Sharp LC-19D1EWH (serv.man5) Service Manual ▷ View online
LC-19D1E/S-BK/WH
4 – 9
No sound from external input devices (3)-3
No sound from EXT5 (AUDIO) connecting an external input
device.
<EXT5>
Is PC-S-L audio signal input from J401 to pin (7) of IC301?
Is PC-S-R audio signal input from J401 to pin (3) of IC301?
YES
Is PC-S-L audio signal input to pin (42) of IC501 (AV-SW)?
Is PC-S-R audio signal input to pin (40) of IC501 (AV-SW)?
Is PC-S-R audio signal input to pin (40) of IC501 (AV-SW)?
NO
Check Connector SC1202 pins (9) and (10), Connector SC501
pins (9) and (10) and short circuit.
pins (9) and (10) and short circuit.
YES
Is the audio signal (TERMINAL-L/R) properly output from pins
(34) and (33) of IC501 (AV-SW)?
(34) and (33) of IC501 (AV-SW)?
NO
Check the Power supply input of pin(38) of IC501, or SDA2/SCL2
signal of pins (28) and (29) or peripheral circuits.
signal of pins (28) and (29) or peripheral circuits.
YES
Is the audio signal (LOUT2/ROUT2) output properly from pins
(25) and (23) of IC302 (A-CODEC) ?
(25) and (23) of IC302 (A-CODEC) ?
NO
Check pins (1) and (4) of IC302 (A-CODEC) , pins (11) and (12)
of Connector SC1202, audio-mute line (Q301/Q302) or periph-
eral circuits.
of Connector SC1202, audio-mute line (Q301/Q302) or periph-
eral circuits.
YES
Is the audio signal L-CH output to pins (44-45) and (40-41) of
IC303 (POWER-AMP)? Is the audio signal R-CH output to pins
(20-21) and (16-17) of IC303 (POWER-AMP) normally ?
IC303 (POWER-AMP)? Is the audio signal R-CH output to pins
(20-21) and (16-17) of IC303 (POWER-AMP) normally ?
NO
Check UR12V power supply input pins (47) and (14) of IC303
(POWER-AMP) or peripheral circuits.
(POWER-AMP) or peripheral circuits.
YES
Is the audio signal of pins (1)-(4) of SP-Connector (P301) prop-
erly output?
erly output?
NO
Check SP-CONNECTOR (P301) and short circuit.
YES
Check SP-BOX (right and left) and WIRE HARNESS.
LC-19D1E/S-BK/WH
4 – 10
No sound except from speakers (4)-1
No audio output from headphone (J505).
(AV-UNIT)
Is there audio output signal on pins (2) and (3) of the headphone
terminal (J505)?
Is there audio output signal on pins (2) and (3) of the headphone
terminal (J505)?
YES
Check Headphone terminal (J505) and the connection to an
external device.
external device.
NO
Is “H” signal at base of Q527, Q526?
YES
Pin (D11) of IC801 (DVP-M2) should usually be “L”.
If “H” signal, check IC801 and peripheral circuits.
If “H” signal, check IC801 and peripheral circuits.
(MAIN-UNIT)
NO
Is the audio output signal of pins (30) and (29) of IC302 (A-
CODEC) proper?
CODEC) proper?
YES
Check pins (12) and (11) of Connector SC1203, pins (12) and
(11) of Connector P502 and peripheral circuits.
(11) of Connector P502 and peripheral circuits.
(AV-UNIT)
NO
Is the audio output signal (TERMINAL-L/R) properly output from
pins (34) and (33) of IC501 (AV-SW)?
pins (34) and (33) of IC501 (AV-SW)?
YES
Check pins (11) and (12) of Connector SC1202, pins (11) and
(12) of Connector P501 and peripheral circuits.
(12) of Connector P501 and peripheral circuits.
(MAIN-UNIT)
NO
Is the audio output signal (MPX-A-L/R) properly output from pins
(11) and (15) of IC301 (A-Selector)?
(11) and (15) of IC301 (A-Selector)?
YES
Check pins (9) and (10) of Connector SC1202, pins (9) and (10)
of Connector P501 and peripheral circuits.
of Connector P501 and peripheral circuits.
NO
Is the audio output signal (DVPM2-L/R) properly output from pins
(B23) and (D23) of IC801 (DVP-M2)?
(B23) and (D23) of IC801 (DVP-M2)?
YES
Check the AUDIO signal line between IC301 and IC801, or
peripheral circuits.
peripheral circuits.
NO
Check the power supply input B3.3V pins (R19) and (D5), B1.5V
pins (D12) of IC801 (DVP-M2) or peripheral circuits.
pins (D12) of IC801 (DVP-M2) or peripheral circuits.
No sound except from speakers (4)-2
No audio output from EXT1 (SCART1) terminal.
Checklist:
1) Is the MUTE button on the remote control set to ON?
• • • Set to OFF.
2) Check the connection to external devices.
• • • Is there any improper connection?
Is audio signal output to pins (3) and (1) of EXT1 (SC501)?
YES
Confirm EXT1 (SC501) and the connection to an external eivice.
NO
Is the audio output signal (L/R-OUT) output to pins (7) and (1) of
IC506 (A-AMP)?
IC506 (A-AMP)?
NO
Is the audio output signal (DVPM2-L/R) properly output from pins
(B23) and (D23) of IC801 (DVP-M2)?
(B23) and (D23) of IC801 (DVP-M2)?
YES
Check pins (20) and (21) of Connector SC1202, pins (20) and
(21) of Connector P501 and peripheral circuits.
(21) of Connector P501 and peripheral circuits.
NO
Check the power supply B3.3V pins (R19) and (D5), B1.5V pins
(D12) of IC801 (DVP-M2) or peripheral circuits.
(D12) of IC801 (DVP-M2) or peripheral circuits.
LC-19D1E/S-BK/WH
4 – 11
<0n input of the DTVtuner> No picture on the display (1)-1
No picture appears on LCD during the DTV tuner reception.
YES
Checklist:
1) Is "INPUT SOURCE" button
1) Is "INPUT SOURCE" button
on the remote control set up correctly ?
• • • set it as "DTV" with the INPUT SOURCE button
on the
remote control.
2) Is MENU-Picture-Backlight/Contrast/Brightness set to "MIN" ?
• • • Set it to an appropriate level.
3) Is the level of pin (9)(8) of tuner (TU201) at "H"?
• • • These are serial communications lines (I2C) for the control. If it is "L", check whether
something pulls it to "L". (IC801 (A5)(C4)pin)
(AV-UNIT)
YES
Is the DTV-R/G/B signal output from pin (4)/(3)/(2) of Connector
P503?
Is the DTV-CVBS signal output from pin (6) of connector P503?
P503?
Is the DTV-CVBS signal output from pin (6) of connector P503?
YES
Is the DTV-R/G/B signal input to pin (9)/(1)/(14) of IC507(SW)?
Is the DTV-CVBS signal input to pin (4) of IC508(SW)?
Is the DTV-CVBS signal input to pin (4) of IC508(SW)?
NO
Check the course between Connector P503 and IC507(SW).
Check the course between Connector P503 and IC508(SW).
Check the course between Connector P503 and IC508(SW).
YES
Is the SC-R/G/B signal output from pin (6)/(3)/(5) of IC507(SW)?
Is the DTV-CVBS signal output from pin (2) of IC508(SW)?
Is the DTV-CVBS signal output from pin (2) of IC508(SW)?
NO
Check pins (13) of B9V line of IC507, and soldering.
Check pins (3) of B9V line of IC508, and soldering.
Check pins (3) of B9V line of IC508, and soldering.
(MAIN-UNIT)
YES
Is the SC-R/G/B signal input to pin (N1)/(J1)/(K2) of IC801(DVP-
M2)?
Is the DTV-CVBS signal input to pin (W1) of IC801(DVP-M2)?
M2)?
Is the DTV-CVBS signal input to pin (W1) of IC801(DVP-M2)?
NO
Check pins (16)/(17)/(18) of Connector SC1203, (16)/(17)/(18)
of Connector P502 and peripheral circuits. (At the RGB signal).
Check pins (14) of Connector SC1203, (14) of Connector P502
and peripheral circuits. (At the CVBS signal)
of Connector P502 and peripheral circuits. (At the RGB signal).
Check pins (14) of Connector SC1203, (14) of Connector P502
and peripheral circuits. (At the CVBS signal)
YES
Is LVDS video signal (RA
± ~ RD ±) output from pins (P22)(P23) -
(V22)(V23) of IC801 (DVP-M2), and is RCLK signal (RCLK
±) out-
put from pins (U22) (U23)?
NO
Check pins (R19)/(D5) of B3.3V line of IC801 (DVP-M2), pins
(D12) of B1.5V line, pins (B6)(A6) of SDA1/SCL1 line and
peripheral circuits.
(D12) of B1.5V line, pins (B6)(A6) of SDA1/SCL1 line and
peripheral circuits.
YES
Is RSDS-R/G/B signal (R[0:2]
±, G[0:2]±, B[0:2]±) output from
pins (53) -(72) of IC9201 (RSDS-TRANSMITTER) , and is CLK
signal (CK
signal (CK
±) output from pins (60) and (59)?
NO
Check pins (1) and (9) of B3.3V line of IC9201 (RSDS-TRANS-
MITTER), short circuits and peripheral circuits.
MITTER), short circuits and peripheral circuits.
YES
Is RSDS-R/G/B signal (R[0:2]
±, G[0:2]±, B[0:2]±) and CLK signal
(CK
±) input to connector (SC9201) of LCD-PANEL?
(RSDS-R signal:22-27pin, RSDS-G signal:57-62pin, RSDS-B sig-
nal:66-71pin, CK
nal:66-71pin, CK
±signal:33/32pin)
NO
Check whether there is short-circuit at connector SC9201 of
LCD-PANEL and also check peripheral circuits.
LCD-PANEL and also check peripheral circuits.
YES
Is liquid crystal drive power supply input to Connector SC9201 of
LCD-PANEL?
(VLS-B14.6V=40/41/42pin, VGH_B32V=5/6pin,VGL_-6V=2/3pin,
COM-BIAS=75/76/77pin)
LCD-PANEL?
(VLS-B14.6V=40/41/42pin, VGH_B32V=5/6pin,VGL_-6V=2/3pin,
COM-BIAS=75/76/77pin)
NO
Please check REGULATOR-circuit of a defective voltage
respectively.
respectively.
YES
Replace LCD-PANEL.
LC-19D1E/S-BK/WH
4 – 12
<0n input of the DTVtuner> No picture on the display (1)-2
No picture appears on LCD during the
DTV tuner reception.
DTV tuner reception.
YES
Checklist:
1) Is "INPUT SOURCE" button
1) Is "INPUT SOURCE" button
on the remote control set up correctly ?
• • • set it as "DTV" with the INPUT SOURCE button
on the
remote control.
2) Is MENU-Picture-Backlight/Contrast/Brightness set to "MIN" ?
• • • Set it to an appropriate level.
3) Is the level of pin (9)(8) of tuner (TU201) at "H"?
• • • These are serial communications lines (I2C) for the control. If it is "L", check whether
something pulls it to "L". (IC801 (A5)(C4)pin)
(AV-UNIT)
YES
(DIGITAL-UNIT)
Is the DTV-R/G/B signal output from
pin (4)/(3)/(2) of Connector P503?
Is the DTV-CVBS signal output from
pin (6) of connector P503?
pin (4)/(3)/(2) of Connector P503?
Is the DTV-CVBS signal output from
pin (6) of connector P503?
NO
Is the DTV-R/G/B signal output from
pin (15)/(16)/(17) of IC4001(D-PRO-
CESSOR)? Is the DTV-CVBS sig-
nal output from pin (18) of IC4001?
pin (15)/(16)/(17) of IC4001(D-PRO-
CESSOR)? Is the DTV-CVBS sig-
nal output from pin (18) of IC4001?
YES
Check connector SC4602 and
IC4603. Check Q4601.
IC4603. Check Q4601.
NO
Is the serial- signal (TOUTD[7]) input
to pin (36) of IC4001(D-PROCES-
SOR)?
to pin (36) of IC4001(D-PROCES-
SOR)?
YES
Check pins (3-129)/(151-212)/(8-
204) of 3.3V/2.5V/1.2V power line of
IC4001, pins (6)(7) of I2C line, and
soldering.
204) of 3.3V/2.5V/1.2V power line of
IC4001, pins (6)(7) of I2C line, and
soldering.
(AV-UNIT)
NO
Is the serial signal (FED[7]) output
from pin (33)-(43) of IC202(DVB-T)?
from pin (33)-(43) of IC202(DVB-T)?
YES
Check pins(3) of Connector SC4601
or pins(3) of connector P202.
or pins(3) of connector P202.
NO
Is the digital-IF signal IF(D1/D2) input
to pin (10)/(11) of IC202(DVB-T)?
to pin (10)/(11) of IC202(DVB-T)?
YES
Check pins (22)/(2)/(19) of 3.3V/
2.5V/1.0V power supply input of
IC202(DVB-T), pins (29)/(30) of I2C
line, and soldering.
2.5V/1.0V power supply input of
IC202(DVB-T), pins (29)/(30) of I2C
line, and soldering.
NO
Is the Digital-IF signal IF(D1/D2) out-
put from pin (17)/(16) of Tuner
(TU201)?
put from pin (17)/(16) of Tuner
(TU201)?
NO
Check the B5V/B5V(CONT)/IF5V
power supply input pin (11)/(1)/(3) of
TUNER (TU201), pins (9)(8) of I2C
line, and soldering.
power supply input pin (11)/(1)/(3) of
TUNER (TU201), pins (9)(8) of I2C
line, and soldering.
NO
Replace Tuner (TU201).
Click on the first or last page to see other LC-19D1EWH (serv.man5) service manuals if exist.