Sharp LC-22D12E (serv.man2) User Manual / Operation Manual ▷ View online
• Connect the power cord to the 220-240V AC, 50 Hz. Then the
standby LED lights up.(The led will blink during the standby On/Off)
• To switch on the TV from standby mode either:
standby LED lights up.(The led will blink during the standby On/Off)
• To switch on the TV from standby mode either:
• Press the
button, P+ / P- or a numeric button on the remote
control or press the
button, + / - on the TV. The TV will then
switch on.
By either method the TV will switch on.
5
4
3
2
Quick Start Guide
Insert the batteries into the handset
Connect the aerial straight to your TV
Connect the TV to the mains socket
To switch the TV on
Starting Auto Setup Procedure
Note: You can press MENU button to cancel.
After all the available stations are stored, Channel List will be
displayed on the screen. If you like to sort channels according
to the LCN, please select “Yes” and than press OK.
After all the available stations are stored, Channel List will be
displayed on the screen. If you like to sort channels according
to the LCN, please select “Yes” and than press OK.
To select the HDMI input, press the “SOURCE” button on the remote
control. Each time it is pressed the on-screen menu confirms your
selection.
control. Each time it is pressed the on-screen menu confirms your
selection.
To HDMI connection on the device
50152361
insert plug...
1
Insert two
AAA/R3 or
equivalent type
batteries inside.
Observe the
correct polarity
(+/-) when
inserting batteries
and replace the
battery cover.
AAA/R3 or
equivalent type
batteries inside.
Observe the
correct polarity
(+/-) when
inserting batteries
and replace the
battery cover.
REAR OF THE TV
Set Top Box
connection
connection
...and switch on
insert plug...
UK plug
1. Switch the “
” button to position “|” so the TV will switch
to standby mode. Then the standby LED lights up.
To switch on the TV from standby mode either:
2. Press the “
” button,
or a numeric button on the
remote control.
3. Press the “
” or
button on the TV.
P+ / P-
+ / -
By either method the TV will switch on.
Important note: Ensure that the aerial is connected before switching
on the TV for the first time installation.
on the TV for the first time installation.
Note: Do not turn off the TV while initializing first time installation.
When the TV is turned on for the first time, the menu for the language
selection appears on the screen. The message “Welcome please
select your language!” is displayed in all language options
sequentially in the menu screen.
By pressing or buttons highlight the language you want to set and
press “OK”. After selecting the language, “Welcome!” screen will be
displayed, requiring you to set Country,Teletext Language and
Scan Encrypted options.
When the TV is turned on for the first time, the menu for the language
selection appears on the screen. The message “Welcome please
select your language!” is displayed in all language options
sequentially in the menu screen.
By pressing or buttons highlight the language you want to set and
press “OK”. After selecting the language, “Welcome!” screen will be
displayed, requiring you to set Country,Teletext Language and
Scan Encrypted options.
Use navigation buttons to set the required options. When finished,
press OK button on the remote control and the following message will
be displayed on the screen:
press OK button on the remote control and the following message will
be displayed on the screen:
Select YES by using the Left or Right button and and press OK
button to start search. Afterwards, the following OSD will be displayed
on the screen and the television will search for broadcasts.
button to start search. Afterwards, the following OSD will be displayed
on the screen and the television will search for broadcasts.
6
HDMI to HDMI Cable Connection
7
HDMI input
50177107
兓䝟䵂㘰彛䝂嵟㌹〲啋录䭟䥄呖归佃䭅剟〷〲㘵張〱㜷
〴⁅歩洠㈰⁐慺慲瑥獩‱㐺ㄷ㨳
Display
