Sharp LC-19SH7E Service Manual / Specification ▷ View online
2008-03-14
LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU
41
No picture on the display (1)
↓
The picture doesn't appear in all modes.
MAIN UNIT:
↓
↓NO
YES
↓YES
PANEL_UNIT:
↓YES
↓YES
No picture on the display (2)
↓
Does not the picture come out when VHF/UHF is received?
TERMINAL UNIT:
↓
MAIN_UNIT:
↓YES
↓YES
Is LCD controller's control signal normal?
Is the above-mentioned LVDS signals output to connector CN751?
NO
Check the line between IC U400 and CN751.
NO
Control signals BRIGHT_ADJ, INVERTER_ON_OFF,
PANEL_VCC_ON/OFF, and it peels off and whether normality is
checked.
PANEL_VCC_ON/OFF, and it peels off and whether normality is
checked.
Check the panel module.
Similarly, is the LVDS signal input to connector of the panel
module?
module?
NO
Wire harness is checked.
Is LVDS signal output from 1st_channel and 2nd_channel of IC U400 in each mode?
(A0N/A0P),(A1N/A1P),(A2N/A2P),(A3N/A3P),(CK1N/CK1P)
(A0N/A0P),(A1N/A1P),(A2N/A2P),(A3N/A3P),(CK1N/CK1P)
Check IC U400 and its peripheral control circuits.
Is picture signal input from pin (24) of TUNER (TU201) to pin
(AB24) of IC U400?
(AB24) of IC U400?
Is TUNER_CVBS signal output from pin (24) of TUNER (TU201)?
NO
Check whether I2C is normally accessed between TU201 and IC
U400.
U400.
NO
Check the line between IC U400 and TU201.
Refer to “The picture doesn't appear in all modes.”
LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU
42
No picture on the display (3)
↓
Does not the picture come out when DTV is received?
TERMINAL UNIT:
↓
↓YES
↓YES
MAIN_UNIT:
↓YES
↓YES
↓YES
<External input SCART1>No picture on the display (4)
↓
Does not the picture of the CVBS signal input to SCART1 go out?
TERMINAL UNIT:
↓
MAIN_UNIT:
↓YES
↓YES
Is IF signal output from pin (20), (21) of TUNER (TU201) to pin
(R25), pin (T25) of IC U400 ?
(R25), pin (T25) of IC U400 ?
Is the voltage of regulation for a TUNER circuit and the power
supply terminal of IC U400 supplied?
supply terminal of IC U400 supplied?
NO
Each power supply circuit is checked.
NO
Check the tuner, IC U400 and their peripheral circuits. Replace
as required.
as required.
NO
Is MPEG data (TS0INDATA0, TS0INSYNC, TS0INCLK,
TS0INVALID) from IC U400 are output to pin (9), pin (7), pin (6), pin
(8) of a IC U401?
TS0INVALID) from IC U400 are output to pin (9), pin (7), pin (6), pin
(8) of a IC U401?
is communication control carried out between pin (12)(SCL),
pin(13)(SDA), of TU201, and pin(F24)(TUNER_SCL1), pin
(F25)(TUNER_SDA1), of IC U400?
pin(13)(SDA), of TU201, and pin(F24)(TUNER_SCL1), pin
(F25)(TUNER_SDA1), of IC U400?
Is MPEG data (TS_DATAO, TS_CKO, TS_VALIDO, TS_SYNCO)
from IC U401 are output to pin (B21/A21/B20/C21) of a IC U400?
from IC U401 are output to pin (B21/A21/B20/C21) of a IC U400?
NO
Is the control signal between IC U401 and IC U400 normal?
(RESET_CI, etc.).
(RESET_CI, etc.).
Do X300 (60.00MHz)/ X400 (27MHz) oscillate?
NO
Check X300/ X400 and its peripheral circuits.
Refer to “The picture doesn't appear in all modes.”
Is CVBS signal sent to pin (20) of SCART1 (CN500)?
NO
Check the setting of an external input device that connects of
CN500.
CN500.
Refer to “The picture doesn't appear in all modes.”
Is CVBS signal sent to pin (AE24) of IC U400?
NO
Check the line between IC U400 and CN500.
2008-03-14
LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU
43
<External input SCART1>No picture on the display (5)
↓
Does not the picture of the R/G/B video signal input to SCART1 go out?
TERMINAL UNIT:
↓
MAIN_UNIT:
↓YES
↓YES
<External input SCART1 >No picture on the display (6)
↓
Does not the picture of the Y/C signal input to SCART1 go out?
TERMINAL UNIT:
↓
MAIN_UNIT:
↓YES
↓YES
<External input AV3(Composite)>No picture on the display (7)
↓
Does not the picture of the composite video signal input to AV3(Composite) go out?
TERMINAL UNIT:
↓
MAIN_UNIT:
↓YES
↓YES
Is RGB signal sent to pin (15)/R, (11)/G, (7)/B, of SCART1
(CN500)?
(CN500)?
NO
Check the setting of an external input device that connects of
CN500.
CN500.
Refer to “The picture doesn't appear in all modes.”
Is RGB signal sent to pin (AF24)/R, (AD24)/G, (AD23)/B of IC
U400?
U400?
NO
Check the line between IC U400 and CN500.
Is Y/C signal sent to pin (20) and (15) of SCART1 (CN500)?
NO
Refer to “The picture doesn't appear in all modes.”
Is Y/C signal sent to pin (AE24)/Y, (AF25)/C of IC U400?
NO
Check the line between IC U400 and CN500.
Check the setting of an external input device that connects of
CN500.
CN500.
Is CVBS signal sent to pin (2) of AV3 (CN650) ?
NO
Check the setting of an external input device that connects of
CN650.
CN650.
Refer to “The picture doesn't appear in all modes.”
Is CVBS signal sent to pin (AC24) of IC U400?
NO
Check the line between IC U400 and CN650.
LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU
44
<External input HDMI1>No picture on the display (8)
↓
Does not the picture of the HDMI signal input to HDMI1 go out?
MINI AV_UNIT:
↓
↓
YES
↓NO
YES
↓YES
<External input VGA>No picture on the display (9)
↓
Does not the picture of the PC IN(ANALOG) video signal input to VGA(15pin-D-SUB terminal) go out?
TERMINAL_UNIT:
↓
MAIN_UNIT:
↓YES
↓YES
Is the HOT_PLUG detection function of pin (19) of a HDMI terminal
(CN700) normal?
(CN700) normal?
NO
Check the line between pin (AB5) of IC U400 and CN700.
Refer to “The picture doesn't appear in all modes.”
Check the connection and setup with the external HDMI devices.
Are EDID data pin (6)(SCL) of IC U701 (EEPROM), pin (5)(SDA)
accessed, and is it read from pin (15), pin (16) of a HDMI
terminal(CN700)?
accessed, and is it read from pin (15), pin (16) of a HDMI
terminal(CN700)?
NO
Is access possible in the re-writing or exchange of EDID data of
IC U701?
IC U701?
Check CN700, IC U701 and peripheral circuits.
Is TMDS signal input into pin(AF18, AE18)/RX2±,(AF17,
AE17)/RX1±, (AF16, AE16)/RX0±, (AF15, AE15)/RXC± of IC U400?
AE17)/RX1±, (AF16, AE16)/RX0±, (AF15, AE15)/RXC± of IC U400?
Check the line between IC U400 and CN700.
NO
Is R/G/B/H/V signal sent to pin (1)/R, (2)/G, (3)/B, (14)/H, (13)/V of
VGA (CN554)?
VGA (CN554)?
NO
Check the setting of an external input device that connects of
CN554.
CN554.
Refer to “The picture doesn't appear in all modes.”
Is R/G/B/H/V signal sent to pin (AE20)/R, (AE19)/G, (AD19)/B,
(AC18)/H, (AB18)/V of IC U400?
(AC18)/H, (AB18)/V of IC U400?
NO
Check the line between IC U400 and CN554.
Click on the first or last page to see other LC-19SH7E service manuals if exist.