
standby mode (the indicator will not light
when the main power is off).
on and a red indicator lights when in the
standby mode (the indicator will not light
when the main power is off).
Remote sensor window
Remote sensor indicator
A red indicator blinks when the TV set
receives the remote control signal.
receives the remote control signal.
Upper control panel
CH (
)/(
)
MENU
TV/VIDEO
(MAIN POWER)
OPC sensor window
Speaker
OPC (Optical Picture Control)
indicator
indicator
A green indicator lights when “Brightness” is
set to “Auto”.
set to “Auto”.
To change the vertical angle of
the LCD TV set, tilt the screen
up to 5 degrees forward or 10
degrees backward. The TV set
can also be rotated 25 degrees
to right and left. Please adjust
the angle so that the TV set can
be watched most comfortably.
(See How to adjust the angle
on page 9.)
the LCD TV set, tilt the screen
up to 5 degrees forward or 10
degrees backward. The TV set
can also be rotated 25 degrees
to right and left. Please adjust
the angle so that the TV set can
be watched most comfortably.
(See How to adjust the angle
on page 9.)
Speaker
9
Part Names of Main Unit (Continued)
Terminals
L
R
AUDIO O
UT
AV-IN 1
RGB
AV-IN
2
S-VID
EO
VIDEO
L
R
AUDIO
POWE
R
INPUT
DC13
V
L
R
AUDIO
OUT
AV-IN 1
RGB
AV-IN 2
S-VIDEO
VIDEO
L
R
AUDIO
POWER
INPUT
DC13V
Carrying handle
Rear View
POWER INPUT DC13V
AV-IN 1
(21pin Euro-SCART)
S-VIDEO
VIDEO
AUDIO (L)
AUDIO (R)
AV-IN 2
Antenna
AUDIO OUT (L)
AUDIO OUT (R)
Headphones
AUDIO OUT (R)
Headphones
Tilt the display by grabbing onto
the carrying handle while securely
holding down the stand with your
other hand.
the carrying handle while securely
holding down the stand with your
other hand.
How to adjust the angle
10
Part Names of Remote Control
CH
MENU
E
TV/VIDEO
REVEAL
HOLD
END
M
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
WIDE
T
CH
OK
E
TV/VIDEO
REVEAL
HOLD
END
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
WIDE
T
M
T
OK
(P.7)
SUBTITLE
Displays the Teletext
Subtitle directly.
(P.36)
HOLD
Temporarily holds the
current Teletext page.
(P.36)
(Mute)
Switches the sound on and off.
(P.12)
Switches the sound on and off.
(P.12)
Yellow,
Timer function Menu
(P.31)
Timer function Menu
(P.31)
Cyan, Status Display
Turns on the status display
when the menu is not
displayed. (P.24)
Turns on the status display
when the menu is not
displayed. (P.24)
TV/VIDEO
Switches the input source
between AV1, AV2 and
TV mode. (P.11)
Switches the input source
between AV1, AV2 and
TV mode. (P.11)
Channel Select
(P.12)
MENU
Displays the TV menu.
(P.13)
Displays the TV menu.
(P.13)
Volume (+)/(-)
(P.12)
(Flashback)
Returns to the previous
channel. (P.7)
Red, Picture Menu
(P.15)
Upwards / Downwards
Selection, zoom display
function (Teletext mode)
(P.7)
Selection, zoom display
function (Teletext mode)
(P.7)
END
Returns to normal screen.
(P.7)
Returns to normal screen.
(P.7)
TEXT
Displays the Teletext mode
screen. (P.34)
Displays the Teletext mode
screen. (P.34)
(Power)
(P.11)
SOUND
Switches the sound
mode. (P.32)
REVEAL
Displays hidden information
such as solutions to riddles
and puzzles. (P.36)
Displays hidden information
such as solutions to riddles
and puzzles. (P.36)
Right / Left Selection
(P.7)
SUBPAGE
Displays the Teletext
Subpage directly.
(P.35)
Displays the Teletext
Subpage directly.
(P.35)
ROTATE
Rotates the display in every
direction. (P.24)
Rotates the display in every
direction. (P.24)
WIDE
Selects the wide image mode.
(P.16)
Green, Sound Menu
(P.17)
CH ( )/( )
Displays previous/next page.
(Teletext mode) (P.12)
Displays previous/next page.
(Teletext mode) (P.12)
Click on the first or last page to see other LC-22SV2E (serv.man30) service manuals if exist.