Sharp LC-19SH7E (serv.man2) User Manual / Operation Manual ▷ View online
Balance:
•
Sets the balance of the left and right
speakers to best fit your listening position.
Virtual Surround:
Virtual Surround:
•
Automatically switches the
TV to the best surround sound mode available
from a broadcast. Select
on or off.
Digital audio out:
•
Selects the type of digital
audio out to
pCm / off / Dolby Digital.
aVl (auto volume leveling):
•
Reduces
sudden volume changes, for example, during
commercials or when switching from one
channel to another. Select
on or off.
type:
•
(Only available for Digital channels.)
Selects the type of audio broadcast.
normal:
*
Sets regular audio only.
Hard of Hearing:
*
Sets the mix of hearing
impaired audio with regular audio.
audio Description:
audio Description:
*
Sets the mix of visually
impaired audio with regular audio.
audio Description:
•
(Only appears when you
select
menu / eXit > Sound > type > audio
Description): Adjusts the volume of visually
impaired audio.
Press
4�
≤≥ to select / adjust the item to the
desired level.
Follow the on-screen instructions to exit.
5�
use Sound mode
Apart from manually adjusting sound settings, you
can use
Sound mode to set your TV to a predefined
sound setting.
Press
1�
menu / eXit on the remote control and
select
Sound.
Press
2�
oK or ≥ to enter Sound and select
Sound mode�
Press
3�
≤≥ to select one of the following
settings:
•
personal
music
music
•
Speech
•
Follow the on-screen instructions to exit.
4�
tV menu
tV
The first time you set up your TV, you are prompted to
select an appropriate menu language and to perform
automatic installation of TV and digital radio channels
(If available).
This chapter provides instructions on how to reinstall
channels as well as other useful channel installation
features.
note
Re-installing channels modifies the channel list.
•
Select a digital audio language
Press
1�
menu / eXit on the remote control and
select
tV.
Press
2�
oK or ≥ to enter tV menu.
Press
3�
<> to select
1st audio or 2nd audio.
Highlight your selection and press
4�
≤≥ to select
an audio language.
Follow the on-screen instructions to exit.
5�
note
If your selected audio language is not broadcasted, the
•
default audio language will be displayed.
automatically install channels
This section describes how to search and store
channels automatically. Instructions are for both digital
and analogue channels.
E
Step 1: Select your menu language
Press
1�
menu / eXit on your remote control and
select
Features ≥ menu language.
Press
2�
≤≥ to select your language.
Follow the on-screen instructions to exit.
3�
E
Step 2: Select your country
Select the country where you are located. The TV
installs and arranges channels according to your
country.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Country.
Press
2�
≤≥ or to select your country.
Follow the on-screen instructions to exit.
3�
12
tV menu
E
Step 3: automatic installation
Your TV searches and stores all available digital and
analogue TV channels as well as all available digital
radio channels.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Channels�
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Select
2�
Channel Scan and press oK or ≥ to
start channel installation. The installation may
take a few minutes.
When complete, follow the on-screen
3�
instructions to exit.
update Scan
update Scan has similar function with Channel Scan.
The difference is you could update channel list without
erasing the original information.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Channels.
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
update Scan and press
oK or ≥ to start channel update.
When complete, follow the on-screen
3�
instructions to exit.
Single rF Scan
If using digital broadcasts, you can check the quality
and signal strength of digital channels. This allows you
to reposition and test your antenna or satellite dish.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Channels.
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
Single rF Scan and press
oK or ≥ to enter.
Back
EXIT
Sound
Picture
TV
Features
Parental
Eco
Menu
0 %
Scan single RF channel. (Digital Only)
RF Channel
Signal Strength
Signal Quality
Signal Strength
Signal Quality
22
53
Good
53
Good
Scan
OK
Highlight the
3�
rF Channel box, and press ≤≥
to select a channel number you preferred to
scan.
Press
4�
oK to start scanning.
When the scan is completed, the result of
5�
signal strength and signal quality appear on the
screen.
Follow the on-screen instructions to exit.
6�
note
If the signal quality and strength is poor, reposition
•
the antenna or satellite dish and retest.
If you have further problems with the reception of
•
your digital broadcast, contact a specialised installer.
analogue manual Scan
This section describes how to search and store
analogue TV channels manually.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Channels.
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
analogue manual Scan
and press
oK or ≥ to enter.
Back
EXIT
Sound
Picture
TV
Features
Parental
Eco
Menu
Search for analogue channels
Start Frequency (MHz)
Scan Up
Scan Down
Scan Up
Scan Down
45.00
13
tV menu
In the
3�
Start Frequency (mHz) box, enter the
frequency by using the
digit buttons on the
remote control.
Press
4�
<> to select
Scan up or Scan Down to
scan the next available analogue channel from
the frequency you have entered.
Press
5�
oK or ≥ to start scanning.
When complete, follow the on-screen
6�
instructions to exit.
Channel Skip
Channel skip allows you to skip one or more channels
when pressing
p <> on the remote control to switch
between channels.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Channels�
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
Channel Skip and press
oK or ≥ to enter the channel list.
Press
3�
<> to select one or more channels you
preferred to skip.
Press
4�
oK to mark or cancel.
Follow the on-screen instructions to exit.
5�
note:
To watch the skipped channels, enter the channel
•
numbers by using the
digit buttons on the remote
control or select from
pr liSt.
Channel Sort
Channel sort allows you to reorder the channels in the
pr liSt.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Channels�
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
Channel Sort and press
oK or ≥ to enter the channel list.
Press
3�
<> to select one channel and press
oK
to mark.
Press
4�
<> to select another channel and press
oK to mark. The two channels your marked are
exchanged.
Repeat step 3 to 4 to reorder more channels.
5�
Follow the on-screen instructions to exit.
6�
Channel edit
Channel edit allows you to change the channel number
or the channel name.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Channels�
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
Channel edit and press
oK or ≥ to enter the channel list.
Press
3�
<> to select one channel you prefer to
edit.
Press
4�
oK to enter.
Set
OK
Sound
Picture
TV
Features
Parental
Eco
Menu
Transmitter
Auto
Channel Number:
Channel Name:
Frequency:
Colour System:
Sound System:
Channel Name:
Frequency:
Colour System:
Sound System:
BG
805
NOVA
498
CESKE RADIOKOMU...
Select
Back
EXIT
Press
5�
<> to highlight one of the following:
Channel number:
•
Enter a new channel
number by using the
digit buttons on the
remote control
Channel name:
Channel name:
•
Press the
digit buttons on
the remote control to rename the channel.
Please refer to the graphic below for available
characters. (Press each button repeatedly to
change between characters.)
0-9 digit buttons with available characters
EPG
YPbPr
ABC1
DEF2
GHI3
JKL4
MNO5
PQR6
STU7
VWX8
YZ9
+-.
0
PRE PR
14
tV menu
Features
Change picture format
Change the picture format to suit your content.
Press
1�
∏ repeatedly to select one of the
following picture formats. Alternatively, press
menu / eXit and select Features > picture
format.
P
auto
The Automatic format for
DTV transports streams
with AFD information,
while for ATV and SCART
should be with WSS
information.
normal (not for HD)
Displays the classic 4:3
format.
note
Constant use of the
•
normal picture format can cause
screen distortion.
Zoom 1 (not for HD)
Scales the classic 4:3
format to 14:9.
Frequency:
•
Use
digit buttons on the remote
control to enter the frequency. (Only for
analogue channels).
Colour System:
Colour System:
•
Press ≤≥ to select the colour
system. (Only for analogue channels)
Sound System:
Sound System:
•
Press ≤≥ to select the sound
system. (Only for analogue channels)
Follow the on-screen instructions to exit.
6�
note
The new channel number you have entered can not
•
override the exist one.
analogue Ch Fine tune
You can manually fine tune analogue channels when
reception is poor.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Channels.
note
You are prompted to enter current password to enter
•
Channels if Channel Block / parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
analogue Ch Fine tune
and press
oK or ≥ to enter the analogue
channel list.
Press
3�
<> to select one channel and press
oK
to enter.
Press
4�
≤≥ to adjust the frequency.
When complete, press
5�
oK to set the frequency.
The fine tuned channel is stored under the
current channel number.
Follow the on-screen instructions to exit.
6�
assign a channel decoder (For atV)
Decoders that decode channels can be connected
to SCART. You have to assign the TV channel as a
channel to be decodered. Before selecting channels,
make sure your TV is connected to SCART.
Press
1�
menu / eXit on the remote control and
select
tV ≥ Channels�
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
Decoder and press oK or
≥ to enter available analogue channel list.
Press
3�
<> to select the channel to decode.
Press
4�
oK to mark or cancel.
Follow the on-screen instructions to exit.
5�
15
Click on the first or last page to see other LC-19SH7E (serv.man2) service manuals if exist.