Sharp LC-19LE430E Service Manual ▷ View online
2008-03-14
LC-19LE430E, LC-22LE430E, LC-26LE430, LC-32LE430E
17
Fig.4
Step 2. Remove the REAR COVER Assy.
1. Remove the 5 screws. Detach the
REAR COVER
as Fig.5.
Fig.5
Note: How to easy remove rear cabinet
Step 3. Remove the Main, Power and the Speakers.
Put left hand on the center of rear cabinet
Right hand fingers put under the machine rim
Press down
Pull up
Pull up
Pull up
Pull up
LC-19LE430E, LC-22LE430E, LC-26LE430E, LC-32LE430E
18
Fig.6
1. Disconnect 4 cables and remove the 5 screws. Detach the Main board as Fig.7 and Fig.8.
Note: Please disconnect the LVDS cable from the panel firstly, then disconnect the LVDS from the main board.
If you disconnect the LVDS cable with the Main board firstly, maybe the panel connector will be damaged because of the short LVDS cable.
Fig.7 Fig.8
2. Disconnect 2 cables and remove the 4 screws. Detach the Power board as Fig.9.
Note: Push out the AC port from the Bracket, then disconnect the AC cable with the power board.
Fig.9
3. Release the speaker cable from its clamp, pull up and remove the speaker as Fig.10.
2008-03-14
LC-19LE430E, LC-22LE430E, LC-26LE430, LC-32LE430E
19
Fig.10
Step 4. Remove the Bracket and Bezel.
1. Remove the 11 screws. Detach the Bracket and panel as Fig.11.
Fig.11
2. Remove the panel from the bezel as Fig.12.
Fig.12
Step 5. Remove the IR and Key board.
1. Disconnect 1 cable. Detach the IR board as Fig.16.
Fig.16
2. Disconnect 1 cable. Detach the Key board as Fig.17.
Fig.17
LC-19LE430E, LC-22LE430E, LC-26LE430E, LC-32LE430E
20
2. Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order.
Notes:
a. While re-assembling, make sure that all cables are placed and connected in their original position.
b. Pay special attention not to damage the EMC foams at the SSB shielding. Check that EMC foams are put
correctly on their places.
Click on the first or last page to see other LC-19LE430E service manuals if exist.