DOWNLOAD Sharp LC-20E1E (serv.man24) Service Manual ↓ Size: 2.54 MB | Pages: 58 in PDF or view online for FREE

• The influence of the AV control voltage and of fast blank at programme positions from 1 to 199

can be set.

• When connecting a video device to the AV1 terminal, you need to adjust the decoder programme

settings.

Perform steps 1 and 2 in
[1] AV1/AV2 to display the “AV
connections” screen.

Press ]/[ to select “For
programmes”, and then press OK
to display the “For programmes”
screen.

Press ]/[ to select the “AV
control voltage” or “RGB on-
screen display”.

Press </> to select “yes” or “no”.

• If the item concerned is set to “yes”,

the appropriate picture is through-
connected at all programme
positions from 1 to 199 when a
control voltage/an RGB signal is
applied.

Press ]/[ to select “For decoder
connected to AV1”, and then
press OK to display the decoder
programme selection screen.

Press ]/[ and/or </> to select
the programme for the decoder,
and then press OK. Repeat the
same procedure if you want to
specify other decoder
programmes.

Press MENU to return to the “For
programmes” screen.

Press ]/[ to select “Sound from
AV1”, and then press </> to
select the desired sound source.

Press END to exit.

E

CH

TV/VIDEO

REVEAL

HOLD

END

M

MENU

SOUND

SUBTITLE

OK

SUBPAGE

TEXT

ROTATE

BRIGHT

T

]/[

</>

OK

Back

M

End

E

For programmes

AV control voltage            [  no]
RGB on-screen display      [  no]
For decoder connected to AV1
Sound from AV1                  [Dec.]

OK

Back

M

End

E

For programmes

AV control voltage            [  no]
RGB on-screen display      [  no]
For decoder connected to AV1
Sound from AV1                  [Dec.]

OK

Back

M

End

E

AV connections

AV1
AV2(Y/C)
AV2(CVBS)
For programmes

OK

Back

M

End

E

For programmes

AV control voltage            [ no]
RGB on-screen display      [ no]
For decoder connected to AV1
Sound from AV1                  [Dec.]

0

OK

Back

M

End

E

0
0

0

0
0
0

0

0

0

0

0

 For decoder connected to AV1

  

    

      8 E 9      16 E54

  1 S 6      9 E1       17 E56

  2 S 8     1  E11      18 E57

  3 S1      11 E36      19 

  4 S11     12 E37      2   

  5 E 3     13 E38      21 

  6 E 5     14 E5       22 

  7 E 6     15 E53      23

E

CH

TV/VIDEO

REVEAL

HOLD

END

M

MENU

SOUND

SUBTITLE

OK

SUBPAGE

TEXT

ROTATE

BRIGHT

T

]/[

Press Yellow to display the
“Timer functions” screen.

• The “ Timer functions” screen can

also be displayed by selecting
“Timer functions” in the TV menu.
(see pages 15 and 16.)

Press ]/[

 to select “Time”, and

then press OK.

Input the current time
(HH:MM:SS) with Channel
Select.

Press ]/[ to select the desired
item. (See the table below.)

Press </> to make the
adjustment. If you select “00:00”
for “Switch off” or “Alarm”, input
the desired time with Channel
Select.

Press END to exit.

</>

HH:MM:SS

no     HH:MM

no     HH:MM

0 – 39

Time

Switch off

Alarm

Alarm volume

The time can be manually set.

The LCD TV set automatically turns off at
the specified time everyday.

The alarm sound turns on at the specified
time everyday.

The volume of the alarm sound is selected.

OK

Back

M

End

E

Timer functions

Time      [  :  :  ]
Switch off   [   no]
Alarm        [   no]
Alarm volume [     ]

0

This enables the selection of the reception mode when receiving a NICAM-I or NICAM-B/G signal. To let
you enjoy NICAM broadcasting, this LCD TV set receives NICAM system stereo, bilingual, and monaural
broadcasts.

Stereo
The LCD TV set is receiving a stereo
broadcast.
• Each time you press SOUND, the

mode changes between “Stereo”
and “Mono”.

• When “Mono” is selected, the TV

sound is output monaurally.

Bilingual
When the LCD TV set is receiving a
bilingual programme, the “Sound 1”
mode is automatically selected.
• Each time you press SOUND, the

mode changes as follows:
Sound 1 

→ Sound 2 → Sound 1+2

→  Mono

Monaural
The LCD TV set is receiving a
monaural broadcast.
• Each time you press SOUND, the

mode changes between “Nicam”
and “Mono”.

• If approximately 3 seconds pass without a button being pressed, the mode setting is automatically terminated and

the LCD TV set returns to the normal mode.

• The setting can be individually selected for each channel number.

• You can also turn off the NICAM mode by setting the “Loudsp. sound” item to “Mono” in the Sound screen, which is

displayed when you press Green (see page 18).

E

CH

TV/VIDEO

REVEAL

HOLD

END

M

MENU

SOUND

SUBTITLE

OK

SUBPAGE

TEXT

ROTATE

BRIGHT

T

This enables the selection of the reception mode when receiving an IGR-B/G signal. To let you enjoy IGR
broadcasting, this LCD TV set receives IGR system stereo and bilingual broadcasts.

Stereo
The LCD TV set is receiving a stereo
broadcast.
• Each time you press SOUND, the

mode changes between “Stereo”
and “Mono”.

• When “Mono” is selected, the TV

sound is output monaurally.

Bilingual
When the LCD TV set is receiving a
bilingual programme, the “Sound 1”
mode is automatically selected.
• Each time you press SOUND, the

mode changes as follows:
Sound 1 

→ Sound 2 → Sound 1+2

→  Mono

E

CH

TV/VIDEO

REVEAL

HOLD

END

M

MENU

SOUND

SUBTITLE

OK

SUBPAGE

TEXT

ROTATE

BRIGHT

T

• If approximately 3 seconds pass without a button being pressed, the mode setting is automatically terminated and

the LCD TV set returns to normal mode setting.

• The setting can be selected individually for each channel number.

• You can also turn off the IGR mode by setting the “Loudsp. sound” item to “Mono” in the Sound screen, which is

displayed when you press Green (see page 18).