DOWNLOAD Sharp LC-20S1E (serv.man4) Service Manual ↓ Size: 504.22 KB | Pages: 2 in PDF or view online for FREE

Model
LC-20S1E (serv.man4)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
504.22 KB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD / -4
File
lc-20s1e-sm4.pdf
Date

Sharp LC-20S1E (serv.man4) Service Manual ▷ View online

5
LC-20S1E
OPERATION MANUAL
12
°
35
°
P
a
rt
 Names of Main Unit
Controls
Note:
TV/VIDEO
,
CH (
)/(
)
 (–)/(+) (Volume) 
and
MENU
 on the main unit have the same functions as the same buttons on the remote
control. Fundamentally, 
this operation manual provides a description based on operation using the remote control.
Headphone jack
Plug the headphone mini-plug into the Headphone jack located on
the front of the TV set.
OPC sensor
Remote sensor
OPC sensor indicator (Optical Picture Control)
The Optical Picture Control indicator lights up green when the
Brightness is set to Auto. 
POWER/STANDBY/Remote 
sensor indicator
A green indicator lights when the power is on and a red indicator
lights when in the standby mode (the indicator will not light when the
main power is off). A red indicator blinks when the TV set receives
the remote control signal.
 (–)/(+) (Volume)
Upper control panel
CH (
)/(
)
MENU
TV/VIDEO
 (MAIN POWER)
The screen can be adjusted
backwards to an angle between
12 degrees and 35 degrees.
The screen cannot be set up
straight.  When changing the
angle, make sure to hold the
stand and adjust the screen to
the best viewable angle.
Speaker
Adjustable range
Terminals
POWER INPUT DC 12V
Antenna
AV-IN
1
(21-pin Euro-SCART)
AUDIO OUT (R)
AUDIO OUT (L)
Rear View
Carrying handle
AUDIO (R)
AUDIO (L)
VIDEO
S-VIDEO
AV-IN2
The screen can be adjusted back-
wards to an angle between 12 and 35
degrees.
When changing the angle, make sure
to hold the stand and adjust to the
best viewable angle.
*
Be careful to prevent the product from
falling over when adjusting the angle.
Also place the product on a stable
base.
Stand
Round lock for Kensington
Security Standard Slot.
6
LC-20S1E
P
a
rt
 Names of Remote Contr
ol
CH
MENU
E
REVEAL
HOLD
END
M
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
W
ID
E
T
CH
OK
E
TV/VIDEO
REVEAL
HOLD
END
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
B
R
IG
H
T
T
M
T
BRIGHT
Selects the brightness
and OPC of the display.
HOLD
Temporarily holds the
current Teletext page.
(Power)
OK, Programme Table
SUBTITLE
Displays the Teletext
Subtitle directly.
SOUND
Switches the sound
mode. 
Right / Left Selection
Red, Picture Menu
Green, Sound Menu
 (+)/(-) (Volume)
Channel Select
(Flashback)
Returns to the previous
 channel. 
SUBPAGE
Displays the Teletext
Subpage directly.
TEXT
Displays the Teletext mode
screen. 
REVEAL
Displays hidden information
such as solutions to riddles
and puzzles. 
ROTATE
Rotates the display in every
direction. 
END
Returns to normal screen.
Upwards/Downwards
Selection, zoom display
function
 (Teletext mode)
MENU
Displays the TV menu.
Cyan, Status Display
Turns on the status display
when the menu is not
displayed. 
Yellow,
Timer function Menu
 (Mute)
Switches the sound on and off.
CH (
)/(
)
Displays previous/next page.
(Teletext mode) 
TV/VIDEO
Switches the input source
between AV1, AV2 and
TV mode. 
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two R-03 (
“AAA
” size, UM/SUM-4) batteries supplied in the remote
control. When the batteries become depleted and the remote control fails to operate, replace the batteries with new R-03
(“
AAA
” size, UM/SUM-4) batteries.
1
Open the battery cover.
2
Insert two R-03 (
“AAA
” size,
UM/SUM-4) batteries.
3
Replace the battery cover.
Position the positive and
negative ends of the
batteries as indicated in
the compartment.
Caution!
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
Place batteries with their terminals corresponding to the (+) and (
) indications.
Different types of batteries have different characteristics. 
Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe it off with a cloth.
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.
Engaging the lower
claw with the remote
control, close the
cover.
Slide the cover while
pressing 
the 
(   ) 
part.
+
+
î
Display

Sharp LC-20S1E (serv.man4) Service Manual ▷ Download

  • DOWNLOAD Sharp LC-20S1E (serv.man4) Service Manual ↓ Size: 504.22 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp LC-20S1E (serv.man4) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp LC-20S1E (serv.man4) LCD. Information contained in Sharp LC-20S1E (serv.man4) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.